[Intel-gfx] [PATCH 20/29] drm/i915: do not use old code paths on Haswell

Eugeni Dodonov eugeni.dodonov at intel.com
Fri Apr 13 22:08:56 CEST 2012


Haswell has a different way of accessing pipes and PCH-specific registers,
so avoid using legacy registers on it.

This patch will probably be reworked into a series of smaller patches once
the required plumbing lands and we won't hit those assertions anymore.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c |   59 +++++++++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 712bbaa..a1598a5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -949,9 +949,16 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 	u32 val;
 	bool cur_state;
 
-	reg = FDI_TX_CTL(pipe);
-	val = I915_READ(reg);
-	cur_state = !!(val & FDI_TX_ENABLE);
+	if (IS_HASWELL(dev_priv->dev)) {
+		DRM_ERROR("Attempting to check FDI_TX_CTL on Haswell, using DDI instead\n");
+		reg = DDI_FUNC_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & PIPE_DDI_FUNC_ENABLE);
+	} else {
+		reg = FDI_TX_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & FDI_TX_ENABLE);
+	}
 	WARN(cur_state != state,
 	     "FDI TX state assertion failure (expected %s, current %s)\n",
 	     state_string(state), state_string(cur_state));
@@ -966,9 +973,14 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
 	u32 val;
 	bool cur_state;
 
-	reg = FDI_RX_CTL(pipe);
-	val = I915_READ(reg);
-	cur_state = !!(val & FDI_RX_ENABLE);
+	if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
+			DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n");
+			return;
+	} else {
+		reg = FDI_RX_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & FDI_RX_ENABLE);
+	}
 	WARN(cur_state != state,
 	     "FDI RX state assertion failure (expected %s, current %s)\n",
 	     state_string(state), state_string(cur_state));
@@ -986,6 +998,11 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 	if (dev_priv->info->gen == 5)
 		return;
 
+	if (IS_HASWELL(dev_priv->dev)) {
+		DRM_ERROR("Attempting to check FDI_TX_PLL on Haswell, aborting\n");
+		return;
+	}
+
 	reg = FDI_TX_CTL(pipe);
 	val = I915_READ(reg);
 	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
@@ -997,6 +1014,10 @@ static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
 	int reg;
 	u32 val;
 
+	if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
+		DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n");
+		return;
+	}
 	reg = FDI_RX_CTL(pipe);
 	val = I915_READ(reg);
 	WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
@@ -1102,6 +1123,11 @@ static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
 	u32 val;
 	bool enabled;
 
+	if (HAS_PCH_LPT(dev_priv->dev)) {
+		DRM_ERROR("LPT does not has PCH refclk, skipping check\n");
+		return;
+	}
+
 	val = I915_READ(PCH_DREF_CONTROL);
 	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
 			    DREF_SUPERSPREAD_SOURCE_MASK));
@@ -1445,6 +1471,10 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
 	assert_fdi_tx_enabled(dev_priv, pipe);
 	assert_fdi_rx_enabled(dev_priv, pipe);
 
+	if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
+		DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n");
+		return;
+	}
 	reg = TRANSCONF(pipe);
 	val = I915_READ(reg);
 	pipeconf_val = I915_READ(PIPECONF(pipe));
@@ -2971,13 +3001,18 @@ static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
 	udelay(200);
 
 	/* Enable CPU FDI TX PLL, always on for Ironlake */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+	if (IS_HASWELL(dev)) {
+		DRM_ERROR("Skipping enablement of FDI_TX_PLL on Haswell\n");
+		return;
+	} else {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+			I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
 
-		POSTING_READ(reg);
-		udelay(100);
+			POSTING_READ(reg);
+			udelay(100);
+		}
 	}
 }
 
-- 
1.7.10




More information about the Intel-gfx mailing list