<div dir="ltr"><div><div>Hey all, </div>I also had a talk with Alex yesterday about post-processing issues when using dynamic UVD profiles and a chamge on CS ioctl </div><div>including a flag to let user mode driver tell to the kernel which performance requirement it wants for post processing. A commom </div><div>point for both discussion is to stablish the default values for these profiles, but probably this ioctl change would be more impacting/complex </div><div>to implement than a sysfs entry. </div><div>If a sysfs entry is anough for now I can handle the code to create it and, with your help, the code to setup the UVD profile requested through it. </div><div>Is there any suggestion? </div><div>Thanks all for your help, </div></div><div class="gmail_extra"> <div class="gmail_quote">On Fri, Aug 15, 2014 at 5:48 AM, Christian König <<a href="mailto:christian.koenig@amd.com" target="_blank">christian.koenig@amd.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi guys, to make a long story short every time I watch a movie my laptop start to heat up because we always select the standard UVD power profile without actually measuring if that is necessary. Marco came up with a patch that seems to reliable measure the fps send down to the kernel and so together with knowing the frame size of the video should allow us to select the right UVD power profile. The problem is that Alex (unnoticed by me) completely disabled selecting the UVD profiles because of some issues with advanced post processing discussed on IRC. The problem seems to be that the lower UVD profiles have a to low SCLK/MCLK to handle the 3D load that comes with scaling, deinterlacing etc... I unfortunately don't have time for it, cause this only affects the hardware generations R600-SI and not the newest one CIK. So could you guys stick together and come up with a solution? Something like a sysfs entry that let's us select the minimum UVD power level allowed? I think Marco is happy to come up with a patch, we just need to know what's really needed and what should be the default values. I'm happy to review everything that comes out of it, just don't have time to do it myself. Happy discussion and thanks in advance, Christian. Am 12.08.2014 um 15:05 schrieb Alex Deucher:<div class="HOEnZb"><div class="h5"> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Tue, Aug 12, 2014 at 6:00 AM, Christian König <<a href="mailto:deathsimple@vodafone.de" target="_blank">deathsimple@vodafone.de</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Am 11.08.2014 um 16:52 schrieb Alex Deucher: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Mon, Aug 11, 2014 at 5:08 AM, Christian König <<a href="mailto:deathsimple@vodafone.de" target="_blank">deathsimple@vodafone.de</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Am 07.08.2014 um 21:43 schrieb Alex Deucher: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Thu, Aug 7, 2014 at 11:32 AM, Christian König <<a href="mailto:deathsimple@vodafone.de" target="_blank">deathsimple@vodafone.de</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Am 07.08.2014 um 16:32 schrieb Alex Deucher: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Thu, Aug 7, 2014 at 7:33 AM, Christian König <<a href="mailto:deathsimple@vodafone.de" target="_blank">deathsimple@vodafone.de</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> From: Marco A Benatto <<a href="mailto:marco.antonio.780@gmail.com" target="_blank">marco.antonio.780@gmail.com</a>> Adding a Frames Per Second estimation logic on UVD handles when it has being used. This estimation is per handle basis and will help on DPM profile calculation. v2 (chk): fix timestamp type, move functions around and cleanup code a bit. </blockquote> Will this really help much? I thought the problem was mainly due to sclk and mclk for post processing. </blockquote> It should at least handle the UVD side for upclocking when you get a lot of streams / fps. And at on my NI the patch seems to do exactly that. Switching sclk and mclk for post processing is a different task, and I actually have no idea what to do with them. </blockquote> At this point we always choose the plain UVD state anyway so this patch would only take effect if we re-enabled the dynamic UVD state selection. </blockquote> Hui? I thought we already re-enabled the dynamic UVD state selection, but double checking this I found it disabled again. What was the problem with that? Looks like I somehow missed the discussion around it. </blockquote> We did, but after doing so a number of people complained about a regression on IRC because when apps like xmbc enabled post processing, performance went down. </blockquote> That's strange, from my experience the different UVD performance states only affect UVDs dclk/vclk, not sclk/mclk. I need to get the DPM dumps to confirms this. </blockquote> The sclks and mclks are usually different as well, especially on APUs. I can send you some examples. <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> You not off hand remember who complained on IRC? Finding something in the IRC logs is like searching for a needle in a haystack. </blockquote> I don't remember off hand. I think zgreg was involved in some of the discussions. Alex <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Thanks, Christian. <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Alex <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Christian. <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> For the post processing, we probably need a hint we can pass to the driver in the CS ioctl to denote what state we need. Although if we did that, this could would largely be moot. That said, newer asics support dynamic UVD clocks so we really only need something like that for older asics and I guess VCE. Alex <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Christian. <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Alex <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Signed-off-by: Marco A Benatto <<a href="mailto:marco.antonio.780@gmail.com" target="_blank">marco.antonio.780@gmail.com</a>> Signed-off-by: Christian König <<a href="mailto:christian.koenig@amd.com" target="_blank">christian.koenig@amd.com</a>> --- drivers/gpu/drm/radeon/radeon.h | 10 ++++++ drivers/gpu/drm/radeon/radeon_uvd.c | 64 +++++++++++++++++++++++++++++++++---- 2 files changed, 68 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 9e1732e..e92f6cb 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1617,6 +1617,15 @@ int radeon_pm_get_type_index(struct radeon_device *rdev, #define RADEON_UVD_STACK_SIZE (1024*1024) #define RADEON_UVD_HEAP_SIZE (1024*1024) +#define RADEON_UVD_FPS_EVENTS_MAX 8 +#define RADEON_UVD_DEFAULT_FPS 60 + +struct radeon_uvd_fps { + uint64_t timestamp; + uint8_t event_index; + uint8_t events[RADEON_UVD_FPS_EVENTS_MAX]; +}; + struct radeon_uvd { struct radeon_bo *vcpu_bo; void *cpu_addr; @@ -1626,6 +1635,7 @@ struct radeon_uvd { struct drm_file *filp[RADEON_MAX_UVD_HANDLES]; unsigned img_size[RADEON_MAX_UVD_HANDLES]; struct delayed_work idle_work; + struct radeon_uvd_fps fps_info[RADEON_MAX_UVD_HANDLES]; }; int radeon_uvd_init(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 6bf55ec..ef5667a 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -237,6 +237,51 @@ void radeon_uvd_force_into_uvd_segment(struct radeon_bo *rbo) rbo->placement.lpfn = (256 * 1024 * 1024) >> PAGE_SHIFT; } +static void radeon_uvd_fps_clear_events(struct radeon_device *rdev, int idx) +{ + struct radeon_uvd_fps *fps = &rdev->uvd.fps_info[idx]; + unsigned i; + + fps->timestamp = jiffies_64; + fps->event_index = 0; + for (i = 0; i < RADEON_UVD_FPS_EVENTS_MAX; i++) + fps->events[i] = 0; +} + +static void radeon_uvd_fps_note_event(struct radeon_device *rdev, int idx) +{ + struct radeon_uvd_fps *fps = &rdev->uvd.fps_info[idx]; + uint64_t timestamp = jiffies_64; + unsigned rate = 0; + + uint8_t index = fps->event_index++; + fps->event_index %= RADEON_UVD_FPS_EVENTS_MAX; + + rate = div64_u64(HZ, max(timestamp - fps->timestamp, 1ULL)); + + fps->timestamp = timestamp; + fps->events[index] = min(rate, 120u); +} + +static unsigned radeon_uvd_estimate_fps(struct radeon_device *rdev, int idx) +{ + struct radeon_uvd_fps *fps = &rdev->uvd.fps_info[idx]; + unsigned i, valid = 0, count = 0; + + for (i = 0; i < RADEON_UVD_FPS_EVENTS_MAX; i++) { + /* We should ignore zero values */ + if (fps->events[i] != 0) { + count += fps->events[i]; + valid++; + } + } + + if (valid > 0) + return count / valid; + else + return RADEON_UVD_DEFAULT_FPS; +} + void radeon_uvd_free_handles(struct radeon_device *rdev, struct drm_file *filp) { int i, r; @@ -419,8 +464,10 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, /* create or decode, validate the handle */ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (atomic_read(&p->rdev->uvd.handles[i]) == handle) + if (atomic_read(&p->rdev->uvd.handles[i]) == handle) { + radeon_uvd_fps_note_event(p->rdev, i); return 0; + } } /* handle not found try to alloc a new one */ @@ -428,6 +475,7 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) { p->rdev->uvd.filp[i] = p->filp; p->rdev->uvd.img_size[i] = img_size; + radeon_uvd_fps_clear_events(p->rdev, i); return 0; } } @@ -763,7 +811,7 @@ int radeon_uvd_get_destroy_msg(struct radeon_device *rdev, int ring, static void radeon_uvd_count_handles(struct radeon_device *rdev, unsigned *sd, unsigned *hd) { - unsigned i; + unsigned i, fps_rate = 0; *sd = 0; *hd = 0; @@ -772,10 +820,13 @@ static void radeon_uvd_count_handles(struct radeon_device *rdev, if (!atomic_read(&rdev->uvd.handles[i])) continue; - if (rdev->uvd.img_size[i] >= 720*576) - ++(*hd); - else - ++(*sd); + fps_rate = radeon_uvd_estimate_fps(rdev, i); + + if (rdev->uvd.img_size[i] >= 720*576) { + (*hd) += fps_rate > 30 ? 1 : 2; + } else { + (*sd) += fps_rate > 30 ? 1 : 2; + } } } @@ -805,6 +856,7 @@ void radeon_uvd_note_usage(struct radeon_device *rdev) set_clocks &= schedule_delayed_work(&rdev->uvd.idle_work, msecs_to_jiffies(UVD_IDLE_TIMEOUT_MS)); + if ((rdev->pm.pm_method == PM_METHOD_DPM) && rdev->pm.dpm_enabled) { unsigned hd = 0, sd = 0; radeon_uvd_count_handles(rdev, &sd, &hd); -- 1.9.1 </blockquote></blockquote></blockquote></blockquote></blockquote></blockquote></blockquote></blockquote> </div></div></blockquote></div> -- Marco Antonio Benatto Linux user ID: #506236 </div>