[Intel-gfx] [ANNOUNCE] xf86-video-intel 188.8.131.521 (2.8.0 rc1)
ling.ma at intel.com
Thu Jun 11 15:48:21 CEST 2009
Your means is that When VGA is not plugged with your laptop, log file still shows VGA is connected in KMS?
>From: intel-gfx-bounces at lists.freedesktop.org
>[mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
>Sent: Thursday, June 11, 2009 6:42 PM
>To: Carl Worth; intel-gfx at lists.freedesktop.org
>Subject: Re: [Intel-gfx] [ANNOUNCE] xf86-video-intel
>184.108.40.2061 (2.8.0 rc1)
>I have an external VGA section in my xorg.conf:
> Identifier "VGA"
> HorizSync 24-92
> VertRefresh 43-60
> Option "Above" "LVDS"
> Option "Primary" "false"
> Option "Modes" "1280x1024 1024x768"
> Option "PreferredMode" "1280x1024"
>When starting X with VGA _unplugged_, KMS enables the VGA connector
>and xrandr extendes my desktop.
>(II) intel(0): Output VGA1 connected
>(II) intel(0): Output VGA1 using initial mode 1280x1024
>[drm] DAC-6: set mode 1280x1024 20
>And I still have lots of 'no EDID data' in kernel log for VGA1
>and LVDS1, too.
>I've attached my dmesg, xorg log with modedebug and xorg.conf.
>On Thu, Jun 11, 2009 at 12:42 AM, Carl Worth<cworth at cworth.org> wrote:
>> This is the first release candidate in preparation for the upcoming
>> 2.8.0 release. Most critical bugs should be fixed, but some major
>> bugs may still be present. We will appreciate any feedback we can
>> get from testing of this snapshot to improve the 2.8.0 release.
>> Some of the major fixes in this snapshot include:
>> * Several fixes for intermittent GPU hangs/crashes, (some of
>> which already appeared in the 2.7.1 release)
>> * Fix to avoid X crash when viewing large images in browser
>> * Fix X server failure when running old (non-GEM) kernel
>> * Fixes for SDVO LVDS mode detection
>> * Fix major performance regression of trapezoid rendering
>> compared to XAA/EXA
>> * New support for tear-free video when using KMS
>> * New support for tear-free DRI2 CopyRegion
>> * And many more...
>> How to get the release
>> git tag: 220.127.116.111
>> MD5: bd2052cb77094aaea76bf9d6e1ce8ce6
>> SHA1: 8c32e4cb54a739d98b9cdcf48355403350136712
>> MD5: 81184dcf98a035882a4f023bf50aa356
>> SHA1: f6b47ca218ae2b76392d619106d9b35a5e63cd7a
>> All changes from 18.104.22.168 to 22.214.171.1241
>> Adam Jackson (1):
>> Remove useless loader symbol lists.
>> Alan Coopersmith (1):
>> Fix "Unkown" typo in two FatalError messages
>> Arkadiusz Miśkiewicz (1):
>> Restore CFLAGS after tests.
>> Carl Worth (8):
>> Add doltlibtool to DISTCLEANFILES
>> RELEASING: Better instructions for where to send announcements
>> Use libdrm to lookup pipe for tear-free sync of XV
>> Revert "Rely on BO pixmaps being present in acceleration paths."
>> Rename i830_exa.c to i830_uxa.c
>> UXA: Rasterize trapezoids to system memory, not a pixmap
>> NEWS: Summarize new developments for 126.96.36.1991
>> Increment version to 188.8.131.521
>> Eric Anholt (9):
>> Remove dead "avail" variable from XAA stuff.
>> Only sync XV to vblank when drawing to the frontbuffer.
>> Don't do GTT maps on objects bigger than half the
>available aperture size.
>> Fix backwards logic on whether to sync to vblank or not.
>> Open the DRM and keep the handle throughout server
>startup to finish.
>> Fold GEM detection into DRM master open.
>> Replace some pixmap-related idioms with inline
>functions to do so.
>> Fix some drawable abuse in i830_dri.c
>> Fix segfault in DRI2 vblank syncing if the region isn't
>> Jesse Barnes (3):
>> Add new have_gem flag
>> Add --enable-debug flag to configure
>> Sync DRI2 CopyRegion to vertical retrace
>> Keith Packard (14):
>> Allow cursors to roam past 2048x2048 limit.
>> intel_batch_start_atomic: fix size passed to
>> Leave allocator running until lower-level CloseScreens are done
>> Don't bother to enable VF statistics during 965 video playback
>> 3D_STATE_VERTEX_BUFFERS takes four 32-bit values, not three.
>> Hold reference to video binding table until all rects
>> Revert "Leave allocator running until lower-level
>CloseScreens are done"
>> Call down to lower CloseScreen before shutting down DRM
>> Split i915 textured video commands to fit into batch buffers.
>> Fallback when VT inactive
>> Add DP link and GMCH M and N registers
>> Load i915 and fbcon when checking for KMS
>> If DRM can't figure out which pipe to sync on, then
>don't sync at all.
>> Use drm_intel_bo_disable_reuse API to flag scanout and
>> Kristian Høgsberg (2):
>> Only return FALSE when dri_bo_map() fails
>> Fall back to fb pixmaps for backing glyph pictures
>> Li Shao Hua (1):
>> switch XvMC to gem
>> Lukasz Kurylo (1):
>> DRI2 copyregion: don't wait for scanlines that won't happen
>> Ma Ling (4):
>> Set activation periods as 64 cdclk sync up with KMS
>> Wait doubled regis to be stable for load pipe detection
>> Fetch mode line from VBT, then keep it.
>> Provide mode line from VBT to xorg.
>> Stijn van Drongelen (1):
>> Fix typo in (unused) INTEL_BIOS_32 macro
>> Wu Fengguang (2):
>> Remove the offset parameter from i830_allocator_init()
>> README: kill an evil dot
>> Xiang Hai hao (1):
>> DRI2 for XvMC
>> Xiang, Haihao (1):
>> xvmc: don't include xf86dri.h
>> Zhenyu Wang (8):
>> xvmc: move 965 mc media programs to shader/mc directory
>> xvmc: add missed vld g4i sources in Makefile and fix distcheck
>> Add new chipsets PCI ids
>> Remove fixed MMIO size
>> Update intel_gtt utility for new chipset GTT check
>> Add new register definitions
>> Disable composite on new chipset for now
>> Add new chipset register dumps
>> Zou Nan hai (5):
>> XvMC VLD extension support for G4X
>> enable UV half pixel
>> enable MC on g45 for player without vld patch
>> add missing files for previous commit
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
More information about the Intel-gfx