<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> <META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7233.69"> <TITLE>Error with embedded GStreamer on PPC</TITLE> </HEAD> <BODY>  Hello, I compiled GStreamer and all its dependencies for an embedded PPC(350Mhz). It's running a 2.6 kernel and glibc with NPTL support. I used the toolchain from ELDK When I start a GStreamer as a test I get this error: ># gst-launch fakesrc ! fakesink >Setting pipeline to PAUSED ... >Pipeline is PREROLLING ... > >GThread-ERROR **: file gthread-posix.c: line 356 (): error 'Cannot allocate memory' during 'pthread_create' >aborting... >Aborted I have already tried other setups with this results for a udpsrc ! fakesink: On a PPC 350 Mhz 2.4 + uClibc : 40-75% 2.6 + uClibc : 90-95% 2.6 + glibc without NPTL : 40-45% 2.6 + glibc with NPTL : ??? On a laptop 600Mhz x86 2.6 + glibc with NPTL : 3-4% Does somebody know why the cpu usage of GStreamer is soo high on the PPC? And why does it not start with NPTL? Thanks in advance, Thijs </BODY> </HTML> - - - - - - - DISCLAIMER- - - - - - - - Unless indicated otherwise, the information contained in this message is privileged and confidential, and is intended only for the use of the addressee(s) named above and others who have been specifically authorized to receive it. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message and/or attachments is strictly prohibited. The company accepts no liability for any damage caused by any virus transmitted by this email. Furthermore, the company does not warrant a proper and complete transmission of this information, nor does it accept liability for any delays. If you have received this message in error, please contact the sender and delete the message. Thank you.