<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW --- - Display freezes & corruption with an r7 260x on 3.14-rc6" href="https://bugs.freedesktop.org/show_bug.cgi?id=75992#c45">Comment # 45</a> on <a class="bz_bug_link bz_status_NEW " title="NEW --- - Display freezes & corruption with an r7 260x on 3.14-rc6" href="https://bugs.freedesktop.org/show_bug.cgi?id=75992">bug 75992</a> from <a class="email" href="mailto:edt@aei.ca" title="Ed Tomlinson <edt@aei.ca>"> Ed Tomlinson</a> <pre>Good news. I rebuilt linux-git with the newer mc ucode patch and manually replaced the BONAIRE_mc.bin firmware file and rebuilt my initrd. uniengine tropical completes at 33fps (fullscreen 1920x1200) uniengine sanctuary completes at 45fps (fullscreen 1920x1200) tropical is the test that usually killed things quickly. It ran at about 30fps when it worked at all on .14 and about 40fps on .15 with old firmware. fglrx manages about 80fps. That being said the new firmware is not as fluid as the older. There are times that there are hesitations when the camera is panning which I did not notice previously. However my tests do run without stalling or corruption. Would you like me to test with and without the patch on .14? You can add my tested-by to the 'newer mc ucode patch' for linux-git 'Tested-by: Ed Tomlinson <<a href="mailto:edtoml@gmail.com">edtoml@gmail.com</a>>' THANKS!</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>