[Intel-gfx] [PATCH 04/19] drm/i915: add pipe_config->pixel_multiplier

Daniel Vetter daniel.vetter at ffwll.ch
Wed Feb 13 12:32:07 CET 2013


Used by SDVO (and hopefully, eventually HDMI, if we ever get around
to fixing up the low dotclock CEA modes ...).

This required adding a new encoder->mode_set callback to be able to
pass around the intel_crtc_config.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++-----------------
 drivers/gpu/drm/i915/intel_drv.h     | 19 ++-------
 drivers/gpu/drm/i915/intel_sdvo.c    | 39 +++++++++---------
 3 files changed, 66 insertions(+), 72 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cb40c57..96a249b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4246,14 +4246,15 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
 }
 
 static void vlv_update_pll(struct drm_crtc *crtc,
-			   struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode,
 			   intel_clock_t *clock, intel_clock_t *reduced_clock,
 			   int num_connectors)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	u32 dpll, mdiv, pdiv;
 	u32 bestn, bestm1, bestm2, bestp1, bestp2;
@@ -4320,11 +4321,11 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
 	temp = 0;
 	if (is_sdvo) {
-		temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (temp > 1)
-			temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-		else
-			temp = 0;
+		temp = 0;
+		if (intel_crtc->config.pixel_multiplier > 1) {
+			temp = (intel_crtc->config.pixel_multiplier - 1)
+				<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
+		}
 	}
 	I915_WRITE(DPLL_MD(pipe), temp);
 	POSTING_READ(DPLL_MD(pipe));
@@ -4350,14 +4351,15 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 }
 
 static void i9xx_update_pll(struct drm_crtc *crtc,
-			    struct drm_display_mode *mode,
-			    struct drm_display_mode *adjusted_mode,
 			    intel_clock_t *clock, intel_clock_t *reduced_clock,
 			    int num_connectors)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
@@ -4374,11 +4376,12 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 		dpll |= DPLLB_MODE_LVDS;
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
+
 	if (is_sdvo) {
-		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (pixel_multiplier > 1) {
-			if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
-				dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+		if ((intel_crtc->config.pixel_multiplier > 1) &&
+		    (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+			dpll |= (intel_crtc->config.pixel_multiplier - 1)
+				<< SDVO_MULTIPLIER_SHIFT_HIRES;
 		}
 		dpll |= DPLL_DVO_HIGH_SPEED;
 	}
@@ -4443,11 +4446,11 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4) {
 		u32 temp = 0;
 		if (is_sdvo) {
-			temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-			if (temp > 1)
-				temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-			else
-				temp = 0;
+			temp = 0;
+			if (intel_crtc->config.pixel_multiplier > 1) {
+				temp = (intel_crtc->config.pixel_multiplier - 1)
+					<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
+			}
 		}
 		I915_WRITE(DPLL_MD(pipe), temp);
 	} else {
@@ -4661,11 +4664,11 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
 	else if (IS_VALLEYVIEW(dev))
-		vlv_update_pll(crtc, mode, adjusted_mode, &clock,
+		vlv_update_pll(crtc, &clock,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
 	else
-		i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+		i9xx_update_pll(crtc, &clock,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
 
@@ -5312,17 +5315,18 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
 	return bps / (link_bw * 8) + 1;
 }
 
-static void ironlake_set_m_n(struct drm_crtc *crtc,
-			     struct drm_display_mode *mode,
-			     struct drm_display_mode *adjusted_mode)
+static void ironlake_set_m_n(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	struct intel_encoder *intel_encoder, *edp_encoder = NULL;
 	struct intel_link_m_n m_n = {0};
-	int target_clock, pixel_multiplier, lane, link_bw;
+	int target_clock, lane, link_bw;
 	bool is_dp = false, is_cpu_edp = false;
 
 	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
@@ -5340,7 +5344,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 	}
 
 	/* FDI link */
-	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 	lane = 0;
 	/* CPU eDP doesn't require FDI link, so just set DP M/N
 	   according to current link config */
@@ -5371,8 +5374,8 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 
 	intel_crtc->fdi_lanes = lane;
 
-	if (pixel_multiplier > 1)
-		link_bw *= pixel_multiplier;
+	if (intel_crtc->config.pixel_multiplier > 1)
+		link_bw *= intel_crtc->config.pixel_multiplier;
 	intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
 
 	I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
@@ -5382,7 +5385,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 }
 
 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
-				      struct drm_display_mode *adjusted_mode,
 				      intel_clock_t *clock, u32 fp)
 {
 	struct drm_crtc *crtc = &intel_crtc->base;
@@ -5390,7 +5392,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	uint32_t dpll;
-	int factor, pixel_multiplier, num_connectors = 0;
+	int factor, num_connectors = 0;
 	bool is_lvds = false, is_sdvo = false, is_tv = false;
 	bool is_dp = false, is_cpu_edp = false;
 
@@ -5441,9 +5443,9 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 	if (is_sdvo) {
-		pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		if (pixel_multiplier > 1) {
-			dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+		if (intel_crtc->config.pixel_multiplier > 1) {
+			dpll |= (intel_crtc->config.pixel_multiplier - 1)
+				<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
 		dpll |= DPLL_DVO_HIGH_SPEED;
 	}
@@ -5547,7 +5549,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
 			reduced_clock.m2;
 
-	dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+	dpll = ironlake_compute_dpll(intel_crtc, &clock, fp);
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
@@ -5601,7 +5603,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
-	ironlake_set_m_n(crtc, mode, adjusted_mode);
+	ironlake_set_m_n(crtc);
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5717,7 +5719,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
 	if (!is_dp || is_cpu_edp)
-		ironlake_set_m_n(crtc, mode, adjusted_mode);
+		ironlake_set_m_n(crtc);
 
 	haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
@@ -5768,8 +5770,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			encoder->base.base.id,
 			drm_get_encoder_name(&encoder->base),
 			mode->base.id, mode->name);
-		encoder_funcs = encoder->base.helper_private;
-		encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+		if (encoder->mode_set) {
+			encoder->mode_set(encoder);
+		} else {
+			encoder_funcs = encoder->base.helper_private;
+			encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+		}
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 006d445..9c972eb 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -102,8 +102,6 @@
 #define INTEL_DVO_CHIP_TVOUT 4
 
 /* drm_display_mode->private_flags */
-#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
-#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
 #define INTEL_MODE_DP_FORCE_6BPC (0x10)
 /*
  * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
@@ -111,20 +109,6 @@
  */
 #define INTEL_MODE_LIMITED_COLOR_RANGE (0x40)
 
-static inline void
-intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
-				int multiplier)
-{
-	mode->clock *= multiplier;
-	mode->private_flags |= multiplier;
-}
-
-static inline int
-intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
-{
-	return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
-}
-
 struct intel_framebuffer {
 	struct drm_framebuffer base;
 	struct drm_i915_gem_object *obj;
@@ -159,6 +143,7 @@ struct intel_encoder {
 	void (*pre_pll_enable)(struct intel_encoder *);
 	void (*pre_enable)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
+	void (*mode_set)(struct intel_encoder *intel_encoder);
 	void (*disable)(struct intel_encoder *);
 	void (*post_disable)(struct intel_encoder *);
 	/* Read out the current hw state of this connector, returning true if
@@ -204,6 +189,8 @@ struct intel_crtc_config {
 	 * changes the crtc timings in the mode to prevent the crtc fixup from
 	 * overwriting them.  Currently only lvds needs that. */
 	bool timings_set;
+	/* Used by SDVO (and if we ever fix it, HDMI). */
+	unsigned pixel_multiplier;
 };
 
 struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f01063a..8f20eed 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -788,7 +788,6 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
 	v_sync_offset = mode->vsync_start - mode->vdisplay;
 
 	mode_clock = mode->clock;
-	mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
 	mode_clock /= 10;
 	dtd->part1.clock = mode_clock;
 
@@ -1039,12 +1038,12 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
 	return true;
 }
 
-static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode)
+static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
+				      struct intel_crtc_config *pipe_config)
 {
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-	int multiplier;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
 
 	/* We need to construct preferred input timings based on our
 	 * output timings.  To do that, we have to set the output
@@ -1071,8 +1070,9 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	/* Make the CRTC code factor in the SDVO pixel multiplier.  The
 	 * SDVO device will factor out the multiplier during mode_set.
 	 */
-	multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
-	intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
+	pipe_config->pixel_multiplier =
+		intel_sdvo_get_pixel_multiplier(adjusted_mode);
+	adjusted_mode->clock *= pipe_config->pixel_multiplier;
 
 	if (intel_sdvo->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -1089,19 +1089,19 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	return true;
 }
 
-static void intel_sdvo_mode_set(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
+static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_crtc *crtc = intel_encoder->base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&intel_encoder->base);
 	u32 sdvox;
 	struct intel_sdvo_in_out_map in_out;
 	struct intel_sdvo_dtd input_dtd, output_dtd;
-	int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 	int rate;
 
 	if (!mode)
@@ -1161,7 +1161,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 		DRM_INFO("Setting input timings on %s failed\n",
 			 SDVO_NAME(intel_sdvo));
 
-	switch (pixel_multiplier) {
+	switch (intel_crtc->config.pixel_multiplier) {
 	default:
 	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
 	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
@@ -1205,7 +1205,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
 		/* done in crtc_mode_set as it lives inside the dpll register */
 	} else {
-		sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+		sdvox |= (intel_crtc->config.pixel_multiplier - 1)
+			<< SDVO_PORT_MULTIPLY_SHIFT;
 	}
 
 	if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
@@ -2041,8 +2042,6 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-	.mode_fixup = intel_sdvo_mode_fixup,
-	.mode_set = intel_sdvo_mode_set,
 	.disable = intel_encoder_noop,
 };
 
@@ -2782,7 +2781,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
+	intel_encoder->compute_config = intel_sdvo_compute_config;
 	intel_encoder->disable = intel_disable_sdvo;
+	intel_encoder->mode_set = intel_sdvo_mode_set;
 	intel_encoder->enable = intel_enable_sdvo;
 	intel_encoder->get_hw_state = intel_sdvo_get_hw_state;
 
-- 
1.7.11.7




More information about the Intel-gfx mailing list