[Intel-gfx] [PATCH 7/8] drm/i915: Added debugfs support for PSR Status

Paulo Zanoni przanoni at gmail.com
Thu Feb 28 18:44:06 CET 2013


Hi

2013/2/25 Rodrigo Vivi <rodrigo.vivi at gmail.com>:
> Adding support for PSR Status, PSR entry counter and performance counters.
> Heavily based on initial work from Shobhit.
>
> Credits-by: Shobhit Kumar <shobhit.kumar at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 92 +++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_reg.h     | 24 ++++++++++
>  2 files changed, 116 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 7c65ab8..01021f6 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1680,6 +1680,97 @@ static int i915_dpio_info(struct seq_file *m, void *data)
>         return 0;
>  }
>
> +
> +static int i915_edp_psr_status(struct seq_file *m, void *data)
> +{
> +       struct drm_info_node *node = m->private;
> +       struct drm_device *dev = node->minor->dev;
> +       struct drm_i915_private *dev_priv = dev->dev_private;
> +       unsigned int count;
> +       u32 psrctl, psrstat, psrperf;
> +
> +       psrctl = I915_READ(EDP_PSR_CTL);
> +       seq_printf(m, "PSR Enabled: %s\n",
> +                  yesno(psrctl & EDP_PSR_ENABLE));
> +
> +       psrstat = I915_READ(EDP_PSR_STATUS_CTL);
> +
> +       seq_printf(m, "PSR Current State: ");
> +       switch (psrstat & EDP_PSR_STATUS_STATE_MASK) {
> +       case EDP_PSR_STATUS_STATE_IDLE:
> +               seq_printf(m, "Reset state\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_SRDONACK:
> +               seq_printf(m, "Wait for TG/Stream to send on frame of data after SRD conditions are met\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_SRDENT:
> +               seq_printf(m, "SRD entry\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_BUFOFF:
> +               seq_printf(m, "Wait for buffer turn off\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_BUFON:
> +                       seq_printf(m, "Wait for buffer turn on\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_AUXACK:
> +                       seq_printf(m, "Wait for AUX to acknowledge on SRD exit\n");
> +               break;
> +       case EDP_PSR_STATUS_STATE_SRDOFFACK:
> +                       seq_printf(m, "Wait for TG/Stream to acknowledge the SRD VDM exit\n");
> +               break;
> +       default:
> +               seq_printf(m, "Unknown\n");
> +               break;
> +       }
> +
> +       seq_printf(m, "Link Status: ");
> +       switch (psrstat & EDP_PSR_STATUS_LINK_MASK) {
> +       case EDP_PSR_STATUS_LINK_FULL_OFF:
> +               seq_printf(m, "Link is fully off\n");
> +               break;
> +       case EDP_PSR_STATUS_LINK_FULL_ON:
> +               seq_printf(m, "Link is fully on\n");
> +               break;
> +       case EDP_PSR_STATUS_LINK_STANDBY:
> +               seq_printf(m, "Link is in standby\n");
> +               break;
> +       default:
> +               seq_printf(m, "Unknown\n");
> +               break;
> +       }
> +
> +       seq_printf(m, "PSR Entry Count: %u\n",
> +                  psrstat >> EDP_PSR_STATUS_COUNT_SHIFT &
> +                  EDP_PSR_STATUS_COUNT_MASK);
> +
> +       seq_printf(m, "Max Sleep Timer Counter: %u\n",
> +                  psrstat >> EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT &
> +                  EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK);
> +
> +       seq_printf(m, "Had AUX error: %s\n",
> +                  yesno(psrstat & EDP_PSR_STATUS_AUX_ERROR));
> +
> +       seq_printf(m, "Sending AUX: %s\n",
> +                  yesno(psrstat & EDP_PSR_STATUS_AUX_SENDING));
> +
> +       seq_printf(m, "Sending Idle: %s\n",
> +                  yesno(psrstat & EDP_PSR_STATUS_SENDING_IDLE));
> +
> +       seq_printf(m, "Sending TP2 TP3: %s\n",
> +                  yesno(psrstat & EDP_PSR_STATUS_SENDING_TP2_TP3));
> +
> +       seq_printf(m, "Sending TP1: %s\n",
> +                  yesno(psrstat & EDP_PSR_STATUS_SENDING_TP1));
> +
> +       seq_printf(m, "Idle Count: %u\n",
> +                  psrstat & EDP_PSR_STATUS_IDLE_MASK);
> +
> +       psrperf = (I915_READ(EDP_PSR_PERF_CNT)) & EDP_PSR_PERF_CNT_MASK;
> +       seq_printf(m, "Performance Counter: %u\n", psrperf);
> +
> +       return 0;
> +}
> +
>  static ssize_t
>  i915_wedged_read(struct file *filp,
>                  char __user *ubuf,
> @@ -2249,6 +2340,7 @@ static struct drm_info_list i915_debugfs_list[] = {
>         {"i915_swizzle_info", i915_swizzle_info, 0},
>         {"i915_ppgtt_info", i915_ppgtt_info, 0},
>         {"i915_dpio", i915_dpio_info, 0},
> +       {"i915_edp_psr_status", i915_edp_psr_status, 0},
>  };
>  #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1e31f23..1f7e666 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1615,6 +1615,30 @@
>
>  #define EDP_PSR_STATUS_CTL                     0x64840
>  #define   EDP_PSR_STATUS_STATE_MASK            (7<<29)
> +#define   EDP_PSR_STATUS_STATE_IDLE            (0<<29)
> +#define   EDP_PSR_STATUS_STATE_SRDONACK                (1<<29)
> +#define   EDP_PSR_STATUS_STATE_SRDENT          (2<<29)
> +#define   EDP_PSR_STATUS_STATE_BUFOFF          (3<<29)
> +#define   EDP_PSR_STATUS_STATE_BUFON           (4<<29)
> +#define   EDP_PSR_STATUS_STATE_AUXACK          (5<<29)
> +#define   EDP_PSR_STATUS_STATE_SRDOFFACK       (6<<29)
> +#define   EDP_PSR_STATUS_LINK_MASK             (3<<29)
> +#define   EDP_PSR_STATUS_LINK_FULL_OFF         (0<<29)
> +#define   EDP_PSR_STATUS_LINK_FULL_ON          (1<<29)
> +#define   EDP_PSR_STATUS_LINK_STANDBY          (2<<29)

The 4 lines above are wrong. It's (x<<26).

> +#define   EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT         20
> +#define   EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK  0x1f
> +#define   EDP_PSR_STATUS_COUNT_SHIFT           16
> +#define   EDP_PSR_STATUS_COUNT_MASK            0xf
> +#define   EDP_PSR_STATUS_AUX_ERROR             (1<<15)
> +#define   EDP_PSR_STATUS_AUX_SENDING           (1<<12)
> +#define   EDP_PSR_STATUS_SENDING_IDLE          (1<<9)
> +#define   EDP_PSR_STATUS_SENDING_TP2_TP3       (1<<8)
> +#define   EDP_PSR_STATUS_SENDING_TP1           (1<<4)
> +#define   EDP_PSR_STATUS_IDLE_MASK             0xf
> +
> +#define EDP_PSR_PERF_CNT               0x64844
> +#define   EDP_PSR_PERF_CNT_MASK                0xffffff
>
>  #define EDP_PSR_DEBUG_CTL              0x64860
>  #define   EDP_PSR_DEBUG_MASK_MEMUP     (1<<26)
> --
> 1.8.1.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni



More information about the Intel-gfx mailing list