[gst-devel] Network streaming using udpsrc and udpsink

Wim Taymans wim.taymans at gmail.com
Tue May 13 10:54:26 CEST 2008


On Tue, 2008-05-13 at 14:12 +0530, Manish Rana wrote:
> Hi Wim, 
> 
> Thanks a lot for your prompt replies :)
> I am using same pipelines, but still i am not sure whether i am
> getting RTCP data or not that is why i used tcpdump.
> Also i want the the RTCP data in the Gstreamer application.
 
Wireshark is a lot easier to check network activity nowadays.
What are you going to do with the raw RTCP packets in the application?

Wim
> 
> Thanks n Regds
> Manish
> 
> On Tue, May 13, 2008 at 1:47 PM, Wim Taymans <wim.taymans at gmail.com>
> wrote:
>         On Tue, 2008-05-13 at 13:05 +0530, Manish Rana wrote:
>         > Hi,
>         >
>         
>         > Thanks a lot Wim.
>         > I am able to run and get the RTP data.
>         >
>         > But when i try getting RTCP data, i am not able to get it
>         even in
>         > loop-back.
>         
>         
>         For RTCP you need to use gstrtpbin. There are some example
>         pipelines
>         here to get you started:
>         
>         http://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-bad-plugins/html/gst-plugins-bad-plugins-gstrtpbin.html
>         
>         Wim
>         
>         
>         
>         > "tcpdump -T rtcp" doesn't give ant RTCP packet.
>         > Though it is printing me some UDP and TCP packets ( may be
>         rtcp but i
>         > am not too sure.)
>         > "as tcpdump -T rtp" clearly lists me the udp/rtpv1 packets.
>         >
>         > Also i need to get the RTCP data from Gstreamer, how can i
>         get it???
>         > Can i dump these RTCP packets in some filesink ???
>         >
>         > Please Help....
>         >
>         > Thanks and Regards
>         > Manish
>         >
>         >
>         >
>         > On Thu, May 8, 2008 at 7:37 PM, Wim Taymans
>         <wim.taymans at gmail.com>
>         > wrote:
>         >         On Thu, 2008-05-08 at 19:25 +0530, Manish Rana
>         wrote:
>         >         > Hi,
>         >         >
>         >         > I can run the same pipelines in loopback.
>         >         > To test it live can someone please tell me the
>         settings for
>         >         UDPSRC.
>         >
>         >
>         >         Unless you are receiving UDP from a multicast group,
>         you don't
>         >         need to
>         >         set anything for the uri in udpsrc, just the port
>         number to
>         >         listen on is
>         >         enough.
>         >
>         >         Wim
>         >
>         >         >
>         >         > Server:     gst-launch filesrc
>         location=MPEG25_11_32_m.mp3 !
>         >         > mp3parse ! udpsink host=192.168.15.174  port=5000
>         >         >
>         >         > Clinet:     gst-launch udpsrc uri= ?????
>         port=5000 !
>         >         typefind !
>         >         > ffdec_mp3 ! alsasink
>         >         >
>         >         > BR
>         >         > Manish
>         >         >
>         >         >
>         >         >
>         >         > On Fri, Mar 28, 2008 at 10:24 AM, Ramana Reddy
>         Polaka
>         >         > <Ramana_Polaka at infosys.com> wrote:
>         >         >         Thank you. The following works fine
>         >         >
>         >         >
>         >         >
>         >         >         Server:     gst-launch filesrc
>         >         location=MPEG25_11_32_m.mp3 !
>         >         >         mp3parse ! udpsink host=192.168.15.174
>          port=5000
>         >         >
>         >         >         Clinet:     gst-launch udpsrc port=5000 !
>         typefind !
>         >         >         ffdec_mp3 ! alsasink
>         >         >
>         >         >
>         >         >
>         >
>         ______________________________________________________________
>         >         >
>         From:gstreamer-devel-bounces at lists.sourceforge.net
>         >         >
>         >
>         [mailto:gstreamer-devel-bounces at lists.sourceforge.net] On
>         >         >         Behalf Of thiagoss
>         >         >         Sent: Thursday, March 27, 2008 10:04 PM
>         >         >         To: Daniel Díaz
>         >         >         Cc: gstreamer-devel at lists.sourceforge.net;
>         Ramana
>         >         Reddy Polaka
>         >         >
>         >         >
>         >         >         Subject: Re: [gst-devel] Network streaming
>         using
>         >         udpsrc and
>         >         >         udpsink
>         >         >
>         >         >
>         >         >         Try this:
>         >         >
>         >         >         > gst-launch filesrc
>         location=MPEG25_11_32_m.mp3 !
>         >         mp3parse !
>         >         >         udpsink host=192.168.15.174  port=5000
>         >         >         >
>         >         >         > gst-launch udpsrc port=5000 ! typefind !
>         >          ffdec_mp3 !
>         >         >         alsasink
>         >         >
>         >         >         Setting to sync false will make udpsink
>         push too
>         >         much data,
>         >         >         and the other process won't be able to
>         receive that
>         >         fast,
>         >         >         probably most of them may not arrive. And
>         using
>         >         mp3parse puts
>         >         >         timestamps on the buffers, that makes it
>         possible to
>         >         udpsink
>         >         >         to send buffers on the right time.
>         >         >
>         >         >         and on the receiver ffdec_mp3 requires
>         that it
>         >         receives "mp3"
>         >         >         streams, already with a type, udpsrc
>         provides "any",
>         >         so
>         >         >         typefind would help.
>         >         >
>         >         >         Hope it works.
>         >         >
>         >         >         Thiago
>         >         >
>         >         >
>         >         >         On Thu, Mar 27, 2008 at 3:01 AM, Daniel
>         Díaz
>         >         >         <mrchapp at gmail.com> wrote:
>         >         >
>         >         >         Hello, Ramana
>         >         >
>         >         >
>         >         >         On Wed, Mar 26, 2008 at 10:46 PM, Ramana
>         Reddy
>         >         Polaka
>         >         >
>         >         >
>         >         >
>         >         >         < wrote:
>         >         >
>         >         >
>         >         >         > Tried the following also. But did not
>         work.
>         >         >         >
>         >         >         > Receiver (Rx)
>         >         >         > gst-launch filesrc
>         location=MPEG25_11_32_m.mp3 !
>         >         udpsink
>         >         >         host=192.168.15.174
>         >         >         > port=5000 sync=false
>         >         >         >
>         >         >         > Transmitter (Tx)
>         >         >         > gst-launch udpsrc port=5000 !
>         ffdec_mp3 ! alsasink
>         >         >
>         >         >
>         >         >         Do you have to use UDP? You might want to
>         try with
>         >         >         tcpserversrc/tcpclientsink.
>         >         >
>         >         >         Greetings!
>         >         >
>         >         >         Daniel Díaz
>         >         >         yosoy at danieldiaz.org
>         >         >
>         >         >
>         >         >
>         >         >
>         >         >         > Regards,
>         >         >         > Ramana
>         >         >         >
>         >         >         >  ________________________________
>         >         >         >
>         >         >         >
>         >         >         > From: thiagoss
>         [mailto:thiagossantos at gmail.com]
>         >         >         >  Sent: Wednesday, March 26, 2008 8:40 PM
>         >         >         >  To: Ramana Reddy Polaka
>         >         >         >  Subject: Re: [gst-devel] Network
>         streaming using
>         >         udpsrc and
>         >         >         udpsink
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Probably removing the filesink and
>         putting "mad !
>         >         alsasink"
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > On Wed, Mar 26, 2008 at 3:09 AM, Ramana
>         Reddy
>         >         Polaka  wrote:
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Hi,
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Using the following gst-launch command,
>         I could
>         >         dump mp3
>         >         >         data. But I want to
>         >         >         > play it live. Can you please let me know
>         how to
>         >         achieve
>         >         >         that? Say my host
>         >         >         > IP: 192.168.15.174
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Receiver (Rx):
>         >         >         >
>         >         >         > gst-launch -v udpsrc ! filesink
>         location=dump.mp3
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Transmitter (Tx):
>         >         >         >
>         >         >         > gst-launch -v filesrc
>         >         location=MPEG25_11_32_m.mp3 ! udpsink
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Thanks in advance
>         >         >         >
>         >         >         >
>         >         >         >
>         >         >         > Regards,
>         >         >         >
>         >         >         > Ramana
>         >         >
>         >         >
>         >         >
>         >         >         **************** CAUTION - Disclaimer
>         >         *****************
>         >         >         This e-mail contains PRIVILEGED AND
>         CONFIDENTIAL
>         >         INFORMATION
>         >         >         intended solely for the use of the
>         addressee(s). If
>         >         you are
>         >         >         not the intended recipient, please notify
>         the sender
>         >         by e-mail
>         >         >         and delete the original message. Further,
>         you are
>         >         not to copy,
>         >         >         disclose, or distribute this e-mail or its
>         contents
>         >         to any
>         >         >         other person and any such actions are
>         unlawful. This
>         >         e-mail
>         >         >         may contain viruses. Infosys has taken
>         every
>         >         reasonable
>         >         >         precaution to minimize this risk, but is
>         not liable
>         >         for any
>         >         >         damage you may sustain as a result of any
>         virus in
>         >         this
>         >         >         e-mail. You should carry out your own
>         virus checks
>         >         before
>         >         >         opening the e-mail or attachment. Infosys
>         reserves
>         >         the right
>         >         >         to monitor and review the content of all
>         messages
>         >         sent to or
>         >         >         from this e-mail address. Messages sent to
>         or from
>         >         this e-mail
>         >         >         address may be stored on the Infosys
>         e-mail system.
>         >         >         ***INFOSYS******** End of Disclaimer
>         >         ********INFOSYS***
>         >         >
>         >         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         >         Check out the new SourceForge.net
>         Marketplace.
>         >         >         It's the best place to buy or sell
>         services for
>         >         >         just about anything Open Source.
>         >         >
>         >
>         http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>         >         >
>         _______________________________________________
>         >         >         gstreamer-devel mailing list
>         >         >         gstreamer-devel at lists.sourceforge.net
>         >         >
>         >
>         https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
>         >         >
>         >         >
>         >         >
>         >         >
>         >         > --
>         >         > Manish Rana
>         >         > Senior Software Engg.
>         >         > Handset Technology Solution,
>         >         > Sasken Comm. Tech.
>         >         > Bangalore,India
>         >
>         >         >
>         >
>         -------------------------------------------------------------------------
>         >         > This SF.net email is sponsored by the 2008
>         JavaOne(SM)
>         >         Conference
>         >         > Don't miss this year's exciting event. There's
>         still time to
>         >         save $100.
>         >         > Use priority code J8TL2D2.
>         >         >
>         >
>         http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
>         >         > _______________________________________________
>         >         gstreamer-devel mailing list
>         >         gstreamer-devel at lists.sourceforge.net
>         >
>         https://lists.sourceforge.net/lists/listinfo/gstreamer-devel
>         >
>         
>         





More information about the gstreamer-devel mailing list