Network streaming

[jyoti kulkarni]

Is there any network streaming application written using gstreamer

Thanks
On May 31, 2013 7:17 PM, "Chuck Crisler" <ccrisler at mutualink.net> wrote:

> Here is an old one. http://wiki.oz9aec.net/index.php/Gstreamer_cheat_sheet
>
> There are many others.
>
>
> On Fri, May 31, 2013 at 5:20 AM, jyoti kulkarni <jyotimk029 at gmail.com>wrote:
>
>> Please can you point me to sites which have working examples on network
>> streaming using gstreamer0.10
>>
>> thanks in advance
>> On May 31, 2013 1:12 PM, "Marc Leeman" <marc.leeman at gmail.com> wrote:
>>
>>> > First, learn about logging. Here is a reference pointer since you are
>>> using
>>> > 0.10. http://gstreamer.freedesktop.org/data/doc/gstreamer/0.10.30/
>>> >
>>> > Another link
>>> >
>>> http://gstreamer.freedesktop.org/data/doc/gstreamer/head/faq/html/chapter-troubleshooting.html
>>> >
>>> > More on logging:
>>> >
>>> http://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstInfo.html
>>> >
>>> > On the server, you don't want to 'decode'; you want to 'encode'. Use
>>> > 'encodebin' (I think this is the one). You should probably use
>>> 'decodebin'
>>> > on the client.
>>>
>>> In this particular case, he will be sending RAW video over the network
>>> in UDP form. This means that even though you will get the data on the
>>> receiver; you will have it in a format that your receiver knows little
>>> about (and you can only hope to have some defaults). It is raw; this
>>> means there is no or little information embedded in the stream. He
>>> will receive it (raw) and try to decode it as mpeg4; this will be a
>>> bit of a problem.
>>>
>>> The original information of the sender is far to little to come to a
>>> decent proposal or even an idea to understand what he wants to
>>> achieve. He has some kind of encoded data (probably MPEG2 or MPEG1,
>>> considering the container) and he wants to send it over the network in
>>> MPEG4. So he needs to decode it and then again encode it.
>>>
>>> Furthermore, sending in pure UDP is probably a bad idea; at the very
>>> least; split it in decent blocks under the MTU by using RTP to avoid
>>> UDP fragmentation.
>>>
>>> > You may have a problem with the IP Addresses. Search the archives for
>>> info
>>> > about IPv4 vs. IPv6 issues. One (either udpsink or udpsrc) uses IPv4 by
>>> > default, the other uses IPv6 by default.
>>> >
>>> > There are *LOTS* of examples available, both on the GStreamer site and
>>> > hundreds of other sites. Read all you can.
>>>
>>> There are indeed a lot of examples available. Any minimal google
>>> search will probably turn up something useful.
>>> _______________________________________________
>>> gstreamer-devel mailing list
>>> gstreamer-devel at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>>
>>
>> _______________________________________________
>> gstreamer-devel mailing list
>> gstreamer-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>>
>>
>
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20130603/6dd165be/attachment.html>