Linux version 3.8.3-amd64 (stephan@blaulicht) (gcc version 4.7.2 (Debian 4.7.2-5) ) #19 SMP PREEMPT Thu Mar 14 21:50:01 CET 2013
Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3-amd64 root=/dev/md1 ro
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7d7ffff] usable
BIOS-e820: [mem 0x00000000c7d80000-0x00000000c7d8dfff] ACPI data
BIOS-e820: [mem 0x00000000c7d8e000-0x00000000c7dcffff] ACPI NVS
BIOS-e820: [mem 0x00000000c7dd0000-0x00000000c7dfffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P5G43T-M PRO, BIOS 0211    09/01/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 120000000 mask FF0000000 write-back
  3 base 0D0000000 mask FF0000000 uncachable
  4 base 0E0000000 mask FE0000000 uncachable
  5 base 0C7E00000 mask FFFE00000 uncachable
  6 base 0C8000000 mask FF8000000 uncachable
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc7e00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7d80 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xc7d7ffff]
 [mem 0x00000000-0xc7bfffff] page 2M
 [mem 0xc7c00000-0xc7d7ffff] page 4k
kernel direct mapping tables up to 0xc7d7ffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
 [mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xc7d7e000-0xc7d7ffff]
ACPI: RSDP 00000000000fb970 00024 (v02 ACPIAM)
ACPI: XSDT 00000000c7d80100 00064 (v01 A_M_I_ OEMXSDT  09000901 MSFT 00000097)
ACPI: FACP 00000000c7d80290 000F4 (v03 A_M_I_ OEMFACP  09000901 MSFT 00000097)
ACPI: DSDT 00000000c7d80440 08E12 (v01  A1435 A1435001 00000001 INTL 20060113)
ACPI: FACS 00000000c7d8e000 00040
ACPI: APIC 00000000c7d80390 0006C (v01 A_M_I_ OEMAPIC  09000901 MSFT 00000097)
ACPI: MCFG 00000000c7d80400 0003C (v01 A_M_I_ OEMMCFG  09000901 MSFT 00000097)
ACPI: OEMB 00000000c7d8e040 00081 (v01 A_M_I_ AMI_OEM  09000901 MSFT 00000097)
ACPI: HPET 00000000c7d89260 00038 (v01 A_M_I_ OEMHPET  09000901 MSFT 00000097)
ACPI: GSCI 00000000c7d8e0d0 02024 (v01 A_M_I_ GMCHSCI  09000901 MSFT 00000097)
ACPI: OSFR 00000000c7d892a0 000B0 (v01 A_M_I_ OEMOSFR  09000901 MSFT 00000097)
ACPI: SSDT 00000000c7d90500 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b800000-ffff88012effffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009dfff]
  node   0: [mem 0x00100000-0xc7d7ffff]
  node   0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1015054
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3920 pages, LIFO batch:0
  DMA32 zone: 11136 pages used for memmap
  DMA32 zone: 803328 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0xc7e00000-0xfedfffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88012fc00000 s73408 r8192 d20800 u1048576
pcpu-alloc: s73408 r8192 d20800 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1001168
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3-amd64 root=/dev/md1 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3920712k/4980736k available (6071k kernel code, 920520k absent, 139504k reserved, 2523k data, 544k init)
Preemptible hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2333.091 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.18 BogoMIPS (lpj=2333091)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (fam: 06, model: 0f, stepping: 0b)
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
APIC delta adjusted to PM-Timer: 2083328 (2499960)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
smpboot: Booting Node   0, Processors  #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9332.36 BogoMIPS)
devtmpfs: initialized
xor: automatically using best checksumming function:
   generic_sse:  8596.000 MB/sec
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
raid6: sse2x1    4179 MB/s
raid6: sse2x2    4750 MB/s
raid6: sse2x4    6964 MB/s
raid6: using algorithm sse2x4 (6964 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000c7d90100 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: SSDT 00000000c7d90300 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc7e00000-0xffffffff]
pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xbc00-0xbc07]
pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000
pci 0000:00:02.1: reg 10: [mem 0xfe900000-0xfe9fffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io  0xb480-0xb49f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io  0xb800-0xb81f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io  0xb880-0xb89f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xfe8fb000-0xfe8fb3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io  0xb000-0xb01f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io  0xb080-0xb09f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io  0xb400-0xb41f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfe8fa000-0xfe8fa3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xa880-0xa887]
pci 0000:00:1f.2: reg 14: [io  0xa800-0xa803]
pci 0000:00:1f.2: reg 18: [io  0xa480-0xa487]
pci 0000:00:1f.2: reg 1c: [io  0xa400-0xa403]
pci 0000:00:1f.2: reg 20: [io  0xa080-0xa09f]
pci 0000:00:1f.2: reg 24: [mem 0xfe8f8000-0xfe8f87ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfe8f9000-0xfe8f90ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
pci 0000:02:00.0: reg 10: [io  0xdc00-0xdc07]
pci 0000:02:00.0: reg 14: [io  0xd880-0xd883]
pci 0000:02:00.0: reg 18: [io  0xd800-0xd807]
pci 0000:02:00.0: reg 1c: [io  0xd480-0xd483]
pci 0000:02:00.0: reg 20: [io  0xd400-0xd40f]
pci 0000:02:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:01:00.0: [1969:1026] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
pci 0000:01:00.0: reg 18: [io  0xcc00-0xcc7f]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:04:01.0: [10ec:8029] type 00 class 0x020000
pci 0000:04:01.0: reg 10: [io  0xec00-0xec1f]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc7e00000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7d80000-0xc7ffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io  0x0290-0x0297] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xc7dfffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc7e00000-0xc81fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xc8400000-0xc85fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc7e00000-0xc81fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.4:   bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.5:   bridge window [mem 0xc8400000-0xc85fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc7e00000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xc7e00000-0xc81fffff]
pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc8400000-0xc85fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xc7e00000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc3d7e000-0xc7d7e000] (64MB) mapped at [ffff8800c3d7e000-ffff8800c7d7dfff]
HugeTLB registered 2 MB page size, pre-allocated 0 pages
DLM installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 7657
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 131072K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
loop: module loaded
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8200 irq 44
ata4: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8280 irq 44
ata5: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8300 irq 44
ata6: SATA max UDMA/133 abar m2048@0xfe8f8000 port 0xfe8f8380 irq 44
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_subset
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe8fb000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe8fa000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b880
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver aiptek
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
sctp: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:02: setting system clock to 2013-03-15 14:59:37 UTC (1363359577)
ALSA device list:
  #0: HDA Intel at 0xfe8f4000 irq 45
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: ATAPI: ASUS    DRW-22B3L, 1.00, max UDMA/66
ata7.01: configured for UDMA/66
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-5: new high-speed USB device number 3 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 6-1: new low-speed USB device number 2 using uhci_hcd
tsc: Refined TSC clocksource calibration: 2333.332 MHz
Switching to clocksource tsc
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input11
hid-generic 0003:04F3:0210.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1 sde2 sde3
sd 4:0:0:0: [sde] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:1:0: CD-ROM            ASUS     DRW-22B3L        1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:1:0: Attached scsi CD-ROM sr0
 sdf: sdf1 sdf2 sdf3
sd 5:0:0:0: [sdf] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdd2 ...
md:  adding sdd2 ...
md: sdc2 has different UUID to sdd2
md:  adding sdb2 ...
md: sda2 has different UUID to sdd2
md: created md1
md: bind<sdb2>
md: bind<sdd2>
md: running: <sdd2><sdb2>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 4301717504
md: considering sdc2 ...
md:  adding sdc2 ...
md:  adding sda2 ...
md: created md11
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2>
md/raid1:md11: active with 2 out of 2 mirrors
md11: detected capacity change from 0 to 4301717504
md: ... autorun DONE.
 md1: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:1.
devtmpfs: mounted
Freeing unused kernel memory: 544k freed
udevd[1016]: starting version 175
 md11: unknown partition table
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
eth1: RealTek RTL-8029 found at 0xec00, IRQ 17, 00:50:fc:a9:2f:53.
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
usb 2-5: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
IR keymap rc-dib0700-rc5 not found
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/rc/rc0/input12
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/rc/rc0
dvb-usb: could not initialize remote control.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
Adding 4200960k swap on /dev/sdf2.  Priority:1 extents:1 across:4200960k 
Adding 4200960k swap on /dev/sde2.  Priority:1 extents:1 across:4200960k 
EXT3-fs (md1): using internal journal
md: md0 stopped.
md: bind<sdb1>
md: bind<sdf1>
md: bind<sde1>
md: bind<sdc1>
md: bind<sdd1>
md: bind<sda1>
md/raid:md0: device sda1 operational as raid disk 0
md/raid:md0: device sdd1 operational as raid disk 5
md/raid:md0: device sdc1 operational as raid disk 4
md/raid:md0: device sde1 operational as raid disk 3
md/raid:md0: device sdf1 operational as raid disk 2
md/raid:md0: device sdb1 operational as raid disk 1
md/raid:md0: allocated 6402kB
md/raid:md0: raid level 5 active with 6 out of 6 devices, algorithm 2
RAID conf printout:
 --- level:5 rd:6 wd:6
 disk 0, o:1, dev:sda1
 disk 1, o:1, dev:sdb1
 disk 2, o:1, dev:sdf1
 disk 3, o:1, dev:sde1
 disk 4, o:1, dev:sdc1
 disk 5, o:1, dev:sdd1
md0: detected capacity change from 0 to 2199973724160
 md0: unknown partition table
md: md2 stopped.
md: bind<sde3>
md: bind<sdf3>
md/raid1:md2: active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 55808450560
 md2: unknown partition table
md: md_d1 stopped.
md: bind<sdb3>
md: bind<sda3>
md/raid1:md_d1: active with 2 out of 2 mirrors
md_d1: detected capacity change from 0 to 55808450560
 md_d1: p1 p2 p3
md: md_d11 stopped.
md: bind<sdd3>
md: bind<sdc3>
md/raid1:md_d11: active with 2 out of 2 mirrors
md_d11: detected capacity change from 0 to 55808450560
 md_d11: p1 p2 p3
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md11): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d1p1): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d1p2): using internal journal
EXT3-fs (md_d1p2): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d1p3): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d11p1): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d11p2): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md_d11p3): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md2): using internal journal
EXT3-fs (md2): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with writeback data mode
ATL1E 0000:01:00.0: irq 46 for MSI/MSI-X
ATL1E 0000:01:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
