[Intel-gfx] [PATCH] drm/i915: kick any firmware framebuffers before claiming the gtt

Daniel Vetter daniel.vetter at ffwll.ch
Sun Jul 1 17:09:42 CEST 2012


Especially vesafb likes to map everything as uc- (yikes), and if that
mapping hangs around still while we try to map the gtt as wc the
kernel will downgrade our request to uc-, resulting in abyssal
performance.

Unfortunately we can't do this as early as readon does (i.e. as the
first thing we do when initializing the hw) because our fb/mmio space
region moves around on a per-gen basis. So I've had to move it below
the gtt initialization, but that seems to work, too. The important
thing is that we do this before we set up the gtt wc mapping.

Now an altogether different question is why people compile their
kernels with vesafb enabled, but I guess making things just work isn't
bad per se ...

v2:
- s/radeondrmfb/inteldrmfb/
- fix up error handling

v3: Kill #ifdef X86, this is Intel after all. Noticed by Ben Widawsky.

v4: Jani Nikula complained about the pointless bool primary
initialization.

v5: Don't oops if we can't allocate, noticed by Chris Wilson.

v6: Resolve conflicts with agp rework and fixup whitespace.

This is commit e188719a2891f01b3100d in drm-next.

Backport to 3.5 -fixes queue requested by Dave Airlie - due to grub
using vesa on fedora their initrd seems to load vesafb before loading
the real kms driver. So tons more people actually experience a
dead-slow gpu. Hence also the Cc: stable.

Cc: Dave Airlie <airlied at linux.ie>
Cc: stable at vger.kernel.org
Reported-and-tested-by: "Kilarski, Bernard R" <bernard.r.kilarski at intel.com>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c |   37 ++++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f947926..36822b9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1401,6 +1401,27 @@ i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base,
 	}
 }
 
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	struct apertures_struct *ap;
+	struct pci_dev *pdev = dev_priv->dev->pdev;
+	bool primary;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return;
+
+	ap->ranges[0].base = dev_priv->dev->agp->base;
+	ap->ranges[0].size =
+		dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+	primary =
+		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+	remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+	kfree(ap);
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1446,6 +1467,15 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		goto free_priv;
 	}
 
+	dev_priv->mm.gtt = intel_gtt_get();
+	if (!dev_priv->mm.gtt) {
+		DRM_ERROR("Failed to initialize GTT\n");
+		ret = -ENODEV;
+		goto put_bridge;
+	}
+
+	i915_kick_out_firmware_fb(dev_priv);
+
 	pci_set_master(dev->pdev);
 
 	/* overlay on gen2 is broken and can't address above 1G */
@@ -1471,13 +1501,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		goto put_bridge;
 	}
 
-	dev_priv->mm.gtt = intel_gtt_get();
-	if (!dev_priv->mm.gtt) {
-		DRM_ERROR("Failed to initialize GTT\n");
-		ret = -ENODEV;
-		goto out_rmmap;
-	}
-
 	aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
 
 	dev_priv->mm.gtt_mapping =
-- 
1.7.10




More information about the Intel-gfx mailing list