[Intel-gfx] [PATCH] drm/i915: Set the transcoder port to none when disabling DP.

[Eric Anholt]

The specs say to do so.

Signed-off-by: Eric Anholt <eric at anholt.net>
---

This patch is not actually tested, it was just left in my tree from
rebasing it around since its previous submission.  The change in this
version is that the NONE is actually the correct value (3, not 2).

 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 77b1530..3297cf1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3245,6 +3245,7 @@
 #define  TRANS_DP_PORT_SEL_B	(0<<29)
 #define  TRANS_DP_PORT_SEL_C	(1<<29)
 #define  TRANS_DP_PORT_SEL_D	(2<<29)
+#define  TRANS_DP_PORT_SEL_NONE	(3<<29)
 #define  TRANS_DP_PORT_SEL_MASK	(3<<29)
 #define  TRANS_DP_AUDIO_ONLY	(1<<26)
 #define  TRANS_DP_ENH_FRAMING	(1<<18)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e187257..6ff3788 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2818,6 +2818,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
+		temp |= TRANS_DP_PORT_SEL_NONE;
 		I915_WRITE(reg, temp);
 
 		/* disable DPLL_SEL */
-- 
1.7.2.3