[Intel-gfx] [PATCH] drm/i915: remove unused variables from DP training

[Jesse Barnes]

Leftover from the training split, we don't need these guys anymore.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0daefca..0558e0a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1275,7 +1275,6 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
 	int i;
 	uint8_t voltage;
-	bool clock_recovery = false;
 	int tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
@@ -1298,7 +1297,6 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	memset(intel_dp->train_set, 0, 4);
 	voltage = 0xff;
 	tries = 0;
-	clock_recovery = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;
@@ -1324,10 +1322,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 		if (!intel_dp_get_link_status(intel_dp))
 			break;
 
-		if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
-			clock_recovery = true;
+		if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count))
 			break;
-		}
 
 		/* Check to see if we've tried the max voltage */
 		for (i = 0; i < intel_dp->lane_count; i++)
@@ -1357,7 +1353,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	bool channel_eq = false;
 	int tries, cr_tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
@@ -1365,7 +1360,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 	/* channel equalization */
 	tries = 0;
 	cr_tries = 0;
-	channel_eq = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;
@@ -1405,10 +1399,8 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			continue;
 		}
 
-		if (intel_channel_eq_ok(intel_dp)) {
-			channel_eq = true;
+		if (intel_channel_eq_ok(intel_dp))
 			break;
-		}
 
 		/* Try 5 times, then try clock recovery if that fails */
 		if (tries > 5) {