[Intel-gfx] [PATCH-v2 0/3] drm/i915: interlaced mode support
jbarnes at virtuousgeek.org
Wed Jan 18 08:42:07 PST 2012
On Thu, 19 Jan 2012 00:29:23 +1100
Peter Ross <pross at xvid.org> wrote:
> This patch set enables enables interlaced mode output on
> generation 3 and above chipsets.
> History here: https://bugs.freedesktop.org/show_bug.cgi?id=11220
> It has been tested on the following hardware:
> * ASUS P5E-VM-HDMI (G35_G) and LG 32FS4D (VGA and SDVO connectors)
> * Intel DQ45CB (Q45_G) and Sony GDM 5411 (VGA connector)
> * Toshiba Portege R500 (I935_GM) and Sony GDM 5411 CRT (VGA connector)
> PATCH HISTORY
> Version 1. Initial cut.
> Version 2. Set timings for gen3 and ILK/SB chipsets.
> Allow interlaced output on HDMI connector.
> Peter Ross (3):
> drm/i915: specify vertical timings in frame units for interlaced
> modes (gen3+)
> drm/i915: allow interlaced mode output on the SDVO connector
> drm/i915: allow interlaced mode output on the HDMI connector
> drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++++
> drivers/gpu/drm/i915/intel_hdmi.c | 2 +-
> drivers/gpu/drm/i915/intel_sdvo.c | 2 +-
> 3 files changed, 16 insertions(+), 2 deletions(-)
Cool, this series looks good.
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Yi, can you give these patches a try with interlaced modes on SDVO and
HDMI attached displays and reply with your tested-by?
Jesse Barnes, Intel Open Source Technology Center
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 836 bytes
Desc: not available
More information about the Intel-gfx