[Intel-gfx] [PATCH 02/11] drm/i915: Add SURFLIVE register definitions

Jesse Barnes jbarnes at virtuousgeek.org
Wed Oct 31 21:23:05 CET 2012


On Wed, 31 Oct 2012 17:50:15 +0200
ville.syrjala at linux.intel.com wrote:

> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |    7 +++++++
>  1 files changed, 7 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index da8400a..2555986 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3041,6 +3041,7 @@
>  #define _DSPASIZE		0x70190
>  #define _DSPASURF		0x7019C /* 965+ only */
>  #define _DSPATILEOFF		0x701A4 /* 965+ only */
> +#define _DSPASURFLIVE		0x701AC
>  
>  #define DSPCNTR(plane) _PIPE(plane, _DSPACNTR, _DSPBCNTR)
>  #define DSPADDR(plane) _PIPE(plane, _DSPAADDR, _DSPBADDR)
> @@ -3050,6 +3051,7 @@
>  #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
>  #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
>  #define DSPLINOFF(plane) DSPADDR(plane)
> +#define DSPSURFLIVE(plane) _PIPE(plane, _DSPASURFLIVE, _DSPBSURFLIVE)
>  
>  /* Display/Sprite base address macros */
>  #define DISP_BASEADDR_MASK	(0xfffff000)
> @@ -3095,6 +3097,7 @@
>  #define _DSPBSIZE		0x71190
>  #define _DSPBSURF		0x7119C
>  #define _DSPBTILEOFF		0x711A4
> +#define _DSPBSURFLIVE		0x711AC
>  
>  /* Sprite A control */
>  #define _DVSACNTR		0x72180
> @@ -3160,6 +3163,7 @@
>  #define DVSTILEOFF(pipe) _PIPE(pipe, _DVSATILEOFF, _DVSBTILEOFF)
>  #define DVSKEYVAL(pipe) _PIPE(pipe, _DVSAKEYVAL, _DVSBKEYVAL)
>  #define DVSKEYMSK(pipe) _PIPE(pipe, _DVSAKEYMSK, _DVSBKEYMSK)
> +#define DVSSURFLIVE(pipe) _PIPE(pipe, _DVSASURFLIVE, _DVSBSURFLIVE)
>  
>  #define _SPRA_CTL		0x70280
>  #define   SPRITE_ENABLE			(1<<31)
> @@ -3194,6 +3198,7 @@
>  #define _SPRA_SURF		0x7029c
>  #define _SPRA_KEYMAX		0x702a0
>  #define _SPRA_TILEOFF		0x702a4
> +#define _SPRA_SURFLIVE		0x702ac
>  #define _SPRA_SCALE		0x70304
>  #define   SPRITE_SCALE_ENABLE	(1<<31)
>  #define   SPRITE_FILTER_MASK	(3<<29)
> @@ -3214,6 +3219,7 @@
>  #define _SPRB_SURF		0x7129c
>  #define _SPRB_KEYMAX		0x712a0
>  #define _SPRB_TILEOFF		0x712a4
> +#define _SPRB_SURFLIVE		0x712ac
>  #define _SPRB_SCALE		0x71304
>  #define _SPRB_GAMC		0x71400
>  
> @@ -3229,6 +3235,7 @@
>  #define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF)
>  #define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE)
>  #define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
> +#define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE)
>  
>  /* VBIOS regs */
>  #define VGACNTRL		0x71400

Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

-- 
Jesse Barnes, Intel Open Source Technology Center



More information about the Intel-gfx mailing list