<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO --- - [snb regression] pll readout blows up on p1 == 0" href="https://bugs.freedesktop.org/show_bug.cgi?id=76738#c5">Comment # 5</a> on <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO --- - [snb regression] pll readout blows up on p1 == 0" href="https://bugs.freedesktop.org/show_bug.cgi?id=76738">bug 76738</a> from <a class="email" href="mailto:peter.senna@gmail.com" title="Peter Senna Tschudin <peter.senna@gmail.com>"> Peter Senna Tschudin</a> <pre>Details of my setup: - I use a dock station from Toshiba which has one HDMI and one VGA output. - The monitor connected to HDMI output has a resolution that is not supported by the GPU. To use the monitor with full resolution I reduce the refresh rate to 38Hz with: $ xrandr --newmode "2560x1440_38.00" 189.75 2560 2712 2976 3392 1440 1443 1448 1474 -hsync +vsync $ xrandr --addmode HDMI3 "2560x1440_38.00" $ xrandr --output HDMI3 --mode "2560x1440_38.00" Why I think it is working with 3.14: - During the boot the VGA monitor is being detected as the primary while on 3.13 the one at HDMI port was being detected as primary. I never saw a text console on the high res monitor, it never worked.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> <li>You are on the CC list for the bug.</li> </ul> </body> </html>