[Intel-gfx] [PATCH 09/19] drm/i915: convert VGA driver to new encoder/connector structure

Zhenyu Wang zhenyuw at linux.intel.com
Tue Mar 30 08:39:32 CEST 2010


Signed-off-by: Zhenyu Wang <zhenyuw at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4dd5daa..1a89598 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -244,9 +244,9 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	return false;
 }
 
-static bool intel_crt_detect_ddc(struct drm_connector *connector)
+static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 
 	/* CRT should always be at 0, but check anyway */
 	if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
@@ -386,8 +386,8 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder
 static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
-	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
-	struct drm_encoder *encoder = &intel_encoder->enc;
+	struct drm_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct drm_crtc *crtc;
 	int dpms_mode;
 	enum drm_connector_status status;
@@ -399,7 +399,7 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto
 			return connector_status_disconnected;
 	}
 
-	if (intel_crt_detect_ddc(connector))
+	if (intel_crt_detect_ddc(encoder))
 		return connector_status_connected;
 
 	/* for pre-945g platforms use load detect */
@@ -421,9 +421,6 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto
 
 static void intel_crt_destroy(struct drm_connector *connector)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
-
-	intel_i2c_destroy(intel_encoder->ddc_bus);
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
 	kfree(connector);
@@ -432,7 +429,8 @@ static void intel_crt_destroy(struct drm_connector *connector)
 static int intel_crt_get_modes(struct drm_connector *connector)
 {
 	int ret;
-	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct drm_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct i2c_adapter *ddc_bus;
 	struct drm_device *dev = connector->dev;
 
@@ -488,12 +486,16 @@ static const struct drm_connector_funcs intel_crt_connector_funcs = {
 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 	.mode_valid = intel_crt_mode_valid,
 	.get_modes = intel_crt_get_modes,
-	.best_encoder = intel_best_encoder,
+	.best_encoder = intel_attached_encoder,
 };
 
 static void intel_crt_enc_destroy(struct drm_encoder *encoder)
 {
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+
+	intel_i2c_destroy(intel_encoder->ddc_bus);
 	drm_encoder_cleanup(encoder);
+	kfree(intel_encoder);
 }
 
 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
@@ -504,6 +506,7 @@ void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 i2c_reg;
 
@@ -511,14 +514,20 @@ void intel_crt_init(struct drm_device *dev)
 	if (!intel_encoder)
 		return;
 
-	connector = &intel_encoder->base;
-	drm_connector_init(dev, &intel_encoder->base,
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_encoder);
+		return;
+	}
+
+	connector = &intel_connector->base;
+	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
 	drm_encoder_init(dev, &intel_encoder->enc, &intel_crt_enc_funcs,
 			 DRM_MODE_ENCODER_DAC);
 
-	drm_mode_connector_attach_encoder(&intel_encoder->base,
+	drm_mode_connector_attach_encoder(&intel_connector->base,
 					  &intel_encoder->enc);
 
 	/* Set up the DDC bus. */
-- 
1.6.3.3




More information about the Intel-gfx mailing list