[Intel-gfx] [PATCH 05/25] drm/i915: add DPIO read/write functions for ValleyView
Jesse Barnes
jbarnes at virtuousgeek.org
Wed Mar 21 20:48:26 CET 2012
ValleyView and similar hardware (like CedarView) put some display
related registers like the PLL controls and dividers on a DPIO bus. Add
simple indirect register access routines to get to those registers.
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/i915_drv.h | 4 ++
drivers/gpu/drm/i915/i915_reg.h | 55 ++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 76 ++++++++++++++++++++++++++++++++++
3 files changed, 135 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 83ace70..0294330 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -354,6 +354,10 @@ typedef struct drm_i915_private {
/* protects the irq masks */
spinlock_t irq_lock;
+
+ /* DPIO indirect register protection */
+ spinlock_t dpio_lock;
+
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 pipestat[2];
u32 irq_mask;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index af5cd25..ad6b5e0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -301,6 +301,61 @@
#define DEBUG_RESET_RENDER (1<<8)
#define DEBUG_RESET_DISPLAY (1<<9)
+/*
+ * DPIO - a special bus for various display related registers to hide behind:
+ * 0x800c: m1, m2, n, p1, p2, k dividers
+ * 0x8014: REF and SFR select
+ * 0x8014: N divider, VCO select
+ * 0x801c/3c: core clock bits
+ * 0x8048/68: low pass filter coefficients
+ * 0x8100: fast clock controls
+ */
+#define DPIO_PKT 0x2100
+#define DPIO_RID (0<<24)
+#define DPIO_OP_WRITE (1<<16)
+#define DPIO_OP_READ (0<<16)
+#define DPIO_PORTID (0x12<<8)
+#define DPIO_BYTE (0xf<<4)
+#define DPIO_BUSY (1<<0) /* status only */
+#define DPIO_DATA 0x2104
+#define DPIO_REG 0x2108
+#define DPIO_CTL 0x2110
+#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
+#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
+#define DPIO_SFR_BYPASS (1<<1)
+#define DPIO_RESET (1<<0)
+
+#define _DPIO_DIV_A 0x800c
+#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */
+#define DPIO_K_SHIFT (24) /* 4 bits */
+#define DPIO_P1_SHIFT (21) /* 3 bits */
+#define DPIO_P2_SHIFT (16) /* 5 bits */
+#define DPIO_N_SHIFT (12) /* 4 bits */
+#define DPIO_ENABLE_CALIBRATION (1<<11)
+#define DPIO_M1DIV_SHIFT (8) /* 3 bits */
+#define DPIO_M2DIV_MASK 0xff
+#define _DPIO_DIV_B 0x802c
+#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B)
+
+#define _DPIO_REFSFR_A 0x8014
+#define DPIO_REFSEL_OVERRIDE 27
+#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */
+#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */
+#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */
+#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */
+#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */
+#define _DPIO_REFSFR_B 0x8034
+#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B)
+
+#define _DPIO_CORE_CLK_A 0x801c
+#define _DPIO_CORE_CLK_B 0x803c
+#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B)
+
+#define _DPIO_LFP_COEFF_A 0x8048
+#define _DPIO_LFP_COEFF_B 0x8068
+#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B)
+
+#define DPIO_FASTCLK_DISABLE 0x8100
/*
* Fence registers
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index de1ba19..b8daeef 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -360,6 +360,79 @@ static const intel_limit_t intel_limits_ironlake_display_port = {
.find_pll = intel_find_pll_ironlake_dp,
};
+#define wait_for_atomic_us(COND, US) ({ \
+ int i, ret__ = -ETIMEDOUT; \
+ for (i = 0; i < (US); i++) { \
+ if ((COND)) { \
+ ret__ = 0; \
+ break; \
+ } \
+ udelay(1); \
+ } \
+ ret__; \
+})
+
+#if 0
+static u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
+{
+ unsigned long flags;
+ u32 val = 0;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO read wait timed out\n");
+ goto out_unlock;
+ }
+ val = I915_READ(DPIO_DATA);
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+ return val;
+}
+#endif
+
+static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
+ u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_DATA, val);
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
+ DRM_ERROR("DPIO write wait timed out\n");
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+}
+
+static void vlv_init_dpio(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Reset the DPIO config */
+ I915_WRITE(DPIO_CTL, 0);
+ POSTING_READ(DPIO_CTL);
+ I915_WRITE(DPIO_CTL, 1);
+ POSTING_READ(DPIO_CTL);
+}
+
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
int refclk)
{
@@ -9187,6 +9260,9 @@ void intel_modeset_cleanup(struct drm_device *dev)
if (IS_IRONLAKE_M(dev))
ironlake_disable_rc6(dev);
+ if (IS_VALLEYVIEW(dev))
+ vlv_init_dpio(dev);
+
mutex_unlock(&dev->struct_mutex);
/* Disable the irq before mode object teardown, for the irq might
--
1.7.5.4
More information about the Intel-gfx
mailing list