[Intel-gfx] [PATCH 35/36] drm/i915: don't limit Haswell CRT encoder to pipe A

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

This is a full revert of 59c859d6f2e78344945e8a8406a194156176bc4e:
    drm/i915: account for only one PCH receiver on Haswell

Now that the PCH code is fixed to be able use the only PCH transcoder
independently of the pipe and CPU transcoder, we can revert this.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c     |  5 +----
 drivers/gpu/drm/i915/intel_display.c | 15 +++------------
 2 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1c97c27..124fd78 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -764,10 +764,7 @@ void intel_crt_init(struct drm_device *dev)
 
 	crt->base.type = INTEL_OUTPUT_ANALOG;
 	crt->base.cloneable = true;
-	if (IS_HASWELL(dev))
-		crt->base.crtc_mask = (1 << 0);
-	else
-		crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
 
 	if (IS_GEN2(dev))
 		connector->interlace_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0119b3b..c495bfa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1151,14 +1151,9 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
 	u32 val;
 	bool cur_state;
 
-	if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
-			DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n");
-			return;
-	} else {
-		reg = FDI_RX_CTL(pipe);
-		val = I915_READ(reg);
-		cur_state = !!(val & FDI_RX_ENABLE);
-	}
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_RX_ENABLE);
 	WARN(cur_state != state,
 	     "FDI RX state assertion failure (expected %s, current %s)\n",
 	     state_string(state), state_string(cur_state));
@@ -1191,10 +1186,6 @@ static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
 	int reg;
 	u32 val;
 
-	if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
-		DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n");
-		return;
-	}
 	reg = FDI_RX_CTL(pipe);
 	val = I915_READ(reg);
 	WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
-- 
1.7.11.4