[Ftp-release] ANNOUNCE: telepathy-salut 0.2.3 released

Guillaume Desmottes guillaume.desmottes at collabora.co.uk
Thu Mar 20 06:32:19 PDT 2008 

Hi,

I've just released telepathy-salut 0.2.3. Like the previous stable
release, this one fixes some Clique and tubes issues.


Tarballs available at:
  http://telepathy.freedesktop.org/releases/telepathy-salut/

Full changes below.

        G.


Thu Mar 20 14:28:21 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * version 0.2.3

Thu Mar 20 14:23:55 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  tagged telepathy-salut 0.2.3

Thu Mar 20 14:23:37 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * version 0.2.3

Thu Mar 20 12:35:53 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastCausalTransport: When reconnecting after a reset,
reset the resetting flag

Thu Mar 20 12:34:52 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * continous-failure.py: Update test to send messages on a regular
basis to see check if data is still send after a reset

Thu Mar 20 12:30:05 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * While resetting just drop messages, don't send it through to a lower
transport

Tue Mar 18 13:54:19 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * contact-manager: use the service name and not the activity name when
removing an activity

Fri Feb 29 19:54:30 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * Fix some small coding style issues

Fri Feb 29 19:48:48 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastSender: Don't assume that all packets between
->first_packet, and ->next_output_paxket exist

Fri Feb 29 18:57:44 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastSender: Fix repairing when the node has moved to
pending_removal

Fri Feb 29 17:57:07 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastSenderGroup: WHOIS_REQUEST senders should be looked
up by whois_request.sender_id in the packet

Fri Feb 29 17:28:11 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastSenderGroup: Fixed a silly bug where the condition
in the forloop woud still true forever

Fri Feb 29 12:46:20 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticast: Don't keep pending removals in the main hash, but
put them in a seperate array. So we can start a new gathering session
including them, while still being able to react on repair requests

Thu Feb 28 17:40:05 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastTransport: Ensure we wait for nodes to finish their
failure process before completeling the JOIN

Thu Feb 28 17:39:26 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastTransport: reset the timeout to zero when the
gathering phase has stopped, not strictly necessary, but nice anyway

Thu Feb 28 16:47:31 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticastSender: Set the pending removal state before
checking the queue length as the lenght partially depends on the state

Thu Feb 28 12:16:35 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * If we're resetting because the join failed, return JOIN_FAILED
immediately

Thu Feb 28 12:16:08 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * Better debugging of sender garbage collection

Thu Feb 28 10:55:32 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * GibberRMulticast: Add more clear debugging information

Thu Feb 21 10:35:58 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * bytestream-obb: remove redundant disconnect signals

Thu Feb 21 10:15:46 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * bystream-oob: always go trought the closing state before the closed
one

Wed Feb 20 17:43:11 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * bytestream-obb: add a closing state and disconnect the transport
when closing the bytestream

Wed Feb 20 16:13:58 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * bytestream-oob: be sure the buffer is flushed before disconnect the
transport

Wed Feb 20 14:07:31 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-fd-transport: emit the buffer-empthy signal when all the data
are directly send

Wed Feb 20 14:02:22 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * add gibber_transport_emit_buffer_empty and use it instead of
g_signal_emit_by_name

Wed Feb 20 13:53:52 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-transport: assert buffer_is_empty is implemented

Wed Feb 20 13:35:22 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * tube-stream: wait the buffer is empty before remove the transport

Wed Feb 20 13:17:26 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-fd-transport: implement the buffer_is_empty method

Wed Feb 20 13:15:55 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-fd-transport: emit the "buffer-empty" signal when needed

Wed Feb 20 13:14:49 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-transport: add gibber_transport_buffer_is_empty abstract
method

Wed Feb 20 13:02:30 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-transport: add a "empty-buffer" signal

Fri Feb 15 12:21:15 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * NEWS: fix typo in 0.2.2 release notes

Thu Feb  7 14:06:30 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * SalutMucManager: If setting up a resolver fails then we can get into
a situation where a browser entry doesn't have a resolver. Handle this
gracefully

Fri Feb  1 15:24:54 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * gibber-bytestream-muc: actually close the muc before announce it as
closed

Fri Feb  1 12:38:20 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * Ignore request for removal of unknown senders

Fri Feb  1 12:26:22 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * Reschedule whois request before sending out the request sigan, to
prevent race conditions if the signal handler reenters the main loop

Fri Feb  1 12:27:14 CET 2008  Sjoerd Simons
<sjoerd.simons at collabora.co.uk>
  * Always fully stop whois recovery process if a WHOIS_REPLY was
received

Thu Jan 31 17:43:21 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * tube-dbus: fix a reference leak when creating the muc bytestream

Thu Jan 31 17:37:11 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * salut_tube_dbus_constructor: when handle_type is room, the
bytestream have to be of type GibberBytestreamMuc

Thu Jan 31 16:24:19 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * salut-self: convert error code to TP_ERROR_NETWORK_ERROR when
announce_activity() failed

Wed Jan 30 13:54:41 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * NEWS: copy release notes from 0.2.0 and 0.2.1

Wed Jan 30 13:14:38 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * NEWS: add some words about the 0.2.2 release

Wed Jan 30 12:54:25 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  * version 0.2.2

Wed Jan 30 12:45:48 CET 2008  Guillaume Desmottes
<guillaume.desmottes at collabora.co.uk>
  tagged telepathy-salut 0.2.2

More information about the Ftp-release mailing list