May 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue May 1 03:47:06 PDT 2012
Ending: Thu May 31 23:53:18 PDT 2012
Messages: 713

• [Intel-gfx] [ANNOUNCE] xf86-video-intel 2.19.0 [resend]   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Only enable IPS polling for gen5   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: Only enable IPS polling for gen5   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Only enable IPS polling for gen5   Daniel Vetter
  • [Intel-gfx] [PATCH 19/24] drm/i915: detect digital outputs on Haswell   Jesse Barnes
    • [Intel-gfx] [PATCH 19/24] drm/i915: detect digital outputs on Haswell   Keith Packard
• [Intel-gfx] [PATCH 4/5] drm/i915: wait render timeout ioctl   Eric Anholt
  • [Intel-gfx] [PATCH 4/5] drm/i915: wait render timeout ioctl   Ben Widawsky
• [Intel-gfx] [PATCH 1/2] drm/i915: time out of load detect busy-waits   Daniel Vetter
• [Intel-gfx] [PATCH 13/28] drm/i915: Avoid clearing preallocated regions from the GTT   Daniel Vetter
  • [Intel-gfx] [PATCH 13/28] drm/i915: Avoid clearing preallocated regions from the GTT   Chris Wilson
• [Intel-gfx] [PATCH] drm/i915: Remove unused ring->irq_seqno   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: Remove unused dev_priv->vblank_pipe   Daniel Vetter
• [Intel-gfx] [PATCH 2/5] drm/i915: Dynamic Parity Detection handling   Daniel Vetter
• [Intel-gfx] [PATCH 5/5] drm/i915: l3 parity sysfs interface   Daniel Vetter
  • [Intel-gfx] [PATCH 5/5] drm/i915: l3 parity sysfs interface   Ben Widawsky
    • [Intel-gfx] [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB   Chris Wilson
    • [Intel-gfx] [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler   Chris Wilson
    • [Intel-gfx] [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler   Daniel Vetter
    • [Intel-gfx] [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler   Chris Wilson
    • [Intel-gfx] [PATCH 1/2] drm/i915: Avoid a double-read of PCH_IIR during interrupt handling   Chris Wilson
    • [Intel-gfx] [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB   Jesse Barnes
    • [Intel-gfx] [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB   Daniel Vetter
    • [Intel-gfx] [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: rip out intel_dpio_write again   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Do not read non-existent DPLL registers on PCH hardware   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Do not read non-existent DPLL registers on PCH hardware   Daniel Vetter
• [Intel-gfx] [PATCH 00/17] dri1 dragon slaughtering, v2   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915/overlay: Fully configure overlay before turning on   Daniel Vetter
• [Intel-gfx] [PATCH 01/10] drm/i915: add interface to simulate gpu hangs   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix gen4 gpu reset   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix gen4 gpu reset   Kenneth Graunke
  • [Intel-gfx] [PATCH] drm/i915: fix gen4 gpu reset   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix gen4 gpu reset   Eugeni Dodonov
  • [Intel-gfx] [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs   Ben Widawsky
  • [Intel-gfx] [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs   Daniel Vetter
• [Intel-gfx] HDMI problems when using a A/V receiver   linux at clnt.de
• [Intel-gfx] HDMI problems when using a A/V receiver   linux at clnt.de
• [Intel-gfx] [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation   Daniel Vetter
• [Intel-gfx] [PATCH 3/5 v2] drm/i915: extract some common olr+wedge code   Daniel Vetter
• [Intel-gfx] [PATCH 2/5] drm/i915: make waiting trace events more useful   Daniel Vetter
  • [Intel-gfx] [PATCH 2/5] drm/i915: make waiting trace events more useful   Chris Wilson
    • [Intel-gfx] [PATCH 2/5] drm/i915: make waiting trace events more useful   Daniel Vetter
    • [Intel-gfx] [PATCH 2/5] drm/i915: make waiting trace events more useful   Daniel Vetter
• [Intel-gfx] [PATCH 4/5] drm/i915: wait render timeout ioctl   Daniel Vetter
• [Intel-gfx] [PATCH 1/5] drm/i915: timeout parameter for seqno wait   Daniel Vetter
  • [Intel-gfx] [PATCH 1/5] drm/i915: timeout parameter for seqno wait   Ben Widawsky
    • [Intel-gfx] [PATCH 01/12] drm/i915: enable dip before writing data on gen4   Paulo Zanoni
    • [Intel-gfx] [PATCH 02/12] drm/i915: DSL_LINEMASK is 12 bits only on gen2   Paulo Zanoni
    • [Intel-gfx] [PATCH 02/12] drm/i915: DSL_LINEMASK is 12 bits only on gen2   Chris Wilson
    • [Intel-gfx] [PATCH 03/12] drm/i915: implement ironlake_wait_for_vblank   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/12] drm/i915: implement ironlake_wait_for_vblank   Chris Wilson
    • [Intel-gfx] [PATCH 04/12] drm/i915: touch the DIP control register after enabling the HDMI port   Paulo Zanoni
    • [Intel-gfx] [PATCH 05/12] drm/i915: change coding style of the write_infoframe functions   Paulo Zanoni
    • [Intel-gfx] [PATCH 06/12] drm/i915: start writing infoframes at address 0 on gen 4   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/12] drm/i915: mask the video DIP port select   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/12] drm/i915: mask the video DIP port select   Eugeni Dodonov
    • [Intel-gfx] [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index   Paulo Zanoni
    • [Intel-gfx] [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index   Eugeni Dodonov
    • [Intel-gfx] [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index   Paulo Zanoni
    • [Intel-gfx] [PATCH 09/12] drm/i915: disable the infoframe before changing it   Paulo Zanoni
    • [Intel-gfx] [PATCH 09/12] drm/i915: disable the infoframe before changing it   Eugeni Dodonov
    • [Intel-gfx] [PATCH 10/12] drm/i915: mask the video DIP frequency when changing it   Paulo Zanoni
    • [Intel-gfx] [PATCH 10/12] drm/i915: mask the video DIP frequency when changing it   Eugeni Dodonov
    • [Intel-gfx] [PATCH 11/12] drm/i915: split ironlake_write_infoframe into ibx_ and cpt_   Paulo Zanoni
    • [Intel-gfx] [PATCH 12/12] drm/i915: simplify intel_encoder_commit   Paulo Zanoni
    • [Intel-gfx] [PATCH 01/12] drm/i915: enable dip before writing data on gen4   Daniel Vetter
    • [Intel-gfx] [PATCH 01/12] drm/i915: enable dip before writing data on gen4   Eugeni Dodonov
    • [Intel-gfx] [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank   Daniel Vetter
    • [Intel-gfx] [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank   Daniel Vetter
    • [Intel-gfx] [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank   Daniel Vetter
    • [Intel-gfx] [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port   Paulo Zanoni
    • [Intel-gfx] [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port   Daniel Vetter
    • [Intel-gfx] [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port   Daniel Vetter
    • [Intel-gfx] [PATCH 05/14] drm/i915: change coding style of the write_infoframe functions   Paulo Zanoni
    • [Intel-gfx] [PATCH 06/14] drm/i915: start writing infoframes at address 0 on gen 4   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/14] drm/i915: mask the video DIP port select   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/14] drm/i915: mask the video DIP port select   Daniel Vetter
    • [Intel-gfx] [PATCH 08/14] drm/i915: break intel_infoframe_flags into _enable and _frequency   Paulo Zanoni
    • [Intel-gfx] [PATCH 08/14] drm/i915: break intel_infoframe_flags into _enable and _frequency   Daniel Vetter
    • [Intel-gfx] [PATCH 09/14] drm/i915: disable the infoframe before changing it   Paulo Zanoni
    • [Intel-gfx] [PATCH 10/14] drm/i915: mask the video DIP frequency when changing it   Paulo Zanoni
    • [Intel-gfx] [PATCH 11/14] drm/i915: simplify intel_encoder_commit   Paulo Zanoni
    • [Intel-gfx] [PATCH 12/14] drm/i915: split ironlake_write_infoframe into ibx_ and cpt_   Paulo Zanoni
    • [Intel-gfx] [PATCH 13/14] drm/i915: ibx_write_infoframe can disable AVI   Paulo Zanoni
    • [Intel-gfx] [PATCH 13/14] drm/i915: ibx_write_infoframe can disable AVI   Daniel Vetter
    • [Intel-gfx] [PATCH 14/14] drm/i915: set the DIP port on ibx_write_infoframe   Paulo Zanoni
    • [Intel-gfx] [PATCH 14/14] drm/i915: set the DIP port on ibx_write_infoframe   Daniel Vetter
    • [Intel-gfx] [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2   Daniel Vetter
    • [Intel-gfx] [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2   Daniel Vetter
  • [Intel-gfx] [PATCH 00/12] Infoframe fixes   Paulo Zanoni
    • [Intel-gfx] [PATCH 00/12] Infoframe fixes   Paulo Zanoni
      • [Intel-gfx] [PATCH 00/12] Infoframe fixes   Peter Ross
• [Intel-gfx] [PATCH 0/5 v3] timed BO wait   Ben Widawsky
  • [Intel-gfx] [PATCH 1/2] seqno   Chris Wilson
  • [Intel-gfx] [PATCH 2/2] drm/i915: Avoid concurrent access when marking the device as idle/busy   Chris Wilson
  • [Intel-gfx] [PATCH 1/2] seqno   Chris Wilson
  • [Intel-gfx] [PATCH 1/2] drm/i915: Avoid concurrent access when marking the device as idle/busy   Chris Wilson
  • [Intel-gfx] [PATCH 1/2] drm/i915: Avoid concurrent access when marking the device as idle/busy   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Avoid concurrent access when marking the device as idle/busy   Chris Wilson
  • [Intel-gfx] [PATCH 2/2] drm/i915: Limit calling mark-busy only for potential scanouts   Chris Wilson
  • [Intel-gfx] [PATCH 2/2] drm/i915: Limit calling mark-busy only for potential scanouts   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Limit calling mark-busy only for potential scanouts   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Limit calling mark-busy only for potential scanouts   Daniel Vetter
• [Intel-gfx] NM10 chipset with GMA3600   lbg_147 at bluebottle.com
  • [Intel-gfx] NM10 chipset with GMA3600   Zhenyu Wang
    • [Intel-gfx] [PATCH] drm/i915: add interface to simulate gpu hangs   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: add interface to simulate gpu hangs   Eugeni Dodonov
    • [Intel-gfx] [PATCH] drm/i915: add interface to simulate gpu hangs   Daniel Vetter
  • [Intel-gfx] [3.4-rc5, SNB] transaction abort when suspending   Daniel J Blueman
    • [Intel-gfx] [3.4-rc5, SNB] transaction abort when suspending   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: Periodically sanity check power management   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Periodically sanity check power management   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Periodically sanity check power management   Daniel Vetter
• [Intel-gfx] [PULL] drm-intel-fixes   Daniel Vetter
• [Intel-gfx] g33 + dual head = problems   Andriy Gapon
  • [Intel-gfx] g33 + dual head = problems   Adam Jackson
    • [Intel-gfx] g33 + dual head = problems   Chris Wilson
    • [Intel-gfx] g33 + dual head = problems   Andriy Gapon
• [Intel-gfx] Tearing video on Sandy Bridge   tino.keitel+xorg at tikei.de
  • [Intel-gfx] Tearing video on Sandy Bridge   Daniel Vetter
    • [Intel-gfx] Tearing video on Sandy Bridge   Tino Keitel
      • [Intel-gfx] Tearing video on Sandy Bridge   Daniel Vetter
      • [Intel-gfx] Tearing video on Sandy Bridge   tino.keitel+xorg at tikei.de
      • [Intel-gfx] Tearing video on Sandy Bridge   Chun-Yu Shei
      • [Intel-gfx] Tearing video on Sandy Bridge   tino.keitel+xorg at tikei.de
      • [Intel-gfx] Tearing video on Sandy Bridge   Tino Keitel
      • [Intel-gfx] [PATCH] drm/i915: disable sdvo hotplug on i945g/gm   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: disable sdvo hotplug on i945g/gm   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: disable sdvo hotplug on i945g/gm   Daniel Vetter
• [Intel-gfx] [PATCH 1/2] drm/i915: use mode values consistently when converting to sdvo dtd   Daniel Vetter
• [Intel-gfx] [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed   Daniel Vetter
  • [Intel-gfx] [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed   Eugeni Dodonov
    • [Intel-gfx] [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed   Daniel Vetter
• [Intel-gfx] [PATCH 07/10] drm/i915: kill flags parameter for reset functions   Eugeni Dodonov
• [Intel-gfx] [PATCH 06/10] drm/i915: make gpu hangman more resilient   Eugeni Dodonov
• [Intel-gfx] [PATCH 04/10] drm/i915: simplify i915_reset a bit   Eugeni Dodonov
• [Intel-gfx] [PATCH 05/10] drm/i915: extract intel_gpu_reset   Eugeni Dodonov
• [Intel-gfx] [PATCH 02/10] drm/i915: rework dev->first_error locking   Eugeni Dodonov
• [Intel-gfx] [RFC] Reduce idle vblank wakeups   Matthew Garrett
  • [Intel-gfx] [PATCH 03/12 v2] drm/i915: move vbetool invoked ier stuff   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Eric Anholt
    • [Intel-gfx] [PATCH] drm/i915: set IDICOS to medium uncore resources   Ben Widawsky
• [Intel-gfx] blank screen FUJITSU LIFEBOOK S760   Babar Haq
  • [Intel-gfx] blank screen FUJITSU LIFEBOOK S760   Daniel Vetter
    • [Intel-gfx] blank screen FUJITSU LIFEBOOK S760   Alexander E. Patrakov
• [Intel-gfx] [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+   Daniel Vetter
• [Intel-gfx] Updated -next   Daniel Vetter
  • [Intel-gfx] [PULL] drm-intel-next   Daniel Vetter
• [Intel-gfx] [PULL] drm-intel-fixes   Daniel Vetter
• [Intel-gfx] [PULL] drm-intel-next manual merge   Daniel Vetter
• [Intel-gfx] blank screen FUJITSU LIFEBOOK S760   Babar Haq
  • [Intel-gfx] [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.   Paul Berry
  • [Intel-gfx] [PATCH 2/2] configure: Bump version for 2.4.34.   Paul Berry
  • [Intel-gfx] [PATCH 2/2] configure: Bump version for 2.4.34.   Eric Anholt
  • [Intel-gfx] [PATCH 2/2] configure: Bump version for 2.4.34.   Paul Berry
  • [Intel-gfx] [PATCH 2/2] configure: Bump version for 2.4.34.   Eric Anholt
  • [Intel-gfx] [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.   Eric Anholt
  • [Intel-gfx] [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.   Paul Berry
  • [Intel-gfx] [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.   Eric Anholt
  • [Intel-gfx] [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter   Daniel Vetter
  • [Intel-gfx] [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter   Dave Airlie
  • [Intel-gfx] [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter   Daniel Vetter
  • [Intel-gfx] [PATCH 1/3] drm/i915: replace intel_infoframe_freq with VIDEO_DIP_FREQ_VSYNC   Daniel Vetter
  • [Intel-gfx] [PATCH 2/3] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function   Daniel Vetter
  • [Intel-gfx] [PATCH 2/3] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function   Daniel Vetter
  • [Intel-gfx] [PATCH 3/3] drm/i915: s/intel_infoframe/gm45_infoframe   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: s/intel_infoframe/gm45_infoframe   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: s/intel_infoframe/gm45_infoframe   Daniel Vetter
  • [Intel-gfx] [PATCH] tools: add Haswell registers into intel_reg_dumper   Eugeni Dodonov
  • [Intel-gfx] [PATCH] tools: add Haswell registers into intel_reg_dumper   Daniel Vetter
  • [Intel-gfx] [PATCH] [RFC] sched/drm: add infrastructure for gpu waits   Daniel Vetter
  • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   iyshwarya
    • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   Sateesh Kavuri
      • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   Sateesh Kavuri
      • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   Daniel Vetter
  • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   Engineer
    • [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android   Purushothaman, Vijay A
      • [Intel-gfx] [PATCH 00/25] Haswell fixes   Eugeni Dodonov
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Eugeni Dodonov
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Paulo Zanoni
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Eugeni Dodonov
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Paulo Zanoni
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Daniel Vetter
      • [Intel-gfx] [PATCH 01/25] drm/i915: add new Haswell DIP controls registers   Eugeni Dodonov
      • [Intel-gfx] [PATCH 02/25] drm/i915: reuse Ivy Bridge interrupts code for Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 03/25] drm/i915: add support for SBI ops   Eugeni Dodonov
      • [Intel-gfx] [PATCH 04/25] drm/i915: calculate watermarks for devices that have 3 pipes   Eugeni Dodonov
      • [Intel-gfx] [PATCH 05/25] drm/i915: properly check for pipe count   Eugeni Dodonov
      • [Intel-gfx] [PATCH 06/25] drm/i915: show unknown sdvox registers on hdmi init   Eugeni Dodonov
      • [Intel-gfx] [PATCH 07/25] drm/i915: do not use fdi_normal_train on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 08/25] drm/i915: detect PCH encoders on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 08/25] drm/i915: detect PCH encoders on Haswell   Daniel Vetter
      • [Intel-gfx] [PATCH 08/25] drm/i915: detect PCH encoders on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 09/25] drm/i915: enable power wells on Haswell init   Eugeni Dodonov
      • [Intel-gfx] [PATCH 09/25] drm/i915: enable power wells on Haswell init   Daniel Vetter
      • [Intel-gfx] [PATCH 09/25] drm/i915: enable power wells on Haswell init   Eugeni Dodonov
      • [Intel-gfx] [PATCH 09/25] drm/i915: enable power wells on Haswell init   Daniel Vetter
      • [Intel-gfx] [PATCH 09/25] drm/i915: enable power wells on Haswell init   Eugeni Dodonov
      • [Intel-gfx] [PATCH 10/25] drm/i915: add LPT PCH checks   Eugeni Dodonov
      • [Intel-gfx] [PATCH 11/25] drm/i915: handle DDI-related assertions   Eugeni Dodonov
      • [Intel-gfx] [PATCH 12/25] drm/i915: account for only one PCH receiver on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 13/25] drm/i915: initialize DDI buffer translations   Eugeni Dodonov
      • [Intel-gfx] [PATCH 14/25] drm/i915: support DDI training in FDI mode   Eugeni Dodonov
      • [Intel-gfx] [PATCH 15/25] drm/i915: use ironlake eld write routine for Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 16/25] drm/i915: define Haswell watermarks and clock gating   Eugeni Dodonov
      • [Intel-gfx] [PATCH 17/25] drm/i915: program WM_LINETIME on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 18/25] drm/i915: disable pipe DDI function when disabling pipe   Eugeni Dodonov
      • [Intel-gfx] [PATCH 19/25] drm/i915: program iCLKIP on Lynx Point   Eugeni Dodonov
      • [Intel-gfx] [PATCH 20/25] drm/i915: detect digital outputs on Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 21/25] drm/i915: add support for DDI-controlled digital outputs   Eugeni Dodonov
      • [Intel-gfx] [PATCH 22/25] drm/i915: add WR PLL programming table   Eugeni Dodonov
      • [Intel-gfx] [PATCH 23/25] drm/i915: move HDMI structs to shared location   Eugeni Dodonov
      • [Intel-gfx] [PATCH 23/25] drm/i915: move HDMI structs to shared location   Daniel Vetter
      • [Intel-gfx] [PATCH 24/25] drm/i915: prepare HDMI link for Haswell   Eugeni Dodonov
      • [Intel-gfx] [PATCH 25/25] drm/i915: hook Haswell devices in place   Eugeni Dodonov
      • [Intel-gfx] [PATCH 25/25] drm/i915: hook Haswell devices in place   Daniel Vetter
      • [Intel-gfx] [PATCH 2/2] drm/i915: Simplify interrupt processing for IvyBridge   Chris Wilson
      • [Intel-gfx] [PATCH 2/2] drm/i915: Simplify interrupt processing for IvyBridge   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Ben Widawsky
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Introduce for_each_ring() macro   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active   Ben Widawsky
      • [Intel-gfx] [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Takashi Iwai
  • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Takashi Iwai
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Takashi Iwai
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Takashi Iwai
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Chris Wilson
• [Intel-gfx] [QA] Testing report for `drm-intel-testing` (was: Updated -next)   Yang, Guang A
  • [Intel-gfx] How to build the Hardware Decode platform based on Ivy Bridge linux?   wanglijun at kedacom.com
  • [Intel-gfx] [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume   Chris Wilson
    • [Intel-gfx] [PATCH] i915: add dmabuf/prime buffer sharing support.   Daniel Vetter
    • [Intel-gfx] [PATCH] i915: add dmabuf/prime buffer sharing support.   Daniel Vetter
    • [Intel-gfx] [PATCH] i915: add dmabuf/prime buffer sharing support.   Chris Wilson
  • [Intel-gfx] [PATCH 2/2] drm/i915/dp: Remove eDP special cases from bandwidth checks   Chris Wilson
    • [Intel-gfx] [PATCH 2/2] drm/i915/dp: Remove eDP special cases from bandwidth checks   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/i915: Check whether the ring is initialised prior to dispatch   Chris Wilson
      • [Intel-gfx] [PATCH 2/2] drm/i915: Replace the feature tests for BLT/BSD with ring init checks   Chris Wilson
      • [Intel-gfx] [PATCH 1/2] drm/i915: Check whether the ring is initialised prior to dispatch   Daniel Vetter
• [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?   袁竞杰
  • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?   Eugeni Dodonov
    • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?   袁竞杰
    • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?   Eugeni Dodonov
    • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?   袁竞杰
    • [Intel-gfx] [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it   Jesse Barnes
• [Intel-gfx] OT: Video tearing   Oliver Seitz
  • [Intel-gfx] OT: Video tearing   Jesse Barnes
    • [Intel-gfx] [PATCH 1/3] drm/i915: Introduce for_each_ring() macro   Chris Wilson
    • [Intel-gfx] [PATCH 2/3] drm/i915: Check whether the ring is initialised prior to dispatch   Chris Wilson
    • [Intel-gfx] [PATCH 2/3] drm/i915: Check whether the ring is initialised prior to dispatch   Ben Widawsky
    • [Intel-gfx] [PATCH 1/3] drm/i915: Introduce for_each_ring() macro   Ben Widawsky
    • [Intel-gfx] [PATCH 1/3] drm/i915: Introduce for_each_ring() macro   Daniel Vetter
    • [Intel-gfx] [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks   Chris Wilson
    • [Intel-gfx] [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks   Ben Widawsky
    • [Intel-gfx] [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks   Chris Wilson
    • [Intel-gfx] [PATCH 1/5] drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq   Chris Wilson
    • [Intel-gfx] [PATCH 2/5] drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4   Chris Wilson
    • [Intel-gfx] [PATCH 3/5] drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x   Chris Wilson
    • [Intel-gfx] [PATCH 4/5] drm/i915/hdmi: Query the live connector status bit for G4x   Chris Wilson
    • [Intel-gfx] [PATCH 5/5] drm/i915/dp: For consistency use the DP hotplug synonyms   Chris Wilson
    • [Intel-gfx] [PATCH 5/5] drm/i915/dp: For consistency use the DP hotplug synonyms   Daniel Vetter
    • [Intel-gfx] [PATCH 1/2] drm/i915: implement hsw_write_infoframe   Paulo Zanoni
    • [Intel-gfx] [PATCH 2/2] drm/i915: small hdmi coding style cleanups   Paulo Zanoni
    • [Intel-gfx] [PATCH 2/2] drm/i915: small hdmi coding style cleanups   Eugeni Dodonov
    • [Intel-gfx] [PATCH 1/2] drm/i915: implement hsw_write_infoframe   Eugeni Dodonov
    • [Intel-gfx] [PATCH 1/2] drm/i915: implement hsw_write_infoframe   Daniel Vetter
    • [Intel-gfx] [PATCH 1/4 v4] drm/i915: timeout parameter for seqno wait   Ben Widawsky
    • [Intel-gfx] [PATCH 2/4 v3] drm/i915: improve i915_wait_request_begin trace   Ben Widawsky
    • [Intel-gfx] [PATCH 3/4 v6] drm/i915: wait render timeout ioctl   Ben Widawsky
    • [Intel-gfx] [PATCH 3/4 v6] drm/i915: wait render timeout ioctl   Eugeni Dodonov
    • [Intel-gfx] [PATCH 3/4 v6] drm/i915: wait render timeout ioctl   Ben Widawsky
    • [Intel-gfx] [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g   Ben Widawsky
    • [Intel-gfx] [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g   Eugeni Dodonov
    • [Intel-gfx] [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g   Ben Widawsky
    • [Intel-gfx] [PATCH] intel: add a timed wait function   Ben Widawsky
    • [Intel-gfx] [PATCH] tests/wait render timeout test   Ben Widawsky
    • [Intel-gfx] [PATCH 1/4 v4] drm/i915: timeout parameter for seqno wait   Eugeni Dodonov
• [Intel-gfx] Cedarview issue   Dmitri Toubelis
  • [Intel-gfx] Cedarview issue   Dmitri Toubelis
    • [Intel-gfx] Cedarview issue   Eugeni Dodonov
      • [Intel-gfx] [PATCH] drm/i915: fixup infoframe support for sdvo   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: fixup infoframe support for sdvo   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: fixup infoframe support for sdvo   Eugeni Dodonov
      • [Intel-gfx] [PATCH] drm/i915: fixup infoframe support for sdvo   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion   Peter Ross
      • [Intel-gfx] [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion   Paulo Zanoni
      • [Intel-gfx] [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Daniel Vetter
      • [Intel-gfx] [PATCH 2/2] drm/i915: properly implement doubleclocked hdmi modes   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Daniel Vetter
      • [Intel-gfx] [PATCH 2/2] drm/i915: properly implement doubleclocked hdmi modes   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Adam Jackson
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Paulo Zanoni
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Paulo Zanoni
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Adam Jackson
      • [Intel-gfx] mesa compile error   Kong, Bertrand C
      • [Intel-gfx] mesa compile error   Eugeni Dodonov
      • [Intel-gfx] mesa compile error   Kong, Bertrand C
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Paulo Zanoni
      • [Intel-gfx] [PATCH 1/2] drm/edid: adjust double-clocked cea modes   Daniel Vetter
      • [Intel-gfx] [PATCH 1/2] drm/i915: Convert BUG_ON(!pll->active) to a WARN   Chris Wilson
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Chris Wilson
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Daniel Vetter
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Chris Wilson
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Eugeni Dodonov
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Eugeni Dodonov
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Jesse Barnes
      • [Intel-gfx] [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training   Chris Wilson
      • [Intel-gfx] [PATCH 1/2] drm/i915: Convert BUG_ON(!pll->active) to a WARN   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Eugeni Dodonov
      • [Intel-gfx] [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: disable gmbus on i830   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: disable gmbus on i830   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: disable gmbus on i830   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Chris Wilson
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting   Eugeni Dodonov
      • [Intel-gfx] [PATCH] drm/i915: don't return -ENXIO from gmbus xfer   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't return -ENXIO from gmbus xfer   Daniel Vetter
      • [Intel-gfx] [PATCH] drm/i915: don't return -ENXIO from gmbus xfer   Daniel Vetter
• [Intel-gfx] [PATCH 1/2] drm/i915: i915.enable_backlight=0 disables intel_backlight   Kamal Mostafa
• [Intel-gfx] [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z   Kamal Mostafa
  • [Intel-gfx] [PATCH 1/2] drm/i915: small hdmi coding style cleanups   Paulo Zanoni
  • [Intel-gfx] [PATCH 2/2] drm/i915: implement hsw_write_infoframe   Paulo Zanoni
  • [Intel-gfx] [PATCH 2/2] drm/i915: implement hsw_write_infoframe   Eugeni Dodonov
  • [Intel-gfx] [PATCH 2/2] drm/i915: implement hsw_write_infoframe   Daniel Vetter
• [Intel-gfx] Question   Francisco Manuel Cardoso
  • [Intel-gfx] Question (about setting brightness and contrast)   Oliver Seitz
    • [Intel-gfx] Question (about setting brightness and contrast)   Oliver Seitz
      • [Intel-gfx] [PATCH] drm/i915: Replace pin count BUG_ON with warning   Sean Paul
      • [Intel-gfx] [PATCH] drm/i915: Replace pin count BUG_ON with warning   Sean Paul
• [Intel-gfx] OpenGL sampler objects on sandybridge with Ubuntu Linux 12.04   Mark Newiger
  • [Intel-gfx] OpenGL sampler objects on sandybridge with Ubuntu Linux 12.04   Daniel Vetter
    • [Intel-gfx] OpenGL sampler objects on sandybridge with Ubuntu Linux 12.04   Mark Newiger
• [Intel-gfx] Specific resolution without monitor   Carl Hunter
  • [Intel-gfx] Specific resolution without monitor   Oliver Seitz
    • [Intel-gfx] Specific resolution without monitor   The Fungi
      • [Intel-gfx] Specific resolution without monitor   Carl Hunter
      • [Intel-gfx] Specific resolution without monitor   Oliver Seitz
      • [Intel-gfx] Specific resolution without monitor   Carl Hunter
      • [Intel-gfx] Specific resolution without monitor   Oliver Seitz
    • [Intel-gfx] Specific resolution without monitor   paulo louro
• [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error   袁竞杰
• [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error   袁竞杰
  • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error, IVYBRIDGE_S_GT2   袁竞杰
    • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error, IVYBRIDGE_S_GT2   Xiang, Haihao
    • [Intel-gfx] [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error, IVYBRIDGE_S_GT2   袁竞杰
    • [Intel-gfx] [PATCH] drm/i915: clarify semaphore-ring interaction   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: clarify semaphore-ring interaction   Chris Wilson
• [Intel-gfx] IVB GPU turbo   Joe Bloggsian
  • [Intel-gfx] IVB GPU turbo   Jesse Barnes
    • [Intel-gfx] IVB GPU turbo   Joe Bloggsian
    • [Intel-gfx] IVB GPU turbo   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: consolidate interrupt naming scheme   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: consolidate interrupt naming scheme   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: consolidate interrupt naming scheme   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: consolidate interrupt naming scheme   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: unlock mutex before intel_modeset_init_hw   Paulo Zanoni
    • [Intel-gfx] [PATCH] drm/i915: unlock mutex before intel_modeset_init_hw   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: unlock mutex before intel_modeset_init_hw   Daniel Vetter
• [Intel-gfx] [PATCH] Fix GM965 TV out regression   Robert Lowery
  • [Intel-gfx] [PATCH] Fix GM965 TV out regression   Daniel Vetter
    • [Intel-gfx] [PATCH] Fix GM965 TV out regression   Chris Wilson
    • [Intel-gfx] [PATCH] Fix GM965 TV out regression   Robert Lowery
• [Intel-gfx] [REVERT] - drm/i915: Removing TV Out modes   Robert Lowery
  • [Intel-gfx] [REVERT] - drm/i915: Removing TV Out modes   Daniel Vetter
    • [Intel-gfx] [REVERT] - drm/i915: Removing TV Out modes   Rodrigo Vivi
• [Intel-gfx] [REVERT] - drm/i915: Removing TV Out modes   Robert Lowery
• [Intel-gfx] My GM45 Graphics   Emam Hossain
  • [Intel-gfx] [PATCH v2] drm/i915: clarify semaphore-ring interaction   Ben Widawsky
  • [Intel-gfx] [PATCH v3] drm/i915: clarify semaphore-ring interaction   Ben Widawsky
  • [Intel-gfx] [PATCH v4] drm/i915: clarify semaphore-ring interaction   Ben Widawsky
  • [Intel-gfx] [PATCH v4] drm/i915: clarify semaphore-ring interaction   Chris Wilson
  • [Intel-gfx] [PATCH v4] drm/i915: clarify semaphore-ring interaction   Ben Widawsky
  • [Intel-gfx] [PATCH v4] drm/i915: clarify semaphore-ring interaction   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: enable vdd when switching off the eDP panel   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: enable vdd when switching off the eDP panel   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: enable vdd when switching off the eDP panel   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: enable vdd when switching off the eDP panel   Keith Packard
  • [Intel-gfx] [PATCH] drm/i915: enable vdd when switching off the eDP panel   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Jesse Barnes
  • [Intel-gfx] [PATCH] drm/i915: IBX has a fixed pch pll to pch pipe mapping   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Fix PCH PLL assertions to not assume CRTC:PLL relationship   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Fix PCH PLL assertions to not assume CRTC:PLL relationship   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: don't return -ENXIO from gmbus xfer   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: be more careful when returning -ENXIO in gmbus transfer   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: be more careful when returning -ENXIO in gmbus transfer   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: don't return -ENXIO from gmbus xfer   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: [GEN7] Use HW scheduler for fixed function shaders   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: [GEN7] Use HW scheduler for fixed function shaders   Jesse Barnes
• [Intel-gfx] [PULL] last drm-intel-next for 3.5   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix module unload since error_state rework   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix module unload since error_state rework   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: be more careful when returning -ENXIO in gmbus transfer   Daniel Vetter
• [Intel-gfx] [PATCH 2/4] drm/i915: clarify preferred sdvo input mode code   Daniel Vetter
  • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Sean Paul
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Zdenek Kabelac
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Daniel Vetter
    • [Intel-gfx] Regression on GMA965 - display seems to have slow jump changes in brightness   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: always use RPNSWREQ for turbo change requests   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: always use RPNSWREQ for turbo change requests   Eugeni Dodonov
    • [Intel-gfx] [PATCH] drm/i915: always use RPNSWREQ for turbo change requests   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Adding TV Out Missing modes.   Rodrigo Vivi
    • [Intel-gfx] [PATCH] drm/i915: Adding TV Out Missing modes.   Rodrigo Vivi
    • [Intel-gfx] [PATCH] drm/i915: Adding TV Out Missing modes.   Daniel Vetter
• [Intel-gfx] [PATCH] drm/i915: Always update RPS interrupts thresholds along with frequency   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: wait for a vblank to pass after tv detect   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: wait for a vblank to pass after tv detect   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: wait for a vblank to pass after tv detect   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: wait for a vblank to pass after tv detect   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: wait for a vblank to pass after tv detect   Daniel Vetter
  • [Intel-gfx] [PATCH 1/3] drm/i915: disable RCBP and VDS unit clock gating on IVB and VLV   Jesse Barnes
  • [Intel-gfx] [PATCH 3/3] drm/i915: add L3 bank clock gating disable on IVB and VLV   Jesse Barnes
  • [Intel-gfx] [PATCH 1/3] drm/i915: disable RCBP and VDS unit clock gating on IVB and VLV   Daniel Vetter
  • [Intel-gfx] [PATCH 2/3] drm/i915: add TDL unit clock gating disable for IVB and VLV   Jesse Barnes
  • [Intel-gfx] [PATCH] drm/i915: reject doubleclocked cea modes on dp   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: reject doubleclocked cea modes on dp   Paulo Zanoni
  • [Intel-gfx] [PATCH] drm/i915: reject doubleclocked cea modes on dp   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: Make the lock for pageflips interruptible   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: fix up ivb plane 3 pageflips   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix up ivb plane 3 pageflips   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: fix up ivb plane 3 pageflips   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915: fix up ivb plane 3 pageflips   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915: Limit page allocations to lowmem (dma32) for i965   Chris Wilson
• [Intel-gfx] SNA crashes   Zdenek Kabelac
  • [Intel-gfx] SNA crashes   Chris Wilson
    • [Intel-gfx] SNA crashes   Zdenek Kabelac
    • [Intel-gfx] SNA crashes   Zdenek Kabelac
• [Intel-gfx] [pull] drm-intel-fixes for 3.5   Daniel Vetter
  • [Intel-gfx] [pull] drm-intel-fixes for 3.5   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: add min freq control to debugfs   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: add min freq control to debugfs   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: add min freq control to debugfs   Jesse Barnes
    • [Intel-gfx] [PATCH] drm/i915: add min freq control to debugfs   Eugeni Dodonov
    • [Intel-gfx] [PATCH 0/6] drm/i915: Framebuffer layout fixes and sanity checks   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 3/6] drm/i915: Zero initialize mode_cmd   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 1/6] drm/i915: Fix display pixel format handling   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 2/6] drm/i915: Check framebuffer stride more thoroughly   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 4/6] drm/i915: Check the framebuffer offset   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 5/6] drm/i915: Handle framebuffer offsets[]   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 5/6] drm/i915: Handle framebuffer offsets[]   Jesse Barnes
    • [Intel-gfx] [PATCH 5/6] drm/i915: Handle framebuffer offsets[]   Ville Syrjälä
    • [Intel-gfx] [PATCH 5/6] drm/i915: Handle framebuffer offsets[]   Daniel Vetter
    • [Intel-gfx] [PATCH 6/6] drm/i915: Reject page flips with changed format/offset/pitch   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH] drm/i915: Remove the error message for unbinding pinned buffers   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Remove the error message for unbinding pinned buffers   Daniel Vetter
    • [Intel-gfx] [PATCH 0/5] drm/i915: Clip video sprites properly   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 1/5] drm: Add struct drm_region and assorted utility functions   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 2/5] drm: Add drm_calc_{hscale, vscale}() utility functions   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 3/5] drm/i915: Implement proper clipping for video sprites   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 4/5] drm/i915: pixel_size == cpp   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 5/5] drm/i915: Bad pixel formats can't reach the sprite code   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 0/4] drm/i915: Make video sprites survive a modeset   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 1/4] drm: Keep a copy of last plane coordinates   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 2/4] drm: Add restore_fbdev_mode() hook to drm_fb_helper   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 3/4] drm/i915: Disable/enable planes around mode set   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 4/4] drm/i915: Implement restore_fbdev_mode hook   ville.syrjala at linux.intel.com
    • [Intel-gfx] [PATCH 0/4] drm/i915: Make video sprites survive a modeset   Jesse Barnes
    • [Intel-gfx] [PATCH 0/4] drm/i915: Make video sprites survive a modeset   Daniel Vetter
    • [Intel-gfx] [PATCH 0/4] drm/i915: Make video sprites survive a modeset   Ville Syrjälä
    • [Intel-gfx] [RFC] [PATCH 00/14] HPD/connector-polling rework   Daniel Vetter
    • [Intel-gfx] [PATCH 01/14] drm: extract drm_kms_helper_hotplug_event   Daniel Vetter
    • [Intel-gfx] [PATCH 02/14] drm: handle HDP and polled connectors separately   Daniel Vetter
    • [Intel-gfx] [PATCH 02/14] drm: handle HDP and polled connectors separately   Adam Jackson
    • [Intel-gfx] [PATCH] drm: handle HPD and polled connectors separately   Daniel Vetter
    • [Intel-gfx] [PATCH 1/2] drm: handle HPD and polled connectors separately   Daniel Vetter
    • [Intel-gfx] [PATCH 2/2] drm: run the hpd irq event code directly   Daniel Vetter
    • [Intel-gfx] [PATCH 03/14] drm: introduce DRM_CONNECTOR_POLL_FORCE   Daniel Vetter
    • [Intel-gfx] [PATCH] drm: introduce DRM_CONNECTOR_POLL_FORCE   Daniel Vetter
    • [Intel-gfx] [PATCH 04/14] drm/i915: set POLL_FORCE for sdvo outputs   Daniel Vetter
    • [Intel-gfx] [PATCH 05/14] drm: properly init/reset connector status   Daniel Vetter
    • [Intel-gfx] [PATCH 06/14] drm: kill unnecessary calls to connector->detect   Daniel Vetter
    • [Intel-gfx] [PATCH 07/14] drm: don't start the poll engine in probe_single_connector   Daniel Vetter
    • [Intel-gfx] [PATCH 08/14] drm: don't unnecessarily enable the polling work   Daniel Vetter
    • [Intel-gfx] [PATCH 09/14] drm: don't poll forced connectors   Daniel Vetter
    • [Intel-gfx] [PATCH 10/14] drm/i915: cache crt edid   Daniel Vetter
    • [Intel-gfx] [PATCH 11/14] drm/i915: cache dp edid   Daniel Vetter
    • [Intel-gfx] [PATCH 12/14] drm/i915: cache hdmi edid   Daniel Vetter
    • [Intel-gfx] [PATCH 13/14] drm/i915/sdvo: implement correct return value for ->get_modes   Daniel Vetter
    • [Intel-gfx] [PATCH 14/14] drm/i915: s/mdelay/msleep/ in the sdvo detect function   Daniel Vetter
    • [Intel-gfx] [PATCH 14/14] drm/i915: s/mdelay/msleep/ in the sdvo detect function   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Limit page allocations to lowmem (dma32) for i965   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Limit page allocations to lowmem (dma32) for i965   Daniel Vetter
  • No subject  
    • [Intel-gfx] [PATCH 00/11] More HDMI fixes   Paulo Zanoni
    • [Intel-gfx] [PATCH 01/11] drm/i915: add set_infoframes to struct intel_hdmi   Paulo Zanoni
    • [Intel-gfx] [PATCH 01/11] drm/i915: add set_infoframes to struct intel_hdmi   Chris Wilson
    • [Intel-gfx] [PATCH 02/11] drm/i915: properly alternate between DVI and HDMI   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/11] drm/i915: only set the HDMI port on the DIP once   Paulo Zanoni
    • [Intel-gfx] [PATCH 04/11] drm/i915: enable DIP before enabling each InfoFrame   Paulo Zanoni
    • [Intel-gfx] [PATCH 05/11] drm/i915: don't wait for vblank while writing InfoFrames   Paulo Zanoni
    • [Intel-gfx] [PATCH 06/11] drm/i915: explicitly disable the DIPs we're not using   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/11] drm/i915: disable DIP while changing the port   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/11] drm/i915: disable DIP while changing the port   Chris Wilson
    • [Intel-gfx] [PATCH 08/11] drm/i915: don't write 0 to DIP control at HDMI init   Paulo Zanoni
    • [Intel-gfx] [PATCH 08/11] drm/i915: don't write 0 to DIP control at HDMI init   Jesse Barnes
    • [Intel-gfx] [PATCH 09/11] drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI   Paulo Zanoni
    • [Intel-gfx] [PATCH 10/11] drm/i915: rename sdvox_reg to hdmi_reg on HDMI context   Paulo Zanoni
    • [Intel-gfx] [PATCH 11/11] drm/i915: remove comment about HSW HDMI DIPs   Paulo Zanoni
    • [Intel-gfx] [PATCH 1/4 v5] drm/i915: timeout parameter for seqno wait   Ben Widawsky
    • [Intel-gfx] [PATCH 3/4 v7] drm/i915: wait render timeout ioctl   Ben Widawsky
    • [Intel-gfx] [PATCH 3/4 v7] drm/i915: wait render timeout ioctl   Ben Widawsky
    • [Intel-gfx] [PATCH 4/4] [RESEND] drm/i915: s/i915_wait_request/i915_wait_seqno/g   Ben Widawsky
    • [Intel-gfx] [PATCH 4/4] [RESEND] drm/i915: s/i915_wait_request/i915_wait_seqno/g   Daniel Vetter
    • [Intel-gfx] [PATCH 2/4 v3] [RESEND] drm/i915: improve i915_wait_request_begin trace   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915/hdmi: Fix reg values for g4x_hdmi_connected   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915/hdmi: Fix reg values for g4x_hdmi_connected   Paulo Zanoni
    • [Intel-gfx] [PATCH] drm/i915/hdmi: Fix reg values for g4x_hdmi_connected   Daniel Vetter
    • [Intel-gfx] [RFC] fastboot   Chris Wilson
    • [Intel-gfx] [PATCH 01/43] drm/i915: Track unbound pages   Chris Wilson
    • [Intel-gfx] [PATCH 02/43] drm/i915: Only pwrite through the GTT if there is space in the aperture   Chris Wilson
    • [Intel-gfx] [PATCH 03/43] drm/i915: Try harder to allocate an mmap_offset   Chris Wilson
    • [Intel-gfx] [PATCH 04/43] drm/i915: Pin backing pages for pwrite   Chris Wilson
    • [Intel-gfx] [PATCH 05/43] drm/i915: Pin pages for pread   Chris Wilson
    • [Intel-gfx] [PATCH 06/43] drm/i915/debugfs: Show (count, size) of purgeable objects in i915_gem_objects   Chris Wilson
    • [Intel-gfx] [PATCH 07/43] drm: Introduce drm_mm_create_block()   Chris Wilson
    • [Intel-gfx] [PATCH 08/43] drm/i915: Fix detection of stolen base for gen2   Chris Wilson
    • [Intel-gfx] [PATCH 09/43] drm/i915: Fix location of stolen memory register for SandyBridge+   Chris Wilson
    • [Intel-gfx] [PATCH 10/43] drm/i915: Avoid clearing preallocated regions from the GTT   Chris Wilson
    • [Intel-gfx] [PATCH 11/43] drm/i915: Always use the scatterlists if available for GTT insertion   Chris Wilson
    • [Intel-gfx] [PATCH 12/43] drm/i915: Tidy handling of the scatterlist by ppgtt   Chris Wilson
    • [Intel-gfx] [PATCH 13/43] drm/i915: Delay allocation of stolen space for FBC   Chris Wilson
    • [Intel-gfx] [PATCH 14/43] drm/i915: Extract general object init routine   Chris Wilson
    • [Intel-gfx] [PATCH 15/43] drm/i915: Allow objects to be created with no backing pages, but stolen space   Chris Wilson
    • [Intel-gfx] [PATCH 16/43] drm/i915: Support readback of stolen objects upon error   Chris Wilson
    • [Intel-gfx] [PATCH 17/43] drm/i915: Handle stolen objects in pwrite   Chris Wilson
    • [Intel-gfx] [PATCH 18/43] drm/i915: Handle stolen objects for pread   Chris Wilson
    • [Intel-gfx] [PATCH 19/43] drm/i915: Introduce i915_gem_object_create_stolen()   Chris Wilson
    • [Intel-gfx] [PATCH 20/43] drm/i915: Allocate fbcon from stolen memory   Chris Wilson
    • [Intel-gfx] [PATCH 21/43] drm/i915: Allocate ringbuffers from stolen memory   Chris Wilson
    • [Intel-gfx] [PATCH 22/43] drm/i915: Allocate overlay registers from stolen memory   Chris Wilson
    • [Intel-gfx] [PATCH 23/43] drm/i915: Introduce i915_gem_object_create_stolen_for_preallocated   Chris Wilson
    • [Intel-gfx] [PATCH 24/43] drm/i915: Split the framebuffer_info creation into a separate routine   Chris Wilson
    • [Intel-gfx] [PATCH 25/43] drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon   Chris Wilson
    • [Intel-gfx] [PATCH 26/43] drm: add initial_config function to fb helper and add i915 support   Chris Wilson
    • [Intel-gfx] [PATCH 27/43] drm/i915: read initial config from hardware   Chris Wilson
    • [Intel-gfx] [PATCH 28/43] drm: don't zero out the CRTC even if it's the same as the current one   Chris Wilson
    • [Intel-gfx] [PATCH 28/43] drm: don't zero out the CRTC even if it's the same as the current one   Jesse Barnes
    • [Intel-gfx] [PATCH 29/43] drm/fb: don't NULL encoder CRTCs at fb init time   Chris Wilson
    • [Intel-gfx] [PATCH 30/43] drm/i915: when reading initial config, don't clobber PCH clock state   Chris Wilson
    • [Intel-gfx] [PATCH 31/43] drm/i915: use fb helper probe when building BIOS config   Chris Wilson
    • [Intel-gfx] [PATCH 32/43] drm/i915: read current LVDS config at boot   Chris Wilson
    • [Intel-gfx] [PATCH 33/43] drm/i915: more debug messages when BIOS display config can't be replicated   Chris Wilson
    • [Intel-gfx] [PATCH 34/43] drm/i915: allow 8 bit BIOS configs to be inherited   Chris Wilson
    • [Intel-gfx] [PATCH 35/43] drm/i915: add panel shutdown debug message   Chris Wilson
    • [Intel-gfx] [PATCH 36/43] drm/i915: try to handle multi-head BIOS configurations too   Chris Wilson
    • [Intel-gfx] [PATCH 37/43] drm/i915: Skip modifying PCH DREF if not changing clock sources   Chris Wilson
    • [Intel-gfx] [PATCH 38/43] drm/i915: Disable unused CRTCs   Chris Wilson
    • [Intel-gfx] [PATCH 39/43] drm/i915: remove unnecessary arg from intel_crtc_mode_get   Chris Wilson
    • [Intel-gfx] [PATCH 40/43] drm/i915: fetch sync polarity when building initial configuration   Chris Wilson
    • [Intel-gfx] [PATCH 41/43] drm/i915: remove unnecessary arg from intel_crtc_clock_get   Chris Wilson
    • [Intel-gfx] [PATCH 42/43] drm/i915: HACK: hard code existing mode clock to 137500   Chris Wilson
    • [Intel-gfx] [PATCH 43/43] drm/i915: HACK: force plane enable at plane update time   Chris Wilson
  • [Intel-gfx] [PATCH 2/5] drm/i915: Dynamic Parity Detection handling   Jesse Barnes
    • [Intel-gfx] [PATCH 2/5] drm/i915: Dynamic Parity Detection handling   Jesse Barnes
    • [Intel-gfx] [PATCH 2/5] drm/i915: Dynamic Parity Detection handling   Ben Widawsky
  • [Intel-gfx] [PATCH 3/5] drm/i915: enable parity error interrupts   Jesse Barnes
  • [Intel-gfx] [PATCH 4/5] drm/i915: remap l3 on hw init   Jesse Barnes
    • [Intel-gfx] [PATCH 4/5] drm/i915: remap l3 on hw init   Ben Widawsky
  • [Intel-gfx] [PATCH 5/5] drm/i915: l3 parity sysfs interface   Jesse Barnes
    • [Intel-gfx] [PATCH 5/5] drm/i915: l3 parity sysfs interface   Ben Widawsky
      • [Intel-gfx] [PATCH 1/4] drm/i915: disable RCBP and VDS unit clock gating on IVB and VLV   Jesse Barnes
      • [Intel-gfx] [PATCH 2/4] drm/i915: load boot context at driver init time   Jesse Barnes
      • [Intel-gfx] [PATCH 3/4] drm/i915: add TDL unit clock gating disable for IVB and VLV   Jesse Barnes
      • [Intel-gfx] [PATCH 4/4] drm/i915: add L3 bank clock gating disable on IVB and VLV   Jesse Barnes
      • [Intel-gfx] [PATCH] drm/i915: add min freq control to debugfs   Jesse Barnes
      • [Intel-gfx] [PATCH 1/4 v2] drm/i915: Dynamic Parity Detection handling   Ben Widawsky
      • [Intel-gfx] [PATCH 3/4 v2] drm/i915: remap l3 on hw init   Ben Widawsky
      • [Intel-gfx] [PATCH 4/4] drm/i915: l3 parity sysfs interface   Ben Widawsky
      • [Intel-gfx] [PATCH 4/4] drm/i915: l3 parity sysfs interface   Daniel Vetter
      • [Intel-gfx] [PATCH 4/4] drm/i915: l3 parity sysfs interface   Ben Widawsky
      • [Intel-gfx] [PATCH 5/6] tools/dpf: Tool to read and write l3 remap registers.   Ben Widawsky
      • [Intel-gfx] [PATCH 5/6] tools/dpf: Tool to read and write l3 remap registers.   Paul Menzel
      • [Intel-gfx] [PATCH 6/6] tests/dpf: simple dpf test   Ben Widawsky
      • [Intel-gfx] [PATCH 2/4] drm/i915: enable parity error interrupts   Ben Widawsky
  • [Intel-gfx] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy   Oleksij Rempel (fishor)
    • [Intel-gfx] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy   Daniel Vetter
• [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
  • [Intel-gfx] gstreamer-vaapi does not work with g45   Oliver Seitz
    • [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Oliver Seitz
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Matt Turner
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Niccolò Belli
      • [Intel-gfx] gstreamer-vaapi does not work with g45   Oliver Seitz
  • No subject  
    • [Intel-gfx] [PATCH 00/14] More HDMI fixes V2   Paulo Zanoni
    • [Intel-gfx] [PATCH 01/14] drm/i915: add set_infoframes to struct intel_hdmi   Paulo Zanoni
    • [Intel-gfx] [PATCH 02/14] drm/i915: properly alternate between DVI and HDMI   Paulo Zanoni
    • [Intel-gfx] [PATCH 02/14] drm/i915: properly alternate between DVI and HDMI   Chris Wilson
    • [Intel-gfx] [PATCH 02/14] drm/i915: properly alternate between DVI and HDMI   Paulo Zanoni
    • [Intel-gfx] [PATCH 03/14] drm/i915: only set the HDMI port on the DIP once   Paulo Zanoni
    • [Intel-gfx] [PATCH 04/14] drm/i915: enable DIP before enabling each InfoFrame   Paulo Zanoni
    • [Intel-gfx] [PATCH 05/14] drm/i915: don't wait for vblank while writing InfoFrames   Paulo Zanoni
    • [Intel-gfx] [PATCH 06/14] drm/i915: explicitly disable the DIPs we're not using   Paulo Zanoni
    • [Intel-gfx] [PATCH 07/14] drm/i915: disable DIP while changing the port   Paulo Zanoni
    • [Intel-gfx] [PATCH 08/14] drm/i915: don't write 0 to DIP control at HDMI init   Paulo Zanoni
    • [Intel-gfx] [PATCH 09/14] drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI   Paulo Zanoni
    • [Intel-gfx] [PATCH 10/14] drm/i915: rename sdvox_reg to hdmi_reg on HDMI context   Paulo Zanoni
    • [Intel-gfx] [PATCH 11/14] drm/i915: remove comment about HSW HDMI DIPs   Paulo Zanoni
    • [Intel-gfx] [PATCH 12/14] drm/i915: clarify confusion between HDMI and SDVO registers   Paulo Zanoni
    • [Intel-gfx] [PATCH 13/14] drm/i915: add some barriers when changing DIPs   Paulo Zanoni
    • [Intel-gfx] [PATCH 13/14] drm/i915: add some barriers when changing DIPs   Daniel Vetter
    • [Intel-gfx] [PATCH 14/14] drm/i915: make sure HDMI port is disabled inside set_infoframes   Paulo Zanoni
    • [Intel-gfx] [PATCH 14/14] drm/i915: make sure HDMI port is disabled inside set_infoframes   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: Reset last_retired_head when resetting ring   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: Reset last_retired_head when resetting ring   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: don't chnage the original mode in dp_mode_fixup   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: don't chnage the original mode in dp_mode_fixup   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: don't chnage the original mode in dp_mode_fixup   Daniel Vetter
    • [Intel-gfx] [PATCH 1/2] drm/i915: adjusted_mode->clock in the dp mode_fixup   Daniel Vetter
    • [Intel-gfx] [PATCH 2/2] drm/i915: don't chnage the original mode in dp_mode_fixup   Daniel Vetter
    • [Intel-gfx] [PATCH 2/2] drm/i915: don't chnage the original mode in dp_mode_fixup   Paul Menzel
    • [Intel-gfx] [PATCH 1/2] drm/i915: adjusted_mode->clock in the dp mode_fixup   Chris Wilson
    • [Intel-gfx] [PATCH 1/2] drm/i915: adjusted_mode->clock in the dp mode_fixup   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: compute the target_clock for edp directly   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: compute the target_clock for edp directly   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: compute the target_clock for edp directly   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: compute the target_clock for edp directly   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: compute the target_clock for edp directly   Daniel Vetter
    • [Intel-gfx] [PATCH 1/3] drm/i915: clarify IBX dp workaround   Daniel Vetter
    • [Intel-gfx] [PATCH 1/3] drm/i915: clarify IBX dp workaround   Chris Wilson
    • [Intel-gfx] [PATCH 2/3] drm/i915: implement IBX hdmi transcoder select workaround   Daniel Vetter
    • [Intel-gfx] [PATCH 2/3] drm/i915: implement IBX hdmi transcoder select workaround   Chris Wilson
    • [Intel-gfx] [PATCH 3/3] drm/i915: assert that the IBX port transcoder select w/a is implemented   Daniel Vetter
    • [Intel-gfx] [PATCH 3/3] drm/i915: assert that the IBX port transcoder select w/a is implemented   Chris Wilson
    • [Intel-gfx] [PATCH 3/3] drm/i915: assert that the IBX port transcoder select w/a is implemented   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set   Chris Wilson
    • [Intel-gfx] [PATCH] drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: there's no cxsr on ilk   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: there's no cxsr on ilk   Eugeni Dodonov
    • [Intel-gfx] [PATCH] drm/i915: there's no cxsr on ilk   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: extract object unplug code from busy/wait_timeout ioctl   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: extract object unplug code from busy/wait_timeout ioctl   Ben Widawsky
    • [Intel-gfx] [PATCH] drm/i915: extract object unplug code from busy/wait_timeout ioctl   Daniel Vetter
    • [Intel-gfx] [PATCH] drm/i915: extract object unplug code from busy/wait_timeout ioctl   Eric Anholt
    • [Intel-gfx] [PATCH] drm/i915: extract object unplug code from busy/wait_timeout ioctl   Daniel Vetter
• [Intel-gfx] Lots of i915/drm spew on 3.4   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915/crt: Do not rely upon the HPD presence pin   Chris Wilson
  • [Intel-gfx] [PATCH] drm/i915/crt: Do not rely upon the HPD presence pin   Daniel Vetter
  • [Intel-gfx] [PATCH] drm/i915/crt: Do not rely upon the HPD presence pin   Dave Airlie
  • [Intel-gfx] [PATCH 1/3] drm/i915: ivybridge_handle_parity_error should be static   Daniel Vetter
  • [Intel-gfx] [PATCH 2/3] drm/i915: initialize the parity work only once   Daniel Vetter
  • [Intel-gfx] [PATCH 2/3] drm/i915: initialize the parity work only once   Ben Widawsky
  • [Intel-gfx] [PATCH 3/3] drm/i915: simplify sysfs setup code   Daniel Vetter
  • [Intel-gfx] [PATCH 3/3] drm/i915: simplify sysfs setup code   Ben Widawsky
  • [Intel-gfx] [PATCH 1/3] drm/i915: ivybridge_handle_parity_error should be static   Ben Widawsky
• [Intel-gfx] Lots of i915/drm spew on 3.4   Paulo Zanoni
• [Intel-gfx] (no subject)   Muhammad Jamil
• [Intel-gfx] [PATCH 14/14] drm/i915: s/mdelay/msleep/ in the sdvo detect function   Daniel Vetter

Last message date: Thu May 31 23:53:18 PDT 2012
Archived on: Fri Jun 1 00:58:30 PDT 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...