[Intel-gfx] [PATCH 6/9] drm/i915: Add eDP support for Valleyview

[Daniel Vetter]

On Wed, Sep 26, 2012 at 04:31:46PM +0200, Daniel Vetter wrote:
> On Wed, Sep 26, 2012 at 07:07:35PM +0530, Vijay Purushothaman wrote:
> > Eventhough Valleyview display block is derived from Cantiga, VLV
> > supports eDP. So, added eDP checks in i9xx_crtc_mode_set path.
> > 
> > v2: use different DPIO_DIVISOR values for VGA, DP and eDP
> > v3: fix DPIO value calculation to use same values for all display
> > 	interfaces
> > 
> > Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
> > Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
> > Signed-off-by: Ben Widawsky <benjamin.widawsky at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c |    6 ++++++
> >  drivers/gpu/drm/i915/intel_dp.c      |   13 ++++++++-----
> >  2 files changed, 14 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index a8a81d1..aee6151 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -4405,6 +4405,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> >  		}
> >  	}
> >  
> > +	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
> > +		pipeconf |= PIPECONF_BPP_6 |
> > +			PIPECONF_ENABLE |
> > +			I965_PIPECONF_ACTIVE;
> > +	}
> 
> No.
> 
> Jani Nikula and me just figured out that we have a giant mess with 6bpc
> dithering on DP outputs, but unconditionally enabling 6bpc on vlv eDP only
> papers over issues.

Forgotten to put Jani on cc.
-Daniel

> 
> > +
> >  	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
> >  	drm_mode_debug_printmodeline(mode);
> >  
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index c111c3f..af57027 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -885,7 +885,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
> >  
> >  	/* Split out the IBX/CPU vs CPT settings */
> >  
> > -	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
> > +	if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
> >  		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
> >  			intel_dp->DP |= DP_SYNC_HS_HIGH;
> >  		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
> > @@ -1474,7 +1474,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
> >  {
> >  	struct drm_device *dev = intel_dp->base.base.dev;
> >  
> > -	if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
> > +	if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
> >  		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
> >  		case DP_TRAIN_VOLTAGE_SWING_400:
> >  			return DP_TRAIN_PRE_EMPHASIS_6;
> > @@ -1773,7 +1773,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> >  		uint32_t    signal_levels;
> >  
> >  
> > -		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
> > +		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
> >  			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
> >  			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
> >  		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
> > @@ -1859,7 +1859,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
> >  			break;
> >  		}
> >  
> > -		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
> > +		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
> >  			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
> >  			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
> >  		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
> > @@ -2471,7 +2471,10 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> >  		if (intel_dpd_is_edp(dev))
> >  			intel_dp->is_pch_edp = true;
> >  
> > -	if (output_reg == DP_A || is_pch_edp(intel_dp)) {
> > +	if (IS_VALLEYVIEW(dev) && output_reg == DP_C) {
> > +		type = DRM_MODE_CONNECTOR_eDP;
> > +		intel_encoder->type = INTEL_OUTPUT_EDP;
> 
> You need to be a notch more careful, since since
> 
> commit cb0953d734348e8862d6d7edc666cfb3bf6d8fae
> Author: Adam Jackson <ajax at redhat.com>
> Date:   Fri Jul 16 14:46:29 2010 -0400
> 
>     drm/i915: Initialize LVDS and eDP outputs before anything else
> 
> We initialize built-in panels before external outputs. Hence you need to
> adjust intel_setup_outputs for vlv eDP, too, so that the eDP output comes
> first. A bit a mess, I know.
> 
> Cheers, Daniel
> 
> > +	} else if (output_reg == DP_A || is_pch_edp(intel_dp)) {
> >  		type = DRM_MODE_CONNECTOR_eDP;
> >  		intel_encoder->type = INTEL_OUTPUT_EDP;
> >  	} else {
> > -- 
> > 1.7.9.5
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch