Dumping 131 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080609' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = true (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'Sony Corporation' (string) system.chassis.type = 'Notebook' (string) system.firmware.release_date = '07/10/2006' (string) system.firmware.vendor = 'Phoenix Technologies LTD' (string) system.firmware.version = 'R0083N0' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 10146 (0x27a2) (int) system.hardware.primary_video.vendor = 32902 (0x8086) (int) system.hardware.product = 'VGN-SZ1HP_B' (string) system.hardware.serial = '28240763-5000586' (string) system.hardware.uuid = 'D34B9FC0-4956-11DA-8B1F-0013A92976E7' (string) system.hardware.vendor = 'Sony Corporation' (string) system.hardware.version = 'J001GXS2' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.27-9-generic' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Genuine Intel(R) CPU T2300 @ 1.66GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Genuine Intel(R) CPU T2300 @ 1.66GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sony Vaio Jogdial' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event5' (string) input.product = 'Sony Vaio Jogdial' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_backlight' info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic Backlight Device' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string) laptop_panel.access_method = 'general' (string) laptop_panel.num_levels = 8 (0x8) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/sony' (string) org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event2' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event3' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'input.keymap', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sony Vaio Keys' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.keymap.data = {'0x06:mute', '0x07:volumedown', '0x08:volumeup', '0x09:brightnessdown', '0x0a:brightnessup', '0x0b:switchvideomode', '0x0e:zoom', '0x10:suspend'} (string list) input.product = 'Sony Vaio Keys' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'fi' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/SNY6001:00/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' battery.charge_level.current = 15530 (0x3caa) (int) battery.charge_level.design = 57720 (0xe178) (int) battery.charge_level.last_full = 51300 (0xc864) (int) battery.charge_level.percentage = 30 (0x1e) (int) battery.charge_level.rate = 14581 (0x38f5) (int) battery.is_rechargeable = true (bool) battery.model = '' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = true (bool) battery.remaining_time = 3834 (0xefa) (int) battery.reporting.current = 15530 (0x3caa) (int) battery.reporting.design = 57720 (0xe178) (int) battery.reporting.last_full = 51300 (0xc864) (int) battery.reporting.rate = 14581 (0x38f5) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mWh' (string) battery.serial = '' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'Sony Corp.' (string) battery.voltage.current = 11072 (0x2b40) (int) battery.voltage.design = 11100 (0x2b5c) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/PNP0C09:00/PNP0C0A:00/power_supply/BAT1' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' ac_adapter.present = false (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/PNP0C09:00/ACPI0003:00/power_supply/ACAD' (string) udi = '/org/freedesktop/Hal/devices/pnp_SNY9001' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SNY9001)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SNY9001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.id = 'SNY9001' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_SNY6001' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SNY6001)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SNY6001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.id = 'SNY6001' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_INT0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (INT0800)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.id = 'INT0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_sonypi' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (sonypi)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_sonypi' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/sonypi' (string) platform.id = 'sonypi' (string) udi = '/org/freedesktop/Hal/devices/platform_sony_laptop' info.linux.driver = 'sony-laptop' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (sony-laptop)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_sony_laptop' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/sony-laptop' (string) platform.id = 'sony-laptop' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (iTCO_wdt)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string) platform.id = 'iTCO_wdt' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0' info.callouts.add = {'hal-probe-vmmouse'} (string list) info.capabilities = {'input', 'input.mouse', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'AlpsPS/2 ALPS GlidePoint' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0' (string) input.device = '/dev/input/event8' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'AlpsPS/2 ALPS GlidePoint' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.callouts.add = {'hal-probe-vmmouse'} (string list) info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'PS/2 Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'PS/2 Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'fi' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_dock_0' info.docked = false (bool) info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dock.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dock.0' (string) org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list) org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list) platform.id = 'dock.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27da' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801G (ICH7 Family) SMBus Controller' (string) pci.product_id = 10202 (0x27da) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 143 (0x8f) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string) pci.product_id = 10180 (0x27c4) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 2 (0x2) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'ST98823AS' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) info.product = 'ST98823AS' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '3.14' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'ST98823AS' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 80026361856 (0x12a1f16000) (uint64) storage.requires_eject = false (bool) storage.serial = '1ATA_ST98823AS_3PK0CMPY' (string) storage.size = 80026361856 (0x12a1f16000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_50681E32681E16F6' block.device = '/dev/sda8' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 8 (0x8) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'docs' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_50681E32681E16F6' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda8' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'docs' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list) volume.mount_point = '/media/docs' (string) volume.num_blocks = 65882502 (0x3ed4986) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 8 (0x8) (int) volume.partition.start = 46291908096 (0xac7367600) (uint64) volume.size = 33731841024 (0x7da930c00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '50681E32681E16F6' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_7fa91606_c2ca_41af_bf4e_4fed5e3a7a0c' block.device = '/dev/sda7' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 7 (0x7) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7fa91606_c2ca_41af_bf4e_4fed5e3a7a0c' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda7' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 43005942 (0x29037f6) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 7 (0x7) (int) volume.partition.start = 24272833536 (0x5a6c60c00) (uint64) volume.size = 22019042304 (0x5206fec00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '7fa91606-c2ca-41af-bf4e-4fed5e3a7a0c' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_b8880fcc_d854_475b_bd41_dc7696e53a4f' block.device = '/dev/sda6' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b8880fcc_d854_475b_bd41_dc7696e53a4f' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda6' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 4192902 (0x3ffa86) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 6 (0x6) (int) volume.partition.start = 22126035456 (0x526d08200) (uint64) volume.size = 2146765824 (0x7ff50c00) (uint64) volume.uuid = 'b8880fcc-d854-475b-bd41-dc7696e53a4f' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_e665a461_77f8_4550_851b_6bc6722aae39' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_e665a461_77f8_4550_851b_6bc6722aae39' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda5' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/boot' (string) volume.num_blocks = 208782 (0x32f8e) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 22019106816 (0x52070e800) (uint64) volume.size = 106896384 (0x65f1c00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'e665a461-77f8-4550-851b-6bc6722aae39' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda2' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = '' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 22019074560 (0x520706a00) (uint64) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_4C54A5A254A58EF0' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST98823AS_3PK0CMPY' (string) info.product = 'VAIO' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4C54A5A254A58EF0' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'VAIO' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list) volume.mount_point = '/media/winxp' (string) volume.num_blocks = 43005942 (0x29037f6) (uint64) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x07' (string) volume.partition.uuid = '' (string) volume.size = 22019042304 (0x5206fec00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '4C54A5A254A58EF0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27df' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) pci.product = '82801G (ICH7 Family) IDE Controller' (string) pci.product_id = 10207 (0x27df) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'UJ-842D' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'MATSHITA' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/storage_model_UJ_842D' access_control.file = '/dev/scd0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/scd0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_UJ_842D' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string) info.product = 'UJ-842D' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_UJ_842D' (string) info.vendor = 'MATSHITA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 4234 (0x108a) (int) storage.cdrom.write_speeds = {'4234', '2822', '2117', '1411', '706'} (string list) storage.drive_type = 'cdrom' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'UJ-842D' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'MATSHITA' (string) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string) pci.product_id = 10169 (0x27b9) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2448' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 Mobile PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 Mobile PCI Bridge' (string) pci.product_id = 9288 (0x2448) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_104c_803b' info.linux.driver = 'tifm_7xx1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_803b' (string) info.vendor = 'Texas Instruments' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.2' (string) pci.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string) pci.product_id = 32827 (0x803b) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Texas Instruments' (string) pci.vendor_id = 4172 (0x104c) (int) udi = '/org/freedesktop/Hal/devices/pci_104c_803a' info.linux.driver = 'ohci1394' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_803a' (string) info.vendor = 'Texas Instruments' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.1' (string) pci.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string) pci.product_id = 32826 (0x803a) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Texas Instruments' (string) pci.vendor_id = 4172 (0x104c) (int) udi = '/org/freedesktop/Hal/devices/pci_104c_8039' info.linux.driver = 'yenta_cardbus' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'PCIxx12 Cardbus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_8039' (string) info.vendor = 'Texas Instruments' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.0' (string) pci.product = 'PCIxx12 Cardbus Controller' (string) pci.product_id = 32825 (0x8039) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Texas Instruments' (string) pci.vendor_id = 4172 (0x104c) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) pci.product_id = 10188 (0x27cc) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'N79' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.vendor = 'Nokia Mobile Phones' (string) linux.device_file = '/dev/bus/usb/005/007' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = false (bool) usb_device.configuration = 'Bulk transfer method configuration' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 2 (0x2) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 7 (0x7) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 12 (0xc) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'N79' (string) usb_device.product_id = 391 (0x187) (int) usb_device.serial = '356387020332517' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Nokia Mobile Phones' (string) usb_device.vendor_id = 1057 (0x421) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0_1' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.11' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.description = 'UsbPnDataAlt0' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.11' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0_0' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.10' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.description = 'UsbPnComm' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 254 (0xfe) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.10' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if7' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.7' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.number = 7 (0x7) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.7' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if9' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.9' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.number = 9 (0x9) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.9' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if5' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.5' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.number = 5 (0x5) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 8 (0x8) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.5' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if8' info.capabilities = {'obex'} (string list) info.category = 'obex' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.8' (string) obex.type = 'pcsuite' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.description = 'PC Suite Services' (string) usb.interface.number = 8 (0x8) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 11 (0xb) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.8' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if6' info.capabilities = {'obex'} (string list) info.category = 'obex' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.6' (string) obex.type = 'syncml-sync' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.description = 'SYNCML-SYNC' (string) usb.interface.number = 6 (0x6) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 11 (0xb) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.6' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if4' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.4' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.description = 'CDC Data Interface' (string) usb.interface.number = 4 (0x4) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.4' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if3' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.3' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.description = 'CDC Comms Interface' (string) usb.interface.number = 3 (0x3) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.3' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if2' info.linux.driver = 'cdc_acm' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.2' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.description = 'CDC Data Interface' (string) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.2' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1' info.linux.driver = 'cdc_acm' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.1' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.description = 'CDC Comms Interface' (string) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1_serial_unknown_0' info.capabilities = {'serial', 'modem'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1' (string) info.product = 'Serial Port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1_serial_unknown_0' (string) linux.device_file = '/dev/ttyACM0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.1/tty/ttyACM0' (string) modem.command_sets = {'V.250'} (string list) serial.device = '/dev/ttyACM0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if1' (string) serial.port = 0 (0x0) (int) serial.type = 'unknown' (string) udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_421_187_356387020332517_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'Bulk transfer method configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.description = 'MTP' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 12 (0xc) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 391 (0x187) (int) usb.serial = '356387020332517' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Nokia Mobile Phones' (string) usb.vendor_id = 1057 (0x421) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_1830_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'Visual Communication Camera VGP-VCC2' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_1830_noserial' (string) info.vendor = 'Ricoh Co., Ltd' (string) linux.device_file = '/dev/bus/usb/005/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-6' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-6' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Visual Communication Camera VGP-VCC2' (string) usb_device.product_id = 6192 (0x1830) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Ricoh Co., Ltd' (string) usb_device.vendor_id = 1482 (0x5ca) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_1830_noserial_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_1830_noserial' (string) info.product = 'USB Imaging Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_1830_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 6 (0x6) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Imaging Interface' (string) usb.product_id = 6192 (0x1830) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Ricoh Co., Ltd' (string) usb.vendor_id = 1482 (0x5ca) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'UMH-U09' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00' (string) info.vendor = 'Sony Corp.' (string) linux.device_file = '/dev/bus/usb/005/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1106 (0x452) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'UMH-U09' (string) usb_device.product_id = 641 (0x281) (int) usb_device.serial = 'F0000010BD00' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Sony Corp.' (string) usb_device.vendor_id = 1356 (0x54c) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1106 (0x452) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 641 (0x281) (int) usb.serial = 'F0000010BD00' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Sony Corp.' (string) usb.vendor_id = 1356 (0x54c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/host4' (string) scsi_host.host = 4 (0x4) (int) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/host4/scsi_host/host4' (string) scsi_host.host = 4 (0x4) (int) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/host4/target4:0:0/4:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 4 (0x4) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'USB HS-CARD' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Sony' (string) udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/host4/target4:0:0/4:0:0:0/scsi_generic/sg2' (string) scsi_generic.device = '/dev/sg2' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Sony_USB_HS_CARD_F0000010BD00_0_0' access_control.file = '/dev/sdb' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Sony_USB_HS_CARD_F0000010BD00_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0_scsi_host_scsi_device_lun0' (string) info.product = 'USB HS-CARD' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Sony_USB_HS_CARD_F0000010BD00_0_0' (string) info.vendor = 'Sony' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/host4/target4:0:0/4:0:0:0/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '4.52' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'USB HS-CARD' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_54c_281_F0000010BD00_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Sony_USB_HS-CARD_F0000010BD00-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Sony' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) pci.product_id = 10187 (0x27cb) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'Bluetooth Controller (ALPS/UGPZ6)' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial' (string) info.vendor = 'Alps Electric Co., Ltd' (string) linux.device_file = '/dev/bus/usb/004/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 224 (0xe0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 6421 (0x1915) (int) usb_device.device_subclass = 1 (0x1) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 3 (0x3) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Bluetooth Controller (ALPS/UGPZ6)' (string) usb_device.product_id = 12300 (0x300c) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Alps Electric Co., Ltd' (string) usb_device.vendor_id = 1102 (0x44e) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial' (string) info.product = 'USB Application Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.2' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 6421 (0x1915) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 254 (0xfe) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.2' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Application Specific Interface' (string) usb.product_id = 12300 (0x300c) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if1' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.1' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 6421 (0x1915) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 12300 (0x300c) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 6421 (0x1915) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 12300 (0x300c) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0_bluetooth_hci_0' bluetooth_hci.address = 0 (0x0) (uint64) bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0' (string) info.capabilities = {'bluetooth_hci'} (string list) info.category = 'bluetooth_hci' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0' (string) info.product = 'Bluetooth Host Controller Interface' (string) info.subsystem = 'bluetooth' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300c_noserial_if0_bluetooth_hci_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'bluetooth' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/bluetooth/hci0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) pci.product_id = 10186 (0x27ca) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) pci.product_id = 10185 (0x27c9) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) pci.product_id = 10184 (0x27c8) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27d6' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d6' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 4' (string) pci.product_id = 10198 (0x27d6) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d4' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d4' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 3' (string) pci.product_id = 10196 (0x27d4) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_11ab_4351' info.linux.driver = 'sky2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d4' (string) info.product = '88E8036 PCI-E Fast Ethernet Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_11ab_4351' (string) info.vendor = 'Marvell Technology Group Ltd.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0' (string) pci.product = '88E8036 PCI-E Fast Ethernet Controller' (string) pci.product_id = 17233 (0x4351) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Marvell Technology Group Ltd.' (string) pci.vendor_id = 4523 (0x11ab) (int) udi = '/org/freedesktop/Hal/devices/net_00_13_a9_29_76_e7' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_11ab_4351' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_13_a9_29_76_e7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0/net/eth0' (string) net.80203.mac_address = 84442445543 (0x13a92976e7) (uint64) net.address = '00:13:a9:29:76:e7' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_11ab_4351' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 2' (string) pci.product_id = 10194 (0x27d2) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_4222' info.linux.driver = 'iwl3945' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string) info.product = 'PRO/Wireless 3945ABG [Golan] Network Connection' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0' (string) pci.product = 'PRO/Wireless 3945ABG [Golan] Network Connection' (string) pci.product_id = 16930 (0x4222) (int) pci.subsys_product_id = 4177 (0x1051) (int) pci.subsys_vendor = 'Intel Corporation' (string) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/net_00_13_02_1d_a9_9f_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_13_02_1d_a9_9f_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/net/wmaster0' (string) net.address = '00:13:02:1d:a9:9f' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) udi = '/org/freedesktop/Hal/devices/net_00_13_02_1d_a9_9f' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_13_02_1d_a9_9f' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/net/wlan0' (string) net.80211.mac_address = 81639877023 (0x13021da99f) (uint64) net.address = '00:13:02:1d:a9:9f' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) udi = '/org/freedesktop/Hal/devices/iwl_wlan_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.product = 'Intel PRO/Wireless WLAN Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/iwl_wlan_switch' (string) killswitch.access_method = 'ipw' (string) killswitch.type = 'wlan' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 1' (string) pci.product_id = 10192 (0x27d0) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) pci.product_id = 10200 (0x27d8) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.product = 'HDA Intel Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'STAC92xx Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'STAC92xx Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'HDA Intel ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27a6' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a6' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string) pci.product_id = 10150 (0x27a6) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27a2' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string) pci.product_id = 10146 (0x27a2) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0' drm.dri_library = 'i915' (string) info.capabilities = {'drm'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0' (string) info.vendor = 'Intel Corporation' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' info.linux.driver = 'agpgart-intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string) pci.product_id = 10144 (0x27a0) (int) pci.subsys_product_id = 33254 (0x81e6) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27a0' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 131 device(s) from the Global Device List. ------------------------------------------------