[Bug 64764] 845G: crtc active state doesn't match with hw state
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Thu May 23 11:48:15 PDT 2013
https://bugs.freedesktop.org/show_bug.cgi?id=64764
--- Comment #16 from mlsemon35 at gmail.com ---
(In reply to comment #15)
> On Thu, May 23, 2013 at 10:30 AM, <bugzilla-daemon at freedesktop.org> wrote:
> > root:~$ xset dpms force off; sleep 2; intel_reg_dumper > dumper.out
> > Gen2/3 Ranges are not supported. Please use unsafe access.Aborted
>
> This bug is why I've asked you to use the latest git ;-)
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Gotcha. Nice git, BTW. Not everybody puts master builds into a convenient
tarball.
After installing Python 3.3.2 and the latest git intel-gpu-tools, the Gen2/3
error message remains, but the output file is not empty this time.
A note on monitor behavior: It looks like the first time this is run, the
monitor does indeed blank, stay off, power light is orange, etc., until the Alt
key is pressed to wake the monitor. It's the later tries that cause the
monitor to blank and quickly unblank.
DCC: 0x00000000 ()
CHDECMISC: 0x16f000e8 (XOR bank, ch2 enh disabled, ch1 enh
enabled, ch0 enh disabled, flex disabled, ep not present)
C0DRB0: 0x00000000 (0x0000)
C0DRB1: 0x00000000 (0x0000)
C0DRB2: 0x00000000 (0x0000)
C0DRB3: 0x00000000 (0x0000)
C1DRB0: 0x5f1090a0 (0x90a0)
C1DRB1: 0x694c5f10 (0x5f10)
C1DRB2: 0x6f4c694c (0x694c)
C1DRB3: 0x00066f4c (0x6f4c)
C0DRA01: 0x00000000 (0x0000)
C0DRA23: 0x00000000 (0x0000)
C1DRA01: 0x01560006 (0x0006)
C1DRA23: 0x03810156 (0x0156)
PGETBL_CTL: 0x2ffe0001
VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10,
p2 = 4)
DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled,
DPLLB input buffer disabled)
CACHE_MODE_0: 0x00000000
D_STATE: 0x00000000
DSPCLK_GATE_D: 0x00000008 (clock gates disabled: OVRUNIT)
RENCLK_GATE_D1: 0x00000000
RENCLK_GATE_D2: 0x00000000
SDVOB: 0x00000000 (disabled, pipe A, stall disabled,
not detected)
SDVOC: 0x00000000 (disabled, pipe A, stall disabled,
not detected)
SDVOUDI: 0x00000000
DSPARB: 0x0000005f
DSPFW1: 0x00000000
DSPFW2: 0x00000000
DSPFW3: 0x00000000
ADPA: 0x00000c18 (disabled, pipe A, +hsync, +vsync)
LVDS: 0x00003001 (disabled, pipe A, 18 bit, 1
channel)
DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync,
-vsync)
DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync,
-vsync)
DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync,
-vsync)
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
BLC_PWM_CTL: 0x00000000
BLC_PWM_CTL2: 0x00000000
PP_CONTROL: 0x00000000 (power target: off)
PP_STATUS: 0x00000000 (off, not ready, sequencing idle)
PP_ON_DELAYS: 0x00000000
PP_OFF_DELAYS: 0x00000000
PP_DIVISOR: 0x00000000
PFIT_CONTROL: 0x00000000
PFIT_PGM_RATIOS: 0x00000000
PORT_HOTPLUG_EN: 0x00000000
PORT_HOTPLUG_STAT: 0x00000000
DSPACNTR: 0x58000000 (disabled, pipe A)
DSPASTRIDE: 0x00002000 (8192 bytes)
DSPAPOS: 0x00000000 (0, 0)
DSPASIZE: 0x00000000 (1, 1)
DSPABASE: 0x00800000
DSPASURF: 0x10200000
DSPATILEOFF: 0x00000000
PIPEACONF: 0x80000000 (enabled, single-wide)
PIPEASRC: 0x04ff03ff (1280, 1024)
PIPEASTAT: 0x00000207 (status: VSYNC_INT_STATUS
SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
PIPEA_GMCH_DATA_M: 0x00000000
PIPEA_GMCH_DATA_N: 0x00000000
PIPEA_DP_LINK_M: 0x00000000
PIPEA_DP_LINK_N: 0x00000000
CURSOR_A_BASE: 0x01000000
CURSOR_A_CONTROL: 0x04000000
CURSOR_A_POSITION: 0x007e018b
FPA0: 0x0003160d (n = 3, m1 = 22, m2 = 13)
FPA1: 0x0003160d (n = 3, m1 = 22, m2 = 13)
DPLL_A: 0x90810000 (enabled, non-dvo, default clock,
DAC/serial mode, p1 = 3, p2 = 4)
DPLL_A_MD: 0x00000000
HTOTAL_A: 0x069704ff (1280 active, 1688 total)
HBLANK_A: 0x069704ff (1280 start, 1688 end)
HSYNC_A: 0x059f052f (1328 start, 1440 end)
VTOTAL_A: 0x042903ff (1024 active, 1066 total)
VBLANK_A: 0x042903ff (1024 start, 1066 end)
VSYNC_A: 0x04030400 (1025 start, 1028 end)
BCLRPAT_A: 0x00000000
VSYNCSHIFT_A: 0x00000000
DSPBCNTR: 0x00000000 (disabled, pipe A)
DSPBSTRIDE: 0x00000000 (0 bytes)
DSPBPOS: 0x00000000 (0, 0)
DSPBSIZE: 0x00000000 (1, 1)
DSPBBASE: 0x00000000
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000
PIPEBCONF: 0x00000000 (disabled, single-wide)
PIPEBSRC: 0x00000000 (1, 1)
PIPEBSTAT: 0x00000000 (status:)
PIPEB_GMCH_DATA_M: 0x00000000
PIPEB_GMCH_DATA_N: 0x00000000
PIPEB_DP_LINK_M: 0x00000000
PIPEB_DP_LINK_N: 0x00000000
CURSOR_B_BASE: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_B_POSITION: 0x00000000
FPB0: 0x00000000 (n = 0, m1 = 0, m2 = 0)
FPB1: 0x00000000 (n = 0, m1 = 0, m2 = 0)
DPLL_B: 0x00000000 (disabled, non-dvo, VGA, default
clock, DAC/serial mode, p1 = 2, p2 = 2)
DPLL_B_MD: 0x00000000
HTOTAL_B: 0x00000000 (1 active, 1 total)
HBLANK_B: 0x00000000 (1 start, 1 end)
HSYNC_B: 0x00000000 (1 start, 1 end)
VTOTAL_B: 0x00000000 (1 active, 1 total)
VBLANK_B: 0x00000000 (1 start, 1 end)
VSYNC_B: 0x00000000 (1 start, 1 end)
BCLRPAT_B: 0x00000000
VSYNCSHIFT_B: 0x00000000
VCLK_DIVISOR_VGA0: 0x00021207
VCLK_DIVISOR_VGA1: 0x00031406
VCLK_POST_DIV: 0x0000888b
VGACNTRL: 0x80000000 (disabled)
TV_CTL: 0x069704ff
TV_DAC: 0x069704ff
TV_CSC_Y: 0x042903ff
TV_CSC_Y2: 0x04030400
TV_CSC_U: 0x00000000
TV_CSC_U2: 0x04ff03ff
TV_CSC_V: 0x00000000
TV_CSC_V2: 0x00000000
TV_CLR_KNOBS: 0x00000000
TV_CLR_LEVEL: 0x00000000
TV_H_CTL_1: 0x00000000
TV_H_CTL_2: 0x00000000
TV_H_CTL_3: 0x00000000
TV_V_CTL_1: 0x00000000
TV_V_CTL_2: 0x00000000
TV_V_CTL_3: 0x00000000
TV_V_CTL_4: 0x00000000
TV_V_CTL_5: 0x00000000
TV_V_CTL_6: 0x00000000
TV_V_CTL_7: 0x00000000
TV_SC_CTL_1: 0x000248c3
TV_SC_CTL_2: 0x0014cc0c
TV_SC_CTL_3: 0x00000000
TV_WIN_POS: 0x00000000
TV_WIN_SIZE: 0x00000000
TV_FILTER_CTL_1: 0x00000000
TV_FILTER_CTL_2: 0x00000000
TV_FILTER_CTL_3: 0x00000000
TV_CC_CONTROL: 0x00000000
TV_CC_DATA: 0x00000000
TV_H_LUMA_0: 0x00000000
TV_H_LUMA_59: 0x00000000
TV_H_CHROMA_0: 0x069704ff
TV_H_CHROMA_59: 0x00000000
FBC_CFB_BASE: 0x00000000
FBC_LL_BASE: 0x00000000
FBC_CONTROL: 0x00000000
FBC_COMMAND: 0x00000000
FBC_STATUS: 0x00000000
FBC_CONTROL2: 0x00000000
FBC_FENCE_OFF: 0x00000000
FBC_MOD_NUM: 0x00000000
MI_MODE: 0x00000000
MI_ARB_STATE: 0x00000000
MI_RDRET_STATE: 0x00000000
ECOSKPD: 0x00000307
DP_B: 0x00000000
DPB_AUX_CH_CTL: 0x00000000
DPB_AUX_CH_DATA1: 0x00000000
DPB_AUX_CH_DATA2: 0x00000000
DPB_AUX_CH_DATA3: 0x00000000
DPB_AUX_CH_DATA4: 0x00000000
DPB_AUX_CH_DATA5: 0x00000000
DP_C: 0x069704ff
DPC_AUX_CH_CTL: 0x042903ff
DPC_AUX_CH_DATA1: 0x04030400
DPC_AUX_CH_DATA2: 0x00000000
DPC_AUX_CH_DATA3: 0x04ff03ff
DPC_AUX_CH_DATA4: 0x00000000
DPC_AUX_CH_DATA5: 0x00000000
DP_D: 0x00000000
DPD_AUX_CH_CTL: 0x00000000
DPD_AUX_CH_DATA1: 0x00000000
DPD_AUX_CH_DATA2: 0x00000000
DPD_AUX_CH_DATA3: 0x00000000
DPD_AUX_CH_DATA4: 0x00000000
DPD_AUX_CH_DATA5: 0x00000000
AUD_CONFIG: 0x069704ff
AUD_HDMIW_STATUS: 0x00000000
AUD_CONV_CHCNT: 0x00000000
VIDEO_DIP_CTL: 0x00000000
AUD_PINW_CNTR: 0x00000000
AUD_CNTL_ST: 0x00000000
AUD_PIN_CAP: 0x00000000
AUD_PINW_CAP: 0x00000000
AUD_PINW_UNSOLRESP: 0x00000000
AUD_OUT_DIG_CNVT: 0x00000000
AUD_OUT_CWCAP: 0x00000000
AUD_GRP_CAP: 0x00000000
FENCE 0: 0x00800461 (enabled, X tiled, 32768 pitch,
0x00800000 - 0x01800000 (16384kb))
FENCE 1: 0x01b80041 (enabled, X tiled, 8192 pitch,
0x01b00000 - 0x01c00000 (1024kb))
FENCE 2: 0x01880021 (enabled, X tiled, 2048 pitch,
0x01800000 - 0x01900000 (1024kb))
FENCE 3: 0x02800021 (enabled, X tiled, 2048 pitch,
0x02800000 - 0x02900000 (1024kb))
FENCE 4: 0x01780021 (enabled, X tiled, 2048 pitch,
0x01700000 - 0x01800000 (1024kb))
FENCE 5: 0x02880051 (enabled, X tiled, 16384 pitch,
0x02800000 - 0x02900000 (1024kb))
FENCE 6: 0x01c80051 (enabled, X tiled, 16384 pitch,
0x01c00000 - 0x01d00000 (1024kb))
FENCE 7: 0x01f00041 (enabled, X tiled, 8192 pitch,
0x01f00000 - 0x02000000 (1024kb))
FENCE 8: 0x00000000 (disabled)
FENCE 9: 0x00000000 (disabled)
FENCE 10: 0x00000000 (disabled)
FENCE 11: 0x00000000 (disabled)
FENCE 12: 0x00000000 (disabled)
FENCE 13: 0x00000000 (disabled)
FENCE 14: 0x00000000 (disabled)
FENCE 15: 0x00000000 (disabled)
FENCE START 0: 0x00000000 (disabled)
FENCE END 0: 0x00000000 (disabled)
FENCE START 1: 0x00000000 (disabled)
FENCE END 1: 0x00000000 (disabled)
FENCE START 2: 0x00000000 (disabled)
FENCE END 2: 0x00000000 (disabled)
FENCE START 3: 0x00000000 (disabled)
FENCE END 3: 0x00000000 (disabled)
FENCE START 4: 0x00000000 (disabled)
FENCE END 4: 0x00000000 (disabled)
FENCE START 5: 0x00000000 (disabled)
FENCE END 5: 0x00000000 (disabled)
FENCE START 6: 0x00000000 (disabled)
FENCE END 6: 0x00000000 (disabled)
FENCE START 7: 0x00000000 (disabled)
FENCE END 7: 0x00000000 (disabled)
FENCE START 8: 0x00000000 (disabled)
FENCE END 8: 0x00000000 (disabled)
FENCE START 9: 0x00000000 (disabled)
FENCE END 9: 0x00000000 (disabled)
FENCE START 10: 0x00000000 (disabled)
FENCE END 10: 0x00000000 (disabled)
FENCE START 11: 0x00000000 (disabled)
FENCE END 11: 0x00000000 (disabled)
FENCE START 12: 0x00000000 (disabled)
FENCE END 12: 0x00000000 (disabled)
FENCE START 13: 0x00000000 (disabled)
FENCE END 13: 0x00000000 (disabled)
FENCE START 14: 0x00000000 (disabled)
FENCE END 14: 0x00000000 (disabled)
FENCE START 15: 0x00000000 (disabled)
FENCE END 15: 0x00000000 (disabled)
INST_PM: 0x00000000
pipe A dot 108000 n 3 m1 22 m2 13 p1 3 p2 4
pipe B dot 72000 n 0 m1 0 m2 0 p1 2 p2 2
--
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20130523/ed6a7cd3/attachment-0001.html>
More information about the intel-gfx-bugs
mailing list