<div dir="ltr"><div><div><div>I'm not aware of any way of setting properties on child elements through gst-launch command.<br><br></div>But you should be able to do the filtering using some tees, tsdemuxs, and decode bins.<br></div>The tsdemux element creates src pads with names that includes the PID of the stream served on that pad.<br><br></div><div>Imagine you have a program (10) with 1 video stream on PID 300, and two audio streams on PID 301, and 302.<br><br></div><div>You should be able to play the video with one of the audio streams using something like:<br><br></div><div>gst-launch-1.0 udpsrc ..... ! tsdemux program-number=10 name=d ! queue ! decodebin ! autovideosink d.audio_012d ! queue ! decodebin ! autoaudiosink<br><br></div><div>That should choose the program number 10, play the video, and play the audio on PID 301 (if it is part of the program). Note that the muxer uses dec numbers for the PID while the demuxer uses hex.<br></div><div>If you need to decode several programs at the same time, you can put a tee element in just before the tsdemux, and do a second branch with tsdemux<br><br></div><div>udpsrc ... ! tee name=t ! tsdemux program-number=10 name=d1 t. ! tsdemux program-number=11 name=d2 ....<br></div><div><br></div><div>You can see the templates for the pad names running<br></div><div>gst-inspect-1.0 tsdemux<br><br></div><div>Jesper<br></div><div><br><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, May 27, 2015 at 11:12 AM, Peter Maersk-Moller <span dir="ltr"><<a href="mailto:pmaersk@gmail.com" target="_blank">pmaersk@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div><div><div><div><div><div>Hi Jesper.<br><br></div>Thanks for the info. Very helpful and very useful.<br><br></div>Now for the other end, the consuming or decoding end. I assume I can do something similar with tsdemux.<br><br></div>  gst-launch-v udpsrc ..... ! mtsdemux program-number=10 ! .....<br><br></div>Haven't tested it yet, but it'll be close I think.<br><br></div>What if you want to control what program number to decode in a decodebin. Is there a less known, less documented way to parse this information to decodebin? I remember there is a way to set some parameters of a bin in GStreamer, however I have never found the formal documentations for that.<br><br></div>best regards.<br><br></div>Peter Maersk-Moller<br><div><div><div><div><br><br><br><div><br>Is there a way to filter which PID gets decoded when using decodebin or tsdemux<br></div></div></div></div></div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Wed, May 27, 2015 at 9:39 AM, Jesper Larsen <span dir="ltr"><<a href="mailto:knorr.jesper@gmail.com" target="_blank">knorr.jesper@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Well, my knowledge was just increased. You can actually set the prog-map preoperty using gst-launch<br><br>gst-launch-1.0 -v videotestsrc name=vsrc1 is-live=true do-timestamp=true
 ! x264enc ! queue ! h264parse ! muxer.sink_300 mpegtsmux name=muxer prog-map=program_map,sink_300=10,sink_301=11 ! queue ! 
tcpserversink host=0.0.0.0 sync-method=2 recover-policy=keyframe 
port=5000  videotestsrc name=vsrc2 is-live=true do-timestamp=true ! 
x264enc ! queue ! h264parse ! muxer.sink_301<br><br></div>This will put the video on PID 300 on program number 10, and PID 301 on program 11.<br></div><div><div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, May 27, 2015 at 8:12 AM, Jesper Larsen <span dir="ltr"><<a href="mailto:knorr.jesper@gmail.com" target="_blank">knorr.jesper@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div><div><div><div><div><div><div><div><div><div><div>You can set the PID when requesting a sink pad from the mux. I.e.<br><br>gst-launch-1.0 -v videotestsrc name=vsrc1 is-live=true do-timestamp=true
 ! x264enc ! queue ! h264parse ! muxer.sink_300 mpegtsmux name=muxer ! queue ! 
tcpserversink host=0.0.0.0 sync-method=2 recover-policy=keyframe 
port=5000  videotestsrc name=vsrc2 is-live=true do-timestamp=true ! 
x264enc ! queue ! h264parse ! muxer.sink_301<br><br></div>to use PID 300 and 301 instead.<br><br></div>I'm afraid you cannot configure which PIDs belongs to which program/PMT using gst-launch.<br></div>You need to set the "prog-map" property of the mpegtsmux element, which takes a GstStructure, and to my knowledge you cannot specify a GstStructure using gst-launch.<br><br></div>An example of setting the two videostreams to specific program numbers (3 and 4):<br><br></div><div>GstElement *mux;<br></div>GstStructure *pm;<br><br></div><div>mux = gst_element_factory_make ("mpegtsmux", NULL);<br></div><div><br></div>pm = gst_structure_new_empty ("program_map");<br></div>gst_structure_set (pm, "sink_300", G_TYPE_INT, 3,<br></div>                           "sink_301", G_TYPE_INT, 4, NULL);<br></div>g_object_set (mux, "prog-map", pm, NULL);<br><br></div>This will associate PID 300 to program 3, and PID 301 to program 4. When you add the audio streams you simply give those a fixed PID as well, and associate them with the program containing the correct video stream.<br><br></div>Ad Astra.<br></div>Jesper<br></div><div class="gmail_extra"><br><div class="gmail_quote"><div><div>On Tue, May 26, 2015 at 5:25 PM, Peter Maersk-Moller <span dir="ltr"><<a href="mailto:pmaersk@gmail.com" target="_blank">pmaersk@gmail.com</a>></span> wrote:<br></div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div><div dir="ltr"><div><div><div><div><div>Hi<br><br></div>When you are muxing multiple video streams with mpegtsmux, is there then a way to set/control (on the command line using gst-launch) the PIDs of video streams that the mpegtsmux chooses for each video stream?<br><br></div>A quick test with the following command line reveals mpegtsmux chooses PID 65 and 66.<br><br>gst-launch-1.0 -v videotestsrc name=vsrc1 is-live=true do-timestamp=true ! x264enc ! queue ! h264parse ! mpegtsmux name=muxer ! queue ! tcpserversink host=0.0.0.0 sync-method=2 recover-policy=keyframe port=5000  videotestsrc name=vsrc2 is-live=true do-timestamp=true ! x264enc ! queue ! h264parse ! muxer.<br><br></div>Assuming you have audio as well, is there a way to set/control which audio stream belongs to which video stream (for PAD/PMT) ?<br><br></div>Best regards<br></div>Peter MM<br></div>
<br></div></div>_______________________________________________<br>
gstreamer-devel mailing list<br>
<a href="mailto:gstreamer-devel@lists.freedesktop.org" target="_blank">gstreamer-devel@lists.freedesktop.org</a><br>
<a href="http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel" target="_blank">http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel</a><br>
<br></blockquote></div><br></div>
</blockquote></div><br></div>
</div></div><br>_______________________________________________<br>
gstreamer-devel mailing list<br>
<a href="mailto:gstreamer-devel@lists.freedesktop.org" target="_blank">gstreamer-devel@lists.freedesktop.org</a><br>
<a href="http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel" target="_blank">http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel</a><br>
<br></blockquote></div><br></div>
</div></div><br>_______________________________________________<br>
gstreamer-devel mailing list<br>
<a href="mailto:gstreamer-devel@lists.freedesktop.org">gstreamer-devel@lists.freedesktop.org</a><br>
<a href="http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel" target="_blank">http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel</a><br>
<br></blockquote></div><br></div>