<div>i tried to install gstreamer-0.10.25.tar.bz2 ile. when i compile it by using the above script i got a error as "libxml2"missing. so i downloaded libxml2 file and compiled that for arm processor using the same script and i exported the path of libxml2 by using </div><div>"export PATH=$PATH:/home/iqbal/Desktop/libxml2-2.7.6/"</div><div>and then again i compiled the same gstreamer-0.10.25 with using the same script. now i didnt find that error. but i am getting some different error shown below. whether am i doing the correct procedure?</div> <div>This is the error which i am getting when i compile the gstreamer after givng path of libxml2.</div><div>" CC gstvalue.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstparse.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstregistrybinary.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstxml.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstenumtypes.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstmarshal.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation LINK <a href="http://libgstreamer-0.10.la">libgstreamer-0.10.la</a> ../libtool: eval: line 950: syntax error near unexpected token `|' ../libtool: eval: line 950: `link -dump -symbols .libs/libgstreamer_0.10_la-gst.o .libs/libgstreamer_0.10_la-gstobject.o .libs/libgstreamer_0.10_la-gstbin.o .libs/libgstreamer_0.10_la-gstbuffer.o .libs/libgstreamer_0.10_la-gstbufferlist.o .libs/libgstreamer_0.10_la-gstbus.o .libs/libgstreamer_0.10_la-gstcaps.o .libs/libgstreamer_0.10_la-gstchildproxy.o .libs/libgstreamer_0.10_la-gstclock.o .libs/libgstreamer_0.10_la-gstdebugutils.o .libs/libgstreamer_0.10_la-gstelement.o .libs/libgstreamer_0.10_la-gstelementfactory.o .libs/libgstreamer_0.10_la-gsterror.o .libs/libgstreamer_0.10_la-gstevent.o .libs/libgstreamer_0.10_la-gstfilter.o .libs/libgstreamer_0.10_la-gstformat.o .libs/libgstreamer_0.10_la-gstghostpad.o .libs/libgstreamer_0.10_la-gstindex.o .libs/libgstreamer_0.10_la-gstindexfactory.o .libs/libgstreamer_0.10_la-gstinfo.o .libs/libgstreamer_0.10_la-gstinterface.o .libs/libgstreamer_0.10_la-gstiterator.o .libs/libgstreamer_0.10_la-gstmessage.o .libs/libgstreamer_0.10_la-gstminiobject.o .libs/libgstreamer_0.10_la-gstpad.o .libs/libgstreamer_0.10_la-gstpadtemplate.o .libs/libgstreamer_0.10_la-gstparamspecs.o .libs/libgstreamer_0.10_la-gstpipeline.o .libs/libgstreamer_0.10_la-gstplugin.o .libs/libgstreamer_0.10_la-gstpluginfeature.o .libs/libgstreamer_0.10_la-gstpoll.o .libs/libgstreamer_0.10_la-gstpreset.o .libs/libgstreamer_0.10_la-gstquark.o .libs/libgstreamer_0.10_la-gstquery.o .libs/libgstreamer_0.10_la-gstregistry.o .libs/libgstreamer_0.10_la-gstsegment.o .libs/libgstreamer_0.10_la-gststructure.o .libs/libgstreamer_0.10_la-gstsystemclock.o .libs/libgstreamer_0.10_la-gsttaglist.o .libs/libgstreamer_0.10_la-gsttagsetter.o .libs/libgstreamer_0.10_la-gsttask.o .libs/libgstreamer_0.10_la-gsttaskpool.o .libs/libgstreamer_0.10_la-gsttrace.o .libs/libgstreamer_0.10_la-gsttypefind.o .libs/libgstreamer_0.10_la-gsttypefindfactory.o .libs/libgstreamer_0.10_la-gsturi.o .libs/libgstreamer_0.10_la-gstutils.o .libs/libgstreamer_0.10_la-gstvalue.o .libs/libgstreamer_0.10_la-gstparse.o .libs/libgstreamer_0.10_la-gstregistrybinary.o .libs/libgstreamer_0.10_la-gstxml.o .libs/libgstreamer_0.10_la-gstenumtypes.o .libs/libgstreamer_0.10_la-gstmarshal.o parse/.libs/libgstparse.a | | /bin/sed 's/.* //' | sort | uniq > .libs/libgstreamer-0.10.exp' make[4]: *** [<a href="http://libgstreamer-0.10.la">libgstreamer-0.10.la</a>] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Building of glib library has failed iqbal@iqbal-laptop:~/Desktop/gstreamer-0.10.25$"</div><div>Kindly help me</div><div class="gmail_quote">On Sun, Dec 27, 2009 at 3:13 PM, Niamathullah sharief <<a href="mailto:armsharief@gmail.com">armsharief@gmail.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div>This is the script file i have... </div><div>i am running this script file each and every time..</div><div>#!/bin/sh export PATH=$PATH:/home/iqbal/Desktop/Niamath/toolchain/bin/ #export PARENT_DIR=/mnt/rbsys-icon1/ #export PATH=$PARENT_DIR/toolchain/bin/:/bin/:/usr/bin/:/sbin/:/mnt/monta-vista/montavista/pro/bin/ #export C6X_C_DIR="/mnt/rbsys-icon1/dvsdk_3_00_00_36/cgtools/include;/mnt/rbsys-icon1/dvsdk_3_00_00_36/cgtools/lib" #export KERNEL_DIR=$PARENT_DIR//kernel/linux-02.01.01.07/ #export SDK_DIR=$PARENT_DIR/dvsdk_3_00_00_36 export ARCH=arm export CROSS_COMPILE=arm-none-linux-gnueabi- export HOST=i686-pc-linux-gnu export TARGET=arm-linux-gnu #export ROOTFS=$PARENT_DIR/nfs-develop #export PREFIX=$PARENT_DIR/nfs-develop/usr/local export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig/ #export PATCH_SOURCE_DIR=/mnt/rbsys-icon1/patches_for_omap_sources/ #export BASE_SOURCE_DIR=/mnt/rbsys-icon1/sources/ #export DAVINCI_SOURCE_DIR=/mnt/rbsys-icon1/davinci_sources/ #export PATCH_SOURCE_DIR=/mnt/rbsys-icon1/patches_for_omap_sources/ #export QTSOURCEDIR=$DAVINCI_SOURCE_DIR/qt-embedded-linux-opensource-src-4.5.2/ #export QTDIR=$DAVINCI_SOURCE_DIR/qt-embedded-linux-opensource-src-4.5.2/ #export FLASHCOMPONENT=$ROOTFS/flash_component/ #export QMAKESPEC=$QTSOURCEDIR/mkspecs/qws/linux-arm-g++/ export CFLAGS="-O3 -march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8 -mfloat-abi=softfp -mfpu=neon -ftree-vectorize -funroll-all-loops" export CXXFLAGS="-O3 -march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8 -mfloat-abi=softfp -mfpu=neon -ftree-vectorize -funroll-all-loops" CC=arm-none-linux-gnueabi-gcc CXX=arm-none-linux-gnueabi-g++ LD=arm-none-linux-gnueabi-ld AS=arm-none-linux-gnueabi-as AR=arm-none-linux-gnueabi-ar RANLIB=arm-none-linux-gnueabi-ranlib STRIP=arm-none-linux-gnueabi-strip OBJCOPY=arm-none-linux-gnueabi-objcopy OBJDUMP=arm-none-linux-gnueabi-objdump ./configure --prefix=$PREFIX --build=i386-pc-linux-gnu --host=arm-linux-gnu --without-python --cache-file=cache-file PLATFORM=MX51 if [ $? != 0 ] then echo "Configuration of glib library has failed"; exit 1; fi make if [ $? != 0 ] then echo "Building of glib library has failed "; exit 1; fi make uninstall make install if [ $? != 0 ] then echo "Installing of glib-library has failed "; exit 1; fi </div><div> IN this cript i know about this cross compiler exporting and all other thngs i dont know. i got this script from my friend. he is using this script to compile for OMAP arm and i have to compile for freescale processor arm board.</div> <div><div class="h5"> <div> </div>ll me. AND in this two files which one have to compile? whether it is needed to export any library files?i mean codec files? please help me <div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div> </div> doing cross-compilation and being a novice is not easy :-) you said that you exported some env var for you arm board. What exactly did you do ? Vincent Torri PS: please, stop top post your comments<div><div> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Sun, Dec 27, 2009 at 2:04 PM, Vincent Torri <<a href="mailto:vtorri@univ-evry.fr" target="_blank">vtorri@univ-evry.fr</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Sun, 27 Dec 2009, Niamathullah sharief wrote: No i didnt install any gst-plugin-base. i dont know what are all the files <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> needed to compile the gstreamer for ARM board. and what are the commands used to compile. what are all things i have to export. so pleae help me. so tell me what are all the files needed to compile for arm. now i have 1)ARM coss compile </blockquote> download <a href="http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-0.10.25.tar.bz2" target="_blank">http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-0.10.25.tar.bz2</a> and <a href="http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-0.10.25.tar.bz2" target="_blank">http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-0.10.25.tar.bz2</a> 2)gst-fsl-plugin-1.6.0 <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> 3)fsl-mm-codeclib-1.6.0 THis are the steps i followed o compile the gstreamer 1)i exported cross compiler path. </blockquote> compile and install gstreamer for your platform if you use: ./configure --prefix=/my/prefix/for/fsl execute: export PKG_CONFIG_PATH=/my/prefix/for/fsl/lib/pkgconfig Then compile and install gst-plugins-base for your platform with also: ./configure --prefix=/my/prefix/for/fsl 2)then i tried to compile this gst-fsl-plugin-1.6.0 <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> </blockquote> Vincent Torri </blockquote> </blockquote> </div></div></blockquote></div> </div></div></blockquote></div>