[Intel-gfx] Flicker-free boot in DRM
keithp at keithp.com
Sat Oct 29 00:05:22 PDT 2011
Steve Langasek came over today and we hacked on the i915 driver
initialization code to try and avoid the initial mode set. I thought I'd
summarize what we found out.
* Ubuntu has hacked up grub2 so that it gets the boot monitor running
in a reasonable configuration using VBE calls if possible. In
particular, it does try to find a 32bpp mode.
Unfortunately, this won't actually work on many machines as the BIOS
is often missing the native mode for the panel. So, we'll often need to
deal with situations where the BIOS has got the panel running in the
right mode, but there's a scaler running and the pipe and plane are
wrong. I wonder if it's possible to change the plane/pipe/scaler
configuration without turning the panel off and without causing any
visible artifacts on the screen. My (limited) testing generated
quite the visual fireworks...
* Would UEFI do any better? It does provide a native mode on my MBA,
it would be nice to know if this is at all common on regular PC
hardware that has UEFI support.
* I've got LVDS pulling the current mode out of the hardware, and
nearly have eDP doing the same. eDP is a bit harder because
computing the nominal pixel clock from the hw clock and M/N ratios
is harder than just pulling the PLL values out.
* Constructing a fake drm_framebuffer is a pain; there are a million
places that assume all kinds of things about the frame buffer on
* DRM destroys all references to the current mode before crtc->mode_set is
called. This makes it impossible to short-circuit pieces of mode_set
internally. There's absolutely no reason for this; all of the
changed data are available as parameters to the underlying functions.
* drm should let the driver decide whether mode_set_base will work
to switch frame buffers. Otherwise, there are all kinds of cases
which the hardware supports and which it will refuse to let through.
I think it should return -EAGAIN or some such to signal that the
system should try to do a full mode set.
I'll try changing the interface to mode_set_base and see how much
further I get. All of the preliminary patches I've done are on my
panel-takeover branch on git://people.freedesktop.org/~keithp/linux
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 827 bytes
Desc: not available
More information about the Intel-gfx