<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - xf86-video-intel-2.99.917 should allow edid override to known edid.bin file for AVR+TV combinations" href="https://bugs.freedesktop.org/show_bug.cgi?id=89945#c17">Comment # 17</a> on <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - xf86-video-intel-2.99.917 should allow edid override to known edid.bin file for AVR+TV combinations" href="https://bugs.freedesktop.org/show_bug.cgi?id=89945">bug 89945</a> from <a class="email" href="mailto:lucas.oldfield@gmail.com" title="lucas oldfield <lucas.oldfield@gmail.com>"> lucas oldfield</a> <pre>Ok I've finally got a new TV up in my living room and time to try some of this debuggging.. it took a while to get everything built and installed but I finally got there tonight :) FYI the old hack was still working just fine. I can get the display to fail by just changing the TV from HDMI1 to HDMI2 when connected through the AVR. I've attached the log to the issue. lucas@tvbox:~$ sudo sh -c "echo '*********************************************************************' > /dev/kmsg" lucas@tvbox:~$ sudo service lightdm restart lucas@tvbox:~$ sudo sh -c "echo LIGHTDM IS UP ALL OK > /dev/kmsg" lucas@tvbox:~$ sudo sh -c "echo SWITCHING FROM HDMI1 to HDMI2 on TV > /dev/kmsg" lucas@tvbox:~$ sudo sh -c "echo HDMI2 enabled on TV.. as in NOT the input used from linux > /dev/kmsg" lucas@tvbox:~$ sudo sh -c "echo SWITCHING FROM HDMI2 to HDMI1 on TV > /dev/kmsg" lucas@tvbox:~$ sudo sh -c "echo HDMI1 enabled and TV is blank. no display! > /dev/kmsg" these are my text markers..</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> </ul> </body> </html>