[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1-6.slh.1-aptosid-amd64 (Debian 3.1-26) (s.l-h@gmx.de) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP PREEMPT Thu Dec 22 21:21:36 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1-6.slh.1-aptosid-amd64 root=UUID=5b027533-c09b-4df9-873c-a2fa2bb2b1d1 ro radeon.modeset=1 quiet splash resume=UUID=da60d2e6-b17f-4aed-991d-cb94eee42667 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000008f08d000 (usable) [ 0.000000] BIOS-e820: 000000008f08d000 - 000000008f58d000 (reserved) [ 0.000000] BIOS-e820: 000000008f58d000 - 000000008fbcf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000008fbcf000 - 000000008fbff000 (ACPI data) [ 0.000000] BIOS-e820: 000000008fbff000 - 000000008fc00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000014f000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 4535s/168B, BIOS 68CPC Ver. F.05 07/29/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x14f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFF0000000 write-back [ 0.000000] 2 base 00FFE00000 mask FFFFE00000 write-protect [ 0.000000] 3 base 00FFE10000 mask FFFFFF0000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000014f000000 aka 5360M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x8fc00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000008fc00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 008fc00000 page 2M [ 0.000000] kernel direct mapping tables up to 8fc00000 @ 1fffe000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000014f000000 [ 0.000000] 0100000000 - 0140000000 page 1G [ 0.000000] 0140000000 - 014f000000 page 2M [ 0.000000] kernel direct mapping tables up to 14f000000 @ 8f08b000-8f08d000 [ 0.000000] RAMDISK: 361c4000 - 370da000 [ 0.000000] ACPI: RSDP 00000000000f2f00 00014 (v00 HPQOEM) [ 0.000000] ACPI: RSDT 000000008fbfe038 00040 (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP 000000008fbfd000 00074 (v01 HPQOEM 168B 00000003 HP 00000001) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 000000008fbd8000 225DF (v01 HPQOEM 168B 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 000000008fb8f000 00040 [ 0.000000] ACPI: APIC 000000008fbfc000 00084 (v01 HPQOEM 168B 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 000000008fbfb000 0003C (v01 HPQOEM 168B 00000001 HP 00000001) [ 0.000000] ACPI: HPET 000000008fbd5000 00038 (v01 HPQOEM 168B 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 000000008fbd4000 0072C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 000000008fbd2000 0190A (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SSDT 000000008fbd1000 0078F (v01 HP AMDSGTBL 00000001 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000014f000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000014f000000 [ 0.000000] NODE_DATA [000000014efec000 - 000000014effffff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0014f000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0008f08d [ 0.000000] 0: 0x0008fbff -> 0x0008fc00 [ 0.000000] 0: 0x00100000 -> 0x0014f000 [ 0.000000] On node 0 totalpages: 909340 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 565454 pages, LIFO batch:31 [ 0.000000] Normal zone: 5056 pages used for memmap [ 0.000000] Normal zone: 318528 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000008f08d000 - 000000008f58d000 [ 0.000000] PM: Registered nosave memory: 000000008f58d000 - 000000008fbcf000 [ 0.000000] PM: Registered nosave memory: 000000008fbcf000 - 000000008fbff000 [ 0.000000] PM: Registered nosave memory: 000000008fc00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 8fc00000 (gap: 8fc00000:50400000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014ec00000 s75648 r8192 d22656 u524288 [ 0.000000] pcpu-alloc: s75648 r8192 d22656 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 887895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1-6.slh.1-aptosid-amd64 root=UUID=5b027533-c09b-4df9-873c-a2fa2bb2b1d1 ro radeon.modeset=1 quiet splash resume=UUID=da60d2e6-b17f-4aed-991d-cb94eee42667 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3490876k/5488640k available (3123k kernel code, 1851280k absent, 146484k reserved, 2325k data, 640k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 29360128 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1896.923 MHz processor. [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.84 BogoMIPS (lpj=1896923) [ 0.001009] pid_max: default: 32768 minimum: 301 [ 0.001035] Security Framework initialized [ 0.001040] SELinux: Disabled at boot. [ 0.002429] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003935] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004637] Mount-cache hash table entries: 256 [ 0.004789] Initializing cgroup subsys cpuacct [ 0.004795] Initializing cgroup subsys memory [ 0.004810] Initializing cgroup subsys devices [ 0.004813] Initializing cgroup subsys freezer [ 0.004815] Initializing cgroup subsys net_cls [ 0.004818] Initializing cgroup subsys blkio [ 0.004825] Initializing cgroup subsys perf_event [ 0.004857] tseg: 008fc00000 [ 0.004859] CPU: Physical Processor ID: 0 [ 0.004862] CPU: Processor Core ID: 0 [ 0.004864] mce: CPU supports 6 MCE banks [ 0.005397] ACPI: Core revision 20110623 [ 0.016453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026789] CPU0: AMD A4-3300M APU with Radeon(tm) HD Graphics stepping 00 [ 0.026998] Performance Events: AMD PMU driver. [ 0.026998] ... version: 0 [ 0.026998] ... bit width: 48 [ 0.026998] ... generic registers: 4 [ 0.026998] ... value mask: 0000ffffffffffff [ 0.026998] ... max period: 00007fffffffffff [ 0.026998] ... fixed-purpose events: 0 [ 0.026998] ... event mask: 000000000000000f [ 0.040027] Booting Node 0, Processors #1 [ 0.040035] smpboot cpu 1: start_ip = 99000 [ 0.112001] Brought up 2 CPUs [ 0.112004] Total of 2 processors activated (7586.62 BogoMIPS). [ 0.112515] devtmpfs: initialized [ 0.116156] PM: Registering ACPI NVS region at 8f58d000 (6561792 bytes) [ 0.116249] NET: Registered protocol family 16 [ 0.116470] Extended Config Space enabled on 0 nodes [ 0.116490] ACPI: bus type pci registered [ 0.116622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.116626] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.150212] PCI: Using configuration type 1 for base access [ 0.150299] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.150302] mtrr: probably your BIOS does not setup all CPUs. [ 0.150304] mtrr: corrected configuration. [ 0.150619] bio: create slab at 0 [ 0.150619] ACPI: Added _OSI(Module Device) [ 0.150619] ACPI: Added _OSI(Processor Device) [ 0.150619] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.150619] ACPI: Added _OSI(Processor Aggregator Device) [ 0.152723] ACPI: EC: Look up EC in DSDT [ 0.572119] ACPI: Interpreter enabled [ 0.572126] ACPI: (supports S0 S3 S4 S5) [ 0.572154] ACPI: Using IOAPIC for interrupt routing [ 0.575463] ACPI: Power Resource [APPR] (off) [ 0.578144] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.578152] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 0.578170] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.578176] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 0.580531] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.580761] ACPI: No dock devices found. [ 0.580764] HEST: Table not found. [ 0.580768] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.581019] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.581197] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.581201] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.581204] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.581207] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.581210] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.581212] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.581215] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.581218] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.581221] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.581224] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.581226] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.581229] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.581232] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.581235] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.581238] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.581241] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.581243] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xdfffffff] [ 0.581246] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfffdffff] [ 0.581254] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) [ 0.581259] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff]) [ 0.581272] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600 [ 0.581314] pci 0000:00:01.0: [1002:9648] type 0 class 0x000300 [ 0.581325] pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref] [ 0.581332] pci 0000:00:01.0: reg 14: [io 0x7000-0x70ff] [ 0.581340] pci 0000:00:01.0: reg 18: [mem 0xd8100000-0xd813ffff] [ 0.581377] pci 0000:00:01.0: supports D1 D2 [ 0.581395] pci 0000:00:01.1: [1002:1714] type 0 class 0x000403 [ 0.581405] pci 0000:00:01.1: reg 10: [mem 0xd8144000-0xd8147fff] [ 0.581451] pci 0000:00:01.1: supports D1 D2 [ 0.581521] pci 0000:00:03.0: [1022:1708] type 1 class 0x000604 [ 0.581567] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.581572] pci 0000:00:03.0: PME# disabled [ 0.581594] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604 [ 0.581640] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.581643] pci 0000:00:04.0: PME# disabled [ 0.581668] pci 0000:00:05.0: [1022:170a] type 1 class 0x000604 [ 0.581714] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.581718] pci 0000:00:05.0: PME# disabled [ 0.581787] pci 0000:00:07.0: [1022:170c] type 1 class 0x000604 [ 0.581834] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.581838] pci 0000:00:07.0: PME# disabled [ 0.581936] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03 [ 0.581960] pci 0000:00:10.0: reg 10: [mem 0xd8148000-0xd8149fff 64bit] [ 0.582054] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.582060] pci 0000:00:10.0: PME# disabled [ 0.582104] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03 [ 0.582127] pci 0000:00:10.1: reg 10: [mem 0xd814a000-0xd814bfff 64bit] [ 0.582223] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold [ 0.582228] pci 0000:00:10.1: PME# disabled [ 0.582267] pci 0000:00:11.0: [1022:7800] type 0 class 0x000101 [ 0.582287] pci 0000:00:11.0: reg 10: [io 0x7118-0x711f] [ 0.582298] pci 0000:00:11.0: reg 14: [io 0x7124-0x7127] [ 0.582310] pci 0000:00:11.0: reg 18: [io 0x7110-0x7117] [ 0.582321] pci 0000:00:11.0: reg 1c: [io 0x7120-0x7123] [ 0.582333] pci 0000:00:11.0: reg 20: [io 0x7100-0x710f] [ 0.582344] pci 0000:00:11.0: reg 24: [mem 0xd8151000-0xd81517ff] [ 0.582368] pci 0000:00:11.0: set SATA to AHCI mode [ 0.582399] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03 [ 0.582415] pci 0000:00:12.0: reg 10: [mem 0xd8150000-0xd8150fff] [ 0.582495] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03 [ 0.582517] pci 0000:00:12.2: reg 10: [mem 0xd814f000-0xd814f0ff] [ 0.582597] pci 0000:00:12.2: supports D1 D2 [ 0.582599] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.582605] pci 0000:00:12.2: PME# disabled [ 0.582629] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03 [ 0.582645] pci 0000:00:13.0: reg 10: [mem 0xd814e000-0xd814efff] [ 0.582727] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03 [ 0.582749] pci 0000:00:13.2: reg 10: [mem 0xd814d000-0xd814d0ff] [ 0.582829] pci 0000:00:13.2: supports D1 D2 [ 0.582832] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.582837] pci 0000:00:13.2: PME# disabled [ 0.582862] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05 [ 0.582954] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403 [ 0.582979] pci 0000:00:14.2: reg 10: [mem 0xd8140000-0xd8143fff 64bit] [ 0.583045] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.583050] pci 0000:00:14.2: PME# disabled [ 0.583066] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601 [ 0.583152] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604 [ 0.583201] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03 [ 0.583217] pci 0000:00:14.5: reg 10: [mem 0xd814c000-0xd814cfff] [ 0.583299] pci 0000:00:15.0: [1022:43a0] type 1 class 0x000604 [ 0.583371] pci 0000:00:15.0: supports D1 D2 [ 0.583407] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 [ 0.583443] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 [ 0.583475] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 [ 0.583509] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 [ 0.583548] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 [ 0.583580] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 [ 0.583611] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 [ 0.583643] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 [ 0.583778] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300 [ 0.583797] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.583813] pci 0000:01:00.0: reg 18: [mem 0xd8000000-0xd801ffff 64bit] [ 0.583824] pci 0000:01:00.0: reg 20: [io 0x6000-0x60ff] [ 0.583842] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.583868] pci 0000:01:00.0: supports D1 D2 [ 0.585971] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 0.585986] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] [ 0.585995] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff] [ 0.586006] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.586088] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.586107] pci 0000:02:00.0: reg 10: [io 0x5000-0x50ff] [ 0.586133] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.586150] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.586200] pci 0000:02:00.0: supports D1 D2 [ 0.586202] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.586208] pci 0000:02:00.0: PME# disabled [ 0.587973] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.587989] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff] [ 0.587997] pci 0000:00:04.0: bridge window [mem 0xd7000000-0xd7ffffff] [ 0.588008] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.588081] pci 0000:03:00.0: [197b:2392] type 0 class 0x000880 [ 0.588102] pci 0000:03:00.0: reg 10: [mem 0xd6003000-0xd60030ff] [ 0.588170] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.588242] pci 0000:03:00.2: [197b:2391] type 0 class 0x000805 [ 0.588260] pci 0000:03:00.2: reg 10: [mem 0xd6002000-0xd60020ff] [ 0.588389] pci 0000:03:00.3: [197b:2393] type 0 class 0x000880 [ 0.588407] pci 0000:03:00.3: reg 10: [mem 0xd6001000-0xd60010ff] [ 0.589989] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 0.590005] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff] [ 0.590013] pci 0000:00:05.0: bridge window [mem 0xd6000000-0xd6ffffff] [ 0.590024] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.590090] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280 [ 0.590114] pci 0000:04:00.0: reg 10: [mem 0xd5000000-0xd500ffff 64bit] [ 0.590195] pci 0000:04:00.0: supports D1 [ 0.590197] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.590203] pci 0000:04:00.0: PME# disabled [ 0.591971] pci 0000:00:07.0: PCI bridge to [bus 04-06] [ 0.591986] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff] [ 0.591995] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd5ffffff] [ 0.592006] pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref] [ 0.592130] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode) [ 0.592142] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.592145] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.592149] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.592152] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.592155] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.592158] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.592161] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.592164] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.592167] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.592170] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.592173] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.592176] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.592179] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.592182] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.592185] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode) [ 0.592188] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfffdffff] (subtractive decode) [ 0.592298] pci 0000:00:15.0: PCI bridge to [bus 08-08] [ 0.592306] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff] [ 0.592311] pci 0000:00:15.0: bridge window [mem 0xd4000000-0xd4ffffff] [ 0.592318] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.592352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.592654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX0._PRT] [ 0.592700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.592750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.592798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.592857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.592993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT] [ 0.593215] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.593485] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.593487] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.600341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600420] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600501] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600580] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600642] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600735] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.600979] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.600989] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.600995] vgaarb: loaded [ 0.600996] vgaarb: bridge control possible 0000:01:00.0 [ 0.600998] vgaarb: bridge control possible 0000:00:01.0 [ 0.601075] PCI: Using ACPI for IRQ routing [ 0.610780] PCI: pci_cache_line_size set to 64 bytes [ 0.610919] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.610922] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.610925] reserve RAM buffer: 000000008f08d000 - 000000008fffffff [ 0.610929] reserve RAM buffer: 000000008fc00000 - 000000008fffffff [ 0.610931] reserve RAM buffer: 000000014f000000 - 000000014fffffff [ 0.611029] NetLabel: Initializing [ 0.611031] NetLabel: domain hash size = 128 [ 0.611033] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.611047] NetLabel: unlabeled traffic allowed by default [ 0.611101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.611106] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.612933] Switching to clocksource hpet [ 0.613079] pnp: PnP ACPI init [ 0.613087] ACPI: bus type pnp registered [ 0.613221] pnp 00:00: [bus 00-ff] [ 0.613224] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.613227] pnp 00:00: [io 0x0d00-0xffff window] [ 0.613230] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.613232] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.613235] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.613238] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.613240] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.613243] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.613246] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.613248] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.613251] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.613254] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.613256] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.613259] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.613262] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.613264] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.613267] pnp 00:00: [mem 0xb0000000-0xdfffffff window] [ 0.613270] pnp 00:00: [mem 0xf0000000-0xfffdffff window] [ 0.613273] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.613343] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.613360] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.613365] pnp 00:01: [mem 0xfeb00000-0xfeb00fff] [ 0.613367] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.613370] pnp 00:01: [mem 0xfec10000-0xfec10fff] [ 0.613372] pnp 00:01: [mem 0xfed61000-0xfed61fff] [ 0.613375] pnp 00:01: [mem 0xfed80000-0xfed80fff] [ 0.613377] pnp 00:01: [mem 0xfed81000-0xfed81fff] [ 0.613380] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.613430] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.613433] system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved [ 0.613437] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.613440] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.613444] system 00:01: [mem 0xfed61000-0xfed61fff] has been reserved [ 0.613447] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.613450] system 00:01: [mem 0xfed81000-0xfed81fff] has been reserved [ 0.613454] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.613457] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.613610] pnp 00:02: [io 0x0000-0x000f] [ 0.613612] pnp 00:02: [io 0x0081-0x008f] [ 0.613615] pnp 00:02: [io 0x00c0-0x00df] [ 0.613617] pnp 00:02: [dma 4] [ 0.613648] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.613658] pnp 00:03: [io 0x00f0-0x00fe] [ 0.613549] Switched to NOHz mode on CPU #0 [ 0.613673] pnp 00:03: [irq 13] [ 0.613707] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.613710] Switched to NOHz mode on CPU #1 [ 0.613710] pnp 00:04: [io 0x0061] [ 0.613710] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.613710] pnp 00:05: [io 0x0010-0x001f] [ 0.613710] pnp 00:05: [io 0x002e-0x002f] [ 0.613710] pnp 00:05: [io 0x004e-0x004f] [ 0.613710] pnp 00:05: [io 0x0072-0x0073] [ 0.613710] pnp 00:05: [io 0x0080] [ 0.613710] pnp 00:05: [io 0x00b0-0x00b1] [ 0.613710] pnp 00:05: [io 0x0092] [ 0.613710] pnp 00:05: [io 0x0400-0x04cf] [ 0.613710] pnp 00:05: [io 0x04d0-0x04d1] [ 0.613710] pnp 00:05: [io 0x04d6] [ 0.613710] pnp 00:05: [io 0x0680-0x06ff] [ 0.613710] pnp 00:05: [io 0x077a] [ 0.613712] pnp 00:05: [io 0x0c00-0x0c01] [ 0.613714] pnp 00:05: [io 0x0c14] [ 0.613717] pnp 00:05: [io 0x0c50-0x0c52] [ 0.613719] pnp 00:05: [io 0x0c6c] [ 0.613721] pnp 00:05: [io 0x0c6f] [ 0.613723] pnp 00:05: [io 0x0cd0-0x0cdb] [ 0.613725] pnp 00:05: [io 0x0220-0x0227] [ 0.613728] pnp 00:05: [io 0x0260-0x0273] [ 0.613730] pnp 00:05: [io 0x0800] [ 0.613732] pnp 00:05: [io 0x0804] [ 0.613734] pnp 00:05: [io 0x087f] [ 0.613736] pnp 00:05: [io 0x0cdc-0x0cdf] [ 0.613738] pnp 00:05: [io 0x00b8] [ 0.613740] pnp 00:05: [io 0x0022-0x0023] [ 0.613743] pnp 00:05: [io 0x0b00-0x0b0f] [ 0.613745] pnp 00:05: [io 0x0b20-0x0b3f] [ 0.613749] pnp 00:05: [io 0x0200-0x027f] [ 0.613751] pnp 00:05: [io 0x0840-0x0847] [ 0.613833] system 00:05: [io 0x0400-0x04cf] has been reserved [ 0.613836] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.613839] system 00:05: [io 0x04d6] has been reserved [ 0.613842] system 00:05: [io 0x0680-0x06ff] has been reserved [ 0.613845] system 00:05: [io 0x077a] has been reserved [ 0.613847] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.613850] system 00:05: [io 0x0c14] has been reserved [ 0.613853] system 00:05: [io 0x0c50-0x0c52] has been reserved [ 0.613856] system 00:05: [io 0x0c6c] has been reserved [ 0.613859] system 00:05: [io 0x0c6f] has been reserved [ 0.613862] system 00:05: [io 0x0cd0-0x0cdb] has been reserved [ 0.613865] system 00:05: [io 0x0220-0x0227] has been reserved [ 0.613868] system 00:05: [io 0x0260-0x0273] has been reserved [ 0.613871] system 00:05: [io 0x0800] has been reserved [ 0.613874] system 00:05: [io 0x0804] has been reserved [ 0.613877] system 00:05: [io 0x087f] has been reserved [ 0.613880] system 00:05: [io 0x0cdc-0x0cdf] has been reserved [ 0.613883] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.613886] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.613889] system 00:05: [io 0x0200-0x027f] could not be reserved [ 0.613892] system 00:05: [io 0x0840-0x0847] has been reserved [ 0.613896] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.613937] pnp 00:06: [mem 0x00000000-0x0009ffff] [ 0.613940] pnp 00:06: [mem 0x00100000-0xafffffff] [ 0.613942] pnp 00:06: [mem 0xffe00000-0xffffffff] [ 0.613998] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.614057] system 00:06: [mem 0x00100000-0xafffffff] could not be reserved [ 0.614061] system 00:06: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.614064] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.614100] pnp 00:07: [io 0x0070-0x0071] [ 0.614106] pnp 00:07: [irq 8] [ 0.614139] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.614256] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.614290] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.614321] pnp 00:09: [io 0x0060] [ 0.614323] pnp 00:09: [io 0x0064] [ 0.614375] pnp 00:09: [irq 1] [ 0.614408] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.614472] pnp 00:0a: [irq 12] [ 0.614508] pnp 00:0a: Plug and Play ACPI device, IDs SYN0189 SYN0100 SYN0002 PNP0f13 (active) [ 0.614614] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.614622] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 0.614677] pnp 00:0b: [irq 23] [ 0.614716] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.614961] pnp: PnP ACPI: found 12 devices [ 0.614963] ACPI: ACPI bus type pnp unregistered [ 0.633053] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.633059] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.633066] PCI: max bus depth: 1 pci_try_num: 2 [ 0.633156] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8020000-0xd803ffff pref] [ 0.633160] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 0.633164] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] [ 0.633169] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff] [ 0.633173] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.633179] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.633182] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff] [ 0.633186] pci 0000:00:04.0: bridge window [mem 0xd7000000-0xd7ffffff] [ 0.633190] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.633198] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1000000-0xd100ffff pref] [ 0.633200] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 0.633204] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff] [ 0.633208] pci 0000:00:05.0: bridge window [mem 0xd6000000-0xd6ffffff] [ 0.633212] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.633218] pci 0000:00:07.0: PCI bridge to [bus 04-06] [ 0.633221] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff] [ 0.633225] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd5ffffff] [ 0.633229] pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref] [ 0.633235] pci 0000:00:14.4: PCI bridge to [bus 07-07] [ 0.633296] pci 0000:00:15.0: PCI bridge to [bus 08-08] [ 0.633299] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff] [ 0.633305] pci 0000:00:15.0: bridge window [mem 0xd4000000-0xd4ffffff] [ 0.633310] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.633335] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.633341] pci 0000:00:03.0: setting latency timer to 64 [ 0.633351] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.633355] pci 0000:00:04.0: setting latency timer to 64 [ 0.633365] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.633369] pci 0000:00:05.0: setting latency timer to 64 [ 0.633376] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.633380] pci 0000:00:07.0: setting latency timer to 64 [ 0.633392] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.633397] pci 0000:00:15.0: setting latency timer to 64 [ 0.633401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.633404] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.633407] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.633410] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.633412] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.633415] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.633418] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.633421] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.633424] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff] [ 0.633426] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.633429] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.633432] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.633435] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff] [ 0.633437] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff] [ 0.633440] pci_bus 0000:00: resource 18 [mem 0xb0000000-0xdfffffff] [ 0.633443] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfffdffff] [ 0.633446] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.633449] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd80fffff] [ 0.633452] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.633455] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.633458] pci_bus 0000:02: resource 1 [mem 0xd7000000-0xd7ffffff] [ 0.633461] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.633464] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.633466] pci_bus 0000:03: resource 1 [mem 0xd6000000-0xd6ffffff] [ 0.633469] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.633472] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.633475] pci_bus 0000:04: resource 1 [mem 0xd5000000-0xd5ffffff] [ 0.633478] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref] [ 0.633481] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.633484] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.633486] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.633489] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.633492] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.633494] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.633497] pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.633500] pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.633503] pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff] [ 0.633506] pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.633508] pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.633511] pci_bus 0000:07: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.633514] pci_bus 0000:07: resource 16 [mem 0x000ec000-0x000effff] [ 0.633517] pci_bus 0000:07: resource 17 [mem 0x000f0000-0x000fffff] [ 0.633519] pci_bus 0000:07: resource 18 [mem 0xb0000000-0xdfffffff] [ 0.633522] pci_bus 0000:07: resource 19 [mem 0xf0000000-0xfffdffff] [ 0.633525] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] [ 0.633528] pci_bus 0000:08: resource 1 [mem 0xd4000000-0xd4ffffff] [ 0.633531] pci_bus 0000:08: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.633572] NET: Registered protocol family 2 [ 0.633738] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.635173] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.638132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.638538] TCP: Hash tables configured (established 524288 bind 65536) [ 0.638541] TCP reno registered [ 0.638556] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.638599] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.638714] NET: Registered protocol family 1 [ 0.638735] pci 0000:00:01.0: Boot video device [ 0.648893] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.648989] Unpacking initramfs... [ 1.043243] Freeing initrd memory: 15448k freed [ 1.048859] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.048865] Placing 64MB software IO TLB between ffff88008b08b000 - ffff88008f08b000 [ 1.048868] software IO TLB at phys 0x8b08b000 - 0x8f08b000 [ 1.049721] audit: initializing netlink socket (disabled) [ 1.049735] type=2000 audit(1324943292.048:1): initialized [ 1.058630] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.078158] VFS: Disk quotas dquot_6.5.2 [ 1.078238] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.078335] msgmni has been set to 6848 [ 1.079213] alg: No test for stdrng (krng) [ 1.079334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.079496] io scheduler noop registered [ 1.079501] io scheduler deadline registered [ 1.079576] io scheduler cfq registered (default) [ 1.080101] ERST: Table is not found! [ 1.080103] GHES: HEST is not enabled! [ 1.080349] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.122990] Linux agpgart interface v0.103 [ 1.123129] Fixed MDIO Bus: probed [ 1.123179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.125568] i8042: Detected active multiplexing controller, rev 1.1 [ 1.126824] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.126857] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.126877] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.126897] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.126918] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.127167] mousedev: PS/2 mouse device common for all mice [ 1.127288] rtc_cmos 00:07: RTC can wake from S4 [ 1.127502] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.127580] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.127596] cpuidle: using governor ladder [ 1.127599] cpuidle: using governor menu [ 1.127958] EFI Variables Facility v0.08 2004-May-17 [ 1.128272] TCP cubic registered [ 1.128392] NET: Registered protocol family 10 [ 1.128935] Registering the dns_resolver key type [ 1.148428] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.161035] registered taskstats version 1 [ 1.169584] IMA: No TPM chip found, activating TPM-bypass! [ 1.170277] rtc_cmos 00:07: setting system clock to 2011-12-26 23:48:13 UTC (1324943293) [ 1.170550] Freeing unused kernel memory: 640k freed [ 1.279111] udevd[57]: starting version 175 [ 1.299870] [drm] Initialized drm 1.1.0 20060810 [ 1.340123] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.340132] ACPI: Sleep Button [SLPB] [ 1.340193] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.340252] ACPI: Lid Switch [LID] [ 1.340309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.340313] ACPI: Power Button [PWRF] [ 1.371376] [drm] radeon kernel modesetting enabled. [ 1.371397] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 1.371451] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.371457] radeon 0000:00:01.0: setting latency timer to 64 [ 1.373680] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.373703] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.373746] r8169 0000:02:00.0: setting latency timer to 64 [ 1.373799] r8169 0000:02:00.0: irq 40 for MSI/MSI-X [ 1.376097] [drm] initializing kernel modesetting (SUMO 0x1002:0x9648 0x103C:0x168C). [ 1.376160] [drm] register mmio base: 0xD8100000 [ 1.376162] [drm] register mmio size: 262144 [ 1.392463] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc9000063e000, 10:1f:74:ec:a3:59, XID 0c200000 IRQ 40 [ 1.393833] usbcore: registered new interface driver usbfs [ 1.393859] usbcore: registered new interface driver hub [ 1.395885] sdhci: Secure Digital Host Controller Interface driver [ 1.395889] sdhci: Copyright(c) Pierre Ossman [ 1.396130] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30) [ 1.396153] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.396251] sdhci-pci 0000:03:00.0: setting latency timer to 64 [ 1.396300] Registered led device: mmc0:: [ 1.396341] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA [ 1.396351] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30) [ 1.400060] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.400073] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface. [ 1.400080] sdhci-pci 0000:03:00.2: PCI INT A disabled [ 1.402519] acpi device:01: registered as cooling_device0 [ 1.403230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.403237] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.404090] acpi device:0b: registered as cooling_device1 [ 1.404734] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5 [ 1.404739] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 1.412098] SCSI subsystem initialized [ 1.420110] usbcore: registered new device driver usb [ 1.422587] ATOM BIOS: HP [ 1.422623] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 1.422627] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 1.423364] [drm] Detected VRAM RAM=512M, BAR=256M [ 1.423368] [drm] RAM width 32bits DDR [ 1.425770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.429622] [TTM] Zone kernel: Available graphics memory: 1753482 kiB. [ 1.429626] [TTM] Initializing pool allocator. [ 1.429659] [drm] radeon: 512M of VRAM memory ready [ 1.429661] [drm] radeon: 512M of GTT memory ready. [ 1.429678] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.429681] [drm] Driver supports precise vblank timestamp query. [ 1.429721] radeon 0000:00:01.0: irq 41 for MSI/MSI-X [ 1.429768] radeon 0000:00:01.0: radeon: using MSI. [ 1.429803] [drm] radeon: irq initialized. [ 1.429810] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.434122] [drm] Loading SUMO Microcode [ 1.434381] libata version 3.00 loaded. [ 1.439463] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.439467] ACPI: Thermal Zone [CPUZ] (41 C) [ 1.458458] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.458462] ACPI: Thermal Zone [GFXZ] (40 C) [ 1.470445] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.470450] ACPI: Thermal Zone [EXTZ] (27 C) [ 1.475182] radeon 0000:00:01.0: WB enabled [ 1.480532] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.480536] ACPI: Thermal Zone [LOCZ] (32 C) [ 1.490611] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.490615] ACPI: Thermal Zone [BATZ] (21 C) [ 1.491586] [drm] ring test succeeded in 1 usecs [ 1.491710] [drm] radeon: ib pool ready. [ 1.491794] [drm] ib test succeeded in 0 usecs [ 1.493911] [drm] Radeon Display Connectors [ 1.493914] [drm] Connector 0: [ 1.493916] [drm] VGA [ 1.493917] [drm] HPD2 [ 1.493920] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 1.493922] [drm] Encoders: [ 1.493924] [drm] CRT1: INTERNAL_UNIPHY2 [ 1.493925] [drm] CRT1: NUTMEG [ 1.493927] [drm] Connector 1: [ 1.493929] [drm] LVDS [ 1.493930] [drm] HPD1 [ 1.493932] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 1.493934] [drm] Encoders: [ 1.493936] [drm] LCD1: INTERNAL_UNIPHY2 [ 1.493938] [drm] LCD1: TRAVIS [ 1.493939] [drm] Connector 2: [ 1.493941] [drm] HDMI-A [ 1.493942] [drm] HPD4 [ 1.493945] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 1.493947] [drm] Encoders: [ 1.493948] [drm] DFP1: INTERNAL_UNIPHY [ 1.614082] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 1.734086] [drm] Radeon display connector LVDS-1: No monitor connected or invalid EDID [ 1.843732] [drm] Radeon display connector HDMI-A-1: Found valid EDID [ 1.871159] [drm] Internal thermal controller without fan control [ 1.871194] [drm] radeon: power management initialized [ 2.052064] Refined TSC clocksource calibration: 1896.551 MHz. [ 2.052071] Switching to clocksource tsc [ 2.086809] [drm] fb mappable at 0xB0141000 [ 2.086811] [drm] vram apper at 0xB0000000 [ 2.086813] [drm] size 4325376 [ 2.086814] [drm] fb depth is 24 [ 2.086816] [drm] pitch is 5632 [ 2.086991] fbcon: radeondrmfb (fb0) is primary device [ 2.218823] Console: switching to colour frame buffer device 170x48 [ 2.224236] fb0: radeondrmfb frame buffer device [ 2.224238] drm: registered panic notifier [ 2.224245] [drm] Initialized radeon 2.11.0 20080528 for 0000:00:01.0 on minor 0 [ 2.224376] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 2.224384] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.224396] radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.224404] radeon 0000:01:00.0: setting latency timer to 64 [ 2.224472] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 2.224478] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.224513] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.224602] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.224637] QUIRK: Enable AMD PLL fix [ 2.224649] ehci_hcd 0000:00:12.2: debug port 1 [ 2.224670] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd814f000 [ 2.224757] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x168C). [ 2.224809] [drm] register mmio base: 0xD8000000 [ 2.224811] [drm] register mmio size: 131072 [ 2.224814] vga_switcheroo: enabled [ 2.224980] radeon atpx: version is 1 [ 2.230256] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.230290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.230293] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.230296] usb usb1: Product: EHCI Host Controller [ 2.230298] usb usb1: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 ehci_hcd [ 2.230301] usb usb1: SerialNumber: 0000:00:12.2 [ 2.230546] hub 1-0:1.0: USB hub found [ 2.230552] hub 1-0:1.0: 5 ports detected [ 2.230740] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.230774] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 2.230779] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.230787] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.230797] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.230821] ehci_hcd 0000:00:13.2: debug port 1 [ 2.230844] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd814d000 [ 2.236260] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.236294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.236298] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.236301] usb usb2: Product: EHCI Host Controller [ 2.236303] usb usb2: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 ehci_hcd [ 2.236305] usb usb2: SerialNumber: 0000:00:13.2 [ 2.236551] hub 2-0:1.0: USB hub found [ 2.236558] hub 2-0:1.0: 5 ports detected [ 2.236780] xhci_hcd 0000:00:10.0: enabling device (0000 -> 0002) [ 2.236791] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.236884] xhci_hcd 0000:00:10.0: setting latency timer to 64 [ 2.236888] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.236906] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 2.237121] xhci_hcd 0000:00:10.0: irq 18, io mem 0xd8148000 [ 2.237193] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X [ 2.237201] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X [ 2.237208] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X [ 2.237285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.237288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.237291] usb usb3: Product: xHCI Host Controller [ 2.237293] usb usb3: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 xhci_hcd [ 2.237296] usb usb3: SerialNumber: 0000:00:10.0 [ 2.237361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.237400] xHCI xhci_add_endpoint called for root hub [ 2.237403] xHCI xhci_check_bandwidth called for root hub [ 2.237431] hub 3-0:1.0: USB hub found [ 2.237485] hub 3-0:1.0: 2 ports detected [ 2.237558] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.237566] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4 [ 2.240514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.240518] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.240520] usb usb4: Product: xHCI Host Controller [ 2.240523] usb usb4: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 xhci_hcd [ 2.240525] usb usb4: SerialNumber: 0000:00:10.0 [ 2.240716] xHCI xhci_add_endpoint called for root hub [ 2.240719] xHCI xhci_check_bandwidth called for root hub [ 2.240756] hub 4-0:1.0: USB hub found [ 2.240810] hub 4-0:1.0: 2 ports detected [ 2.240927] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.240962] xhci_hcd 0000:00:10.1: setting latency timer to 64 [ 2.240966] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 2.240975] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5 [ 2.241203] xhci_hcd 0000:00:10.1: irq 17, io mem 0xd814a000 [ 2.241268] xhci_hcd 0000:00:10.1: irq 45 for MSI/MSI-X [ 2.241274] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X [ 2.241282] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X [ 2.241352] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.241355] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.241358] usb usb5: Product: xHCI Host Controller [ 2.241360] usb usb5: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 xhci_hcd [ 2.241363] usb usb5: SerialNumber: 0000:00:10.1 [ 2.241555] xHCI xhci_add_endpoint called for root hub [ 2.241558] xHCI xhci_check_bandwidth called for root hub [ 2.241595] hub 5-0:1.0: USB hub found [ 2.241649] hub 5-0:1.0: 2 ports detected [ 2.241718] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 2.241726] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6 [ 2.244612] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.244615] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.244618] usb usb6: Product: xHCI Host Controller [ 2.244621] usb usb6: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 xhci_hcd [ 2.244623] usb usb6: SerialNumber: 0000:00:10.1 [ 2.244820] xHCI xhci_add_endpoint called for root hub [ 2.244823] xHCI xhci_check_bandwidth called for root hub [ 2.244860] hub 6-0:1.0: USB hub found [ 2.244914] hub 6-0:1.0: 2 ports detected [ 2.245024] ahci 0000:00:11.0: version 3.0 [ 2.245101] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.245265] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.245269] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.245916] scsi0 : ahci [ 2.246387] scsi1 : ahci [ 2.529759] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 2.529772] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 2.583256] usb 1-5: new high speed USB device number 3 using ehci_hcd [ 2.748217] usb 1-5: New USB device found, idVendor=04f2, idProduct=b230 [ 2.748228] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.748234] usb 1-5: Product: HP HD Webcam [Fixed] [ 2.748239] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd. [ 2.748241] usb 1-5: SerialNumber: SN0001 [ 2.962763] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 2.962776] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 2.962913] ata1: SATA max UDMA/133 abar m2048@0xd8151000 port 0xd8151100 irq 20 [ 2.962919] ata2: SATA max UDMA/133 abar m2048@0xd8151000 port 0xd8151180 irq 20 [ 2.963345] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.963429] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 2.963434] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.963448] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7 [ 2.963477] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd8150000 [ 3.018277] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.018282] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.018285] usb usb7: Product: OHCI Host Controller [ 3.018287] usb usb7: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 ohci_hcd [ 3.018290] usb usb7: SerialNumber: 0000:00:12.0 [ 3.018524] hub 7-0:1.0: USB hub found [ 3.018580] hub 7-0:1.0: 5 ports detected [ 3.018676] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.018713] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 3.018717] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.018728] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8 [ 3.018749] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd814e000 [ 3.073261] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.073266] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.073269] usb usb8: Product: OHCI Host Controller [ 3.073271] usb usb8: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 ohci_hcd [ 3.073274] usb usb8: SerialNumber: 0000:00:13.0 [ 3.073540] hub 8-0:1.0: USB hub found [ 3.073595] hub 8-0:1.0: 5 ports detected [ 3.073691] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.073727] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 3.073732] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 3.073741] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9 [ 3.073762] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd814c000 [ 3.128182] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.128187] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.128190] usb usb9: Product: OHCI Host Controller [ 3.128192] usb usb9: Manufacturer: Linux 3.1-6.slh.1-aptosid-amd64 ohci_hcd [ 3.128194] usb usb9: SerialNumber: 0000:00:14.5 [ 3.128433] hub 9-0:1.0: USB hub found [ 3.128488] hub 9-0:1.0: 2 ports detected [ 3.341218] usb 7-1: new low speed USB device number 2 using ohci_hcd [ 3.423249] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.424211] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.426639] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100 [ 3.428249] ata2.00: configured for UDMA/100 [ 3.433210] ata1.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133 [ 3.433220] ata1.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.443209] ata1.00: configured for UDMA/133 [ 3.443534] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5 [ 3.449149] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5 [ 3.453707] sd 0:0:0:0: [sda] 224674128 512-byte logical blocks: (115 GB/107 GiB) [ 3.453768] sd 0:0:0:0: [sda] Write Protect is off [ 3.453772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.453792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.454885] sda: sda1 sda2 sda3 [ 3.455737] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.464973] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.464978] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.465330] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.490336] usb 7-1: New USB device found, idVendor=15d9, idProduct=0a4c [ 3.490341] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.490344] usb 7-1: Product: USB OPTICAL MOUSE [ 3.506671] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/input/input6 [ 3.506810] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0 [ 3.506998] usbcore: registered new interface driver usbhid [ 3.507010] usbhid: USB HID core driver [ 3.615220] usb 8-5: new full speed USB device number 2 using ohci_hcd [ 3.758364] usb 8-5: New USB device found, idVendor=03f0, idProduct=311d [ 3.758374] usb 8-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.410415] ATOM BIOS: HP [ 5.410789] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 5.410792] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 5.411099] [drm] Detected VRAM RAM=1024M, BAR=256M [ 5.411103] [drm] RAM width 64bits DDR [ 5.411126] [drm] radeon: 1024M of VRAM memory ready [ 5.411129] [drm] radeon: 512M of GTT memory ready. [ 5.411134] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.411136] [drm] Driver supports precise vblank timestamp query. [ 5.411193] radeon 0000:01:00.0: irq 48 for MSI/MSI-X [ 5.411201] radeon 0000:01:00.0: radeon: using MSI. [ 5.411269] [drm] radeon: irq initialized. [ 5.411278] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 5.412324] [drm] Loading CAICOS Microcode [ 5.432755] radeon 0000:01:00.0: WB enabled [ 5.449241] [drm] ring test succeeded in 2 usecs [ 5.449362] [drm] radeon: ib pool ready. [ 5.449434] [drm] ib test succeeded in 0 usecs [ 5.449709] [drm] Radeon Display Connectors [ 5.449727] [drm] Internal thermal controller with fan control [ 5.451109] [drm] radeon: power management initialized [ 5.451287] No connectors reported connected with modes [ 5.451291] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.453955] [drm] fb mappable at 0xC0141000 [ 5.453957] [drm] vram apper at 0xC0000000 [ 5.453959] [drm] size 3145728 [ 5.453961] [drm] fb depth is 24 [ 5.453963] [drm] pitch is 4096 [ 5.454123] fb1: radeondrmfb frame buffer device [ 5.454129] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 1 [ 6.281813] PM: Starting manual resume from disk [ 6.294856] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.550494] udevd[325]: starting version 175 [ 6.618799] ACPI: acpi_idle registered with cpuidle [ 6.655219] ACPI: AC Adapter [AC] (off-line) [ 6.697930] ACPI: Battery Slot [BAT0] (battery present) [ 6.698975] wmi: Mapper loaded [ 6.700828] hp_accel: laptop model unknown, using default axes configuration [ 6.701473] lis3lv02d: 8 bits 3DC sensor found [ 6.738268] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 6.738434] Registered led device: hp::hddprotect [ 6.738452] hp_accel: driver loaded [ 6.751470] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.752429] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.752438] jmb38x_ms 0000:03:00.3: setting latency timer to 64 [ 6.756419] ACPI Error: [\_SB_.PCI0.SATA.ODDZ.ZPOD] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 6.756428] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SATA.PRT1._STA] (Node ffff88014865f370), AE_NOT_FOUND (20110623/psparse-536) [ 6.767702] cfg80211: Calling CRDA to update world regulatory domain [ 6.784351] Linux media interface: v0.10 [ 6.784412] Bluetooth: Core ver 2.16 [ 6.784441] NET: Registered protocol family 31 [ 6.784444] Bluetooth: HCI device and connection manager initialized [ 6.784448] Bluetooth: HCI socket layer initialized [ 6.784450] Bluetooth: L2CAP socket layer initialized [ 6.784456] Bluetooth: SCO socket layer initialized [ 6.785173] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 6.785217] usbcore: registered new interface driver btusb [ 6.786569] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 6.794445] Linux video capture interface: v2.00 [ 6.815172] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 6.821757] ath9k 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.821770] ath9k 0000:04:00.0: setting latency timer to 64 [ 6.899198] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 6.934699] cfg80211: World regulatory domain updated: [ 6.934704] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.934707] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.934711] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.934714] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.934717] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.934720] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.949827] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.949922] snd_hda_intel 0000:00:01.1: irq 49 for MSI/MSI-X [ 6.949947] snd_hda_intel 0000:00:01.1: setting latency timer to 64 [ 6.955847] ath: EEPROM regdomain: 0x60 [ 6.955851] ath: EEPROM indicates we should expect a direct regpair map [ 6.955855] ath: Country alpha2 being used: 00 [ 6.955857] ath: Regpair used: 0x60 [ 6.972609] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 6.974437] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 6.980037] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [ 6.980047] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 [ 6.980057] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.006432] input: HD-Audio Generic Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 7.006549] input: HD-Audio Generic HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 7.048401] hp_wmi: Unknown event_id - 0 - 0x0 [ 7.077409] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input12 [ 7.077595] usbcore: registered new interface driver uvcvideo [ 7.077597] USB Video Class driver (1.1.1) [ 7.191626] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.192224] Registered led device: ath9k-phy0 [ 7.192234] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900120e0000, irq=19 [ 7.607405] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400 [ 7.653192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 11.914286] Bluetooth: Can't change to loading configuration err [ 11.914331] ath3k: probe of 8-5:1.0 failed with error -110 [ 11.914376] usbcore: registered new interface driver ath3k [ 11.948181] kvm: Nested Virtualization enabled [ 11.948188] kvm: Nested Paging enabled [ 13.941799] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k SS [ 13.947505] EXT4-fs (sda1): re-mounted. Opts: (null) [ 13.994129] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,barrier=0 [ 14.009330] device-mapper: uevent: version 1.0.3 [ 14.009696] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 14.424273] fuse init (API version 7.17) [ 14.932263] lp: driver loaded but no devices found [ 14.942911] ppdev: user-space parallel port driver [ 15.121236] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.121240] Bluetooth: BNEP filters: protocol multicast [ 15.147129] Bluetooth: RFCOMM TTY layer initialized [ 15.147137] Bluetooth: RFCOMM socket layer initialized [ 15.147139] Bluetooth: RFCOMM ver 1.11 [ 15.238458] r8169 0000:02:00.0: eth0: link down [ 15.239895] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.249744] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 15.249751] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 15.262095] NET: Registered protocol family 17 [ 15.843632] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 17.416367] postgres (1893): /proc/1893/oom_adj is deprecated, please use /proc/1893/oom_score_adj instead. [ 17.589943] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,barrier=0,commit=600 [ 29.797547] pcmanfm[2781]: segfault at 2c ip 00007f6b26d1a226 sp 00007fffadaddb80 error 6 in libglib-2.0.so.0.3000.2[7f6b26cd3000+f6000] [ 59.142006] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 59.142014] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E3E6 (len 2585, WS 4, PS 4) @ 0xEAD0 [ 59.167099] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery reached max voltage [ 59.167102] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed [ 88.260007] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 88.260014] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E3E6 (len 2585, WS 4, PS 4) @ 0xEAD0 [ 88.285094] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery reached max voltage [ 88.285097] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed [ 145.826006] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 145.826013] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E3E6 (len 2585, WS 4, PS 4) @ 0xEAD0 [ 145.851107] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery reached max voltage [ 145.851109] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed