[Intel-gfx] [PATCH 6/6] DRAFT: drm/i915: do adapter power state notification on PC8+ enable/disable

Paulo Zanoni przanoni at gmail.com
Fri Aug 23 22:14:00 CEST 2013


2013/8/23 Ville Syrjälä <ville.syrjala at linux.intel.com>:
> On Fri, Aug 23, 2013 at 04:41:57PM -0300, Paulo Zanoni wrote:
>> 2013/8/23 Kristen Carlson Accardi <kristen.c.accardi at intel.com>:
>> > On Fri, 23 Aug 2013 13:44:17 -0300
>> > Paulo Zanoni <przanoni at gmail.com> wrote:
>> >
>> >> 2013/8/23 Jani Nikula <jani.nikula at intel.com>:
>> >>
>> >> /* Please insert explanation on why we need this and what changes if
>> >> we do this. */
>> >>
>> >> I applied your patches and booted them. I got into PC8, did the PC8
>> >> test suite and nothing changed. I really don't know what to expect
>> >> from this series and/or how to check what's improving. Also, see
>> >> below:
>> >>
>> >
>> > So this is one of these things that will have no visible impact on
>> > i915, but will impact other parts of the system.  So I think the only
>> > way to test it is by throwing it on the SIP board and checking the
>> > power level of the components this impacts (Audio, thermal, KBC/EC,
>> > LPT).  And without the code which does the actual PCI D3 request from
>> > i915, nothing will happen.
>>
>> I was told we could try to verify this by reading PCI config register
>> 0xd4, but for me it's always 0x0, which means we're probably not
>> really getting into D3.
>
> You have to write 0x3 into the PCI PM register to make it enter D3.
> Exactly like you do when you suspend the whole machine.
>
> Not sure 0xd4 is the correct offset in this case, but you can look
> it up from lspci output (remember +4), or in kernel code just use
> pci_dev.pm_cap+4. Hmm, it's 0xd4 in my SNB at least. Maybe it's always
> the same for the GPU.

Check the description of 0xd4 on BSpec.

I actually wrote the "get into D3" value to it (using setpci), and
then when I got out of PC8 I saw tons and tons of error messages on
dmesg due to the fact that we were failing to write registers. Which
means it probably works, but we may have more work to do.

>
> --
> Ville Syrjälä
> Intel OTC



-- 
Paulo Zanoni



More information about the Intel-gfx mailing list