<div dir="ltr">Hi All, I am trying to set bitrate=48000 on ffdec_mpeg4, and then transmitting the data using gstRTPbin and UDP. On the other end i tried calculating the data rate coming. I used WireShark for the same. After removing RTP/UDP/eth0 and all other header's the data rate is coming around 200kbps. FPS at the VideoSrc is 10. GOP size is 30. Can someone guide me what do i need to get the lower and constant bit rate from encoder. As this is eating all the bandwidth. and all my application is going for toss :"( Also i have seen there are some properties of ffenc_mpeg4 that are used for Rate Control. Please let me know. Also suggest to me to reduce overhead and ways to reduce the bitrate in RTP. I am in urgent need, Thanks a lot Manish </div>