[Intel-gfx] [PATCH 7/8] drm/i915: add PLL sharing support to handle 3 pipes
Jesse Barnes
jbarnes at virtuousgeek.org
Wed Oct 12 19:53:35 CEST 2011
Add two new fields to the intel_crtc struct for 3 pipe support: no_pll
and use_pll_a. The no_pll field is only set on the 3rd pipe to indicate
that it doesn't have a PLL of its own and so shouldn't try to write the
main PLL regs. The use_pll_a field controls which PLL pipe 3 will
share, A or B. The core code will try to share PLLs with whichever pipe
has the same timings, rejecting the mode set if none is found. This
means that pipe 3 must always be set after one of the other pipes has
been configured with real PLL settings.
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_display.c | 87 +++++++++++++++++++++-------------
drivers/gpu/drm/i915/intel_drv.h | 3 +
2 files changed, 57 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7835245..347a949 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2885,7 +2885,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp;
+ u32 reg, temp, transc_sel;
/* For PCH output, training FDI link */
dev_priv->display.fdi_link_train(crtc);
@@ -2893,6 +2893,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
intel_enable_pch_pll(dev_priv, pipe);
if (HAS_PCH_CPT(dev)) {
+ transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+ TRANSC_DPLLB_SEL;
+
/* Be sure PCH DPLL SEL is set */
temp = I915_READ(PCH_DPLL_SEL);
if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0)
@@ -2900,7 +2903,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0)
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
else if (pipe == 2 && (temp & TRANSC_DPLL_ENABLE) == 0)
- temp |= (TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
+ temp |= (TRANSC_DPLL_ENABLE | transc_sel);
I915_WRITE(PCH_DPLL_SEL, temp);
}
@@ -3072,8 +3075,8 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
break;
case 2:
- /* FIXME: manage transcoder PLLs? */
- temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
+ /* C shares PLL A or B */
+ temp &= ~(TRANSC_DPLL_ENABLE | TRANSB_DPLLB_SEL);
break;
default:
BUG(); /* wtf */
@@ -3082,7 +3085,8 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
}
/* disable PCH DPLL */
- intel_disable_pch_pll(dev_priv, pipe);
+ if (!intel_crtc->no_pll)
+ intel_disable_pch_pll(dev_priv, pipe);
/* Switch from PCDclk to Rawclk */
reg = FDI_RX_CTL(pipe);
@@ -5500,16 +5504,33 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
drm_mode_debug_printmodeline(mode);
/* PCH eDP needs FDI, but CPU eDP does not */
- if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (!intel_crtc->no_pll &&
+ (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
I915_WRITE(PCH_FP0(pipe), fp);
I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
POSTING_READ(PCH_DPLL(pipe));
udelay(150);
+ } else {
+ if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(0))) {
+ intel_crtc->use_pll_a = true;
+ DRM_DEBUG_KMS("using pipe a dpll\n");
+ } else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(1))) {
+ intel_crtc->use_pll_a = false;
+ DRM_DEBUG_KMS("using pipe b dpll\n");
+ } else {
+ DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
+ return -EINVAL;
+ }
}
/* enable transcoder DPLL */
if (HAS_PCH_CPT(dev)) {
+ u32 transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+ TRANSC_DPLLB_SEL;
temp = I915_READ(PCH_DPLL_SEL);
switch (pipe) {
case 0:
@@ -5519,8 +5540,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL;
break;
case 2:
- /* FIXME: manage transcoder PLLs? */
- temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL;
+ temp |= TRANSC_DPLL_ENABLE | transc_sel;
break;
default:
BUG();
@@ -5538,17 +5558,13 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
if (is_lvds) {
temp = I915_READ(PCH_LVDS);
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- if (HAS_PCH_CPT(dev))
- temp |= PORT_TRANS_B_SEL_CPT;
- else
- temp |= LVDS_PIPEB_SELECT;
- } else {
- if (HAS_PCH_CPT(dev))
- temp &= ~PORT_TRANS_SEL_MASK;
- else
- temp &= ~LVDS_PIPEB_SELECT;
- }
+ if (HAS_PCH_CPT(dev))
+ temp |= PORT_TRANS_SEL_CPT(pipe);
+ else if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+
/* set the corresponsding LVDS_BORDER bit */
temp |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
@@ -5598,8 +5614,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(TRANSDPLINK_N1(pipe), 0);
}
- if (!has_edp_encoder ||
- intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (!intel_crtc->no_pll &&
+ (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
I915_WRITE(PCH_DPLL(pipe), dpll);
/* Wait for the clocks to stabilize. */
@@ -5615,18 +5632,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
intel_crtc->lowfreq_avail = false;
- if (is_lvds && has_reduced_clock && i915_powersave) {
- I915_WRITE(PCH_FP1(pipe), fp2);
- intel_crtc->lowfreq_avail = true;
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("enabling CxSR downclocking\n");
- pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
- }
- } else {
- I915_WRITE(PCH_FP1(pipe), fp);
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("disabling CxSR downclocking\n");
- pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ if (!intel_crtc->no_pll) {
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(PCH_FP1(pipe), fp2);
+ intel_crtc->lowfreq_avail = true;
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+ pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+ }
+ } else {
+ I915_WRITE(PCH_FP1(pipe), fp);
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+ pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ }
}
}
@@ -7242,6 +7261,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
intel_crtc->bpp = 24; /* default for pre-Ironlake */
if (HAS_PCH_SPLIT(dev)) {
+ if (pipe == 2 && IS_IVYBRIDGE(dev))
+ intel_crtc->no_pll = true;
intel_helper_funcs.prepare = ironlake_crtc_prepare;
intel_helper_funcs.commit = ironlake_crtc_commit;
} else {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index b7e7186..8da74d2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -171,6 +171,9 @@ struct intel_crtc {
int16_t cursor_width, cursor_height;
bool cursor_visible;
unsigned int bpp;
+
+ bool no_pll; /* tertiary pipe for IVB */
+ bool use_pll_a;
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
--
1.7.4.1
More information about the Intel-gfx
mailing list