<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW --- - [AMD Fusion E-350] HDMI refresh rates doesn't match expectations" href="https://bugs.freedesktop.org/show_bug.cgi?id=76564#c23">Comment # 23</a> on <a class="bz_bug_link bz_status_NEW " title="NEW --- - [AMD Fusion E-350] HDMI refresh rates doesn't match expectations" href="https://bugs.freedesktop.org/show_bug.cgi?id=76564">bug 76564</a> from <a class="email" href="mailto:jeroenk61@hotmail.com" title="jeroen <jeroenk61@hotmail.com>"> jeroen</a> <pre>(In reply to <a href="show_bug.cgi?id=76564#c21">comment #21</a>) > (In reply to <a href="show_bug.cgi?id=76564#c20">comment #20</a>) > > > > When I look at the xrandr output I wonder if the reference frequency is not > > 75MHz for fgrlx? Can the reference even change is this not fixed by the > > hardware? > > As far as I know, it's fixed. I'm not really sure what fglrx is doing. > Anyway, it's probably easier to just fix the open source driver. > > the modes are: > 1920x1080 (0x55) 148.5MHz +HSync +VSync *current +preferred > h: width 1920 start 2448 end 2492 total 2640 skew 0 clock > 56.2KHz > v: height 1080 start 1084 end 1089 total 1125 clock > 50.0Hz > > 1920x1080 (0x5a) 74.2MHz +HSync +VSync > h: width 1920 start 2558 end 2602 total 2750 skew 0 clock > 27.0KHz > v: height 1080 start 1084 end 1089 total 1125 clock > 24.0Hz > > and the driver ends up calculating the dividers as such: > > for 148.5MHz target clock: > (100Mhz * 23.8) / (2 * 8) = 148.75Mhz > > for 74.2MHz target clock: > (100Mhz * 23.7) / (2 * 16) = 74.0625Mhz > > One would need to tweak radeon_compute_pll_avivo() in radeon_display.c to > try and get dividers that are closer to the target clock. Isn't that what the OSS driver is currently doing? If you look in the post history those are the exact values that are currently being used</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>