[Intel-gfx] [PATCH 2/7] drm/i915: shovel compute clock into crtc->config.dpll on ilk

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Apr 19 12:14:46 CEST 2013


On Fri, Apr 19, 2013 at 11:14:32AM +0200, Daniel Vetter wrote:
> This was somehow lost in the pipe_config->dpll introduction in
> 
> commit f47709a9502f3715cc488b788ca91cf0c142b1b1
> Author: Daniel Vetter <daniel.vetter at ffwll.ch>
> Date:   Thu Mar 28 10:42:02 2013 +0100
> 
>     drm/i915: create pipe_config->dpll for clock state
> 
> While at it, extract a few small helpers for common computations.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 39 +++++++++++++++++++++++++++---------
>  1 file changed, 29 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index ca2433b..5437a5e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -561,6 +561,11 @@ static void pineview_clock(int refclk, intel_clock_t *clock)
>  	clock->dot = clock->vco / clock->p;
>  }
>  
> +static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
> +{
> +	return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
> +}

There are more places where this same computation appears. There
could be more unification if we either used intel_clock_t everywhere
instead if struct dpll, or if we embed struct dpll inside intel_clock_t.

> +
>  static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
>  {
>  	if (IS_PINEVIEW(dev)) {
> @@ -4253,6 +4258,16 @@ static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc)
>  	crtc->config.clock_set = true;
>  }
>  
> +static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
> +{
> +	return (1 << dpll->n) << 16 | dpll->m1 << 8 | dpll->m2;
> +}
> +
> +static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
> +{
> +	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
> +}
> +
>  static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
>  				     intel_clock_t *reduced_clock)
>  {
> @@ -4260,15 +4275,14 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	int pipe = crtc->pipe;
>  	u32 fp, fp2 = 0;
> -	struct dpll *clock = &crtc->config.dpll;
>  
>  	if (IS_PINEVIEW(dev)) {
> -		fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
> +		fp = pnv_dpll_compute_fp(&crtc->config.dpll);
>  		if (reduced_clock)
>  			fp2 = (1 << reduced_clock->n) << 16 |
>  				reduced_clock->m1 << 8 | reduced_clock->m2;
>  	} else {
> -		fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
> +		fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
>  		if (reduced_clock)
>  			fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
>  				reduced_clock->m2;
> @@ -5604,8 +5618,13 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
>  	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
>  }
>  
> +static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
> +{
> +	return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
> +}
> +
>  static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> -				      intel_clock_t *clock, u32 *fp,
> +				      u32 *fp,
>  				      intel_clock_t *reduced_clock, u32 *fp2)
>  {
>  	struct drm_crtc *crtc = &intel_crtc->base;
> @@ -5645,7 +5664,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
>  	} else if (is_sdvo && is_tv)
>  		factor = 20;
>  
> -	if (clock->m < factor * clock->n)
> +	if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
>  		*fp |= FP_CB_TUNE;
>  
>  	if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
> @@ -5669,11 +5688,11 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
>  		dpll |= DPLL_DVO_HIGH_SPEED;
>  
>  	/* compute bitmask from p1 value */
> -	dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
> +	dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
>  	/* also FPA1 */
> -	dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
> +	dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
>  
> -	switch (clock->p2) {
> +	switch (intel_crtc->config.dpll.p2) {
>  	case 5:
>  		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
>  		break;
> @@ -5768,12 +5787,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
>  	if (intel_crtc->config.has_pch_encoder) {
>  		struct intel_pch_pll *pll;
>  
> -		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
> +		fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
>  		if (has_reduced_clock)
>  			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
>  				reduced_clock.m2;
>  
> -		dpll = ironlake_compute_dpll(intel_crtc, &clock,
> +		dpll = ironlake_compute_dpll(intel_crtc,
>  					     &fp, &reduced_clock,
>  					     has_reduced_clock ? &fp2 : NULL);
>  
> -- 
> 1.7.11.7
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC



More information about the Intel-gfx mailing list