[Intel-gfx] Regression due to: drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13
Joseph Salisbury
joseph.salisbury at canonical.com
Mon Jan 7 21:53:17 CET 2013
On 01/07/2013 04:36 AM, Daniel Vetter wrote:
> On Mon, Jan 07, 2013 at 10:12:12AM +0100, Sjoerd Simons wrote:
>> On Sun, 2013-01-06 at 22:13 +0100, Daniel Vetter wrote:
>>> Now with the intel-gfx m-l address fixed ...
>>> -Daniel
>>>
>>> On Sun, Jan 6, 2013 at 10:13 PM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
>>>> Hi all,
>>>>
>>>> Looks ugly, and the original commit doesn't have any link to the
>>>> dmidecode information. Sjoerd&John, can you both please attach the
>>>> output of dmidecode? If we're lucky, we can differentiate the two
>>>> models somehow, if not we need to revert this patch, since regressions
>>>> win over simple bugs.
>> Mine is attached, unfortunately the only interesting difference seems to
>> be the Base board serial number:
>> - Serial Number: /sku
>> + Serial Number: XXXXXXXX
>>
>> But given we both have an ID12 that's most likely not very relevant (or
>> maybe different bios versions do different amounts of setup on the hdmi
>> bridge).
>>
>> Even though i did some attempts i've never seen the hdmi output work in
>> linux (and didn't know it was attached to LVDS). John did mention it
>> only works up to 720p, so it could very well be i simply never send it a
>> mode it actually supports.
>>
>> Reverting this patch will cause a regression in that the higher levels,
>> e.g. X, always thinks there is an output on the LVDS port so it comes up
>> in a very odd mode (but at least one can work around that with
>> configuration), so i guess the patch should be reverted :/
>>
>> Ideally we'd find a way to do hotplug detection on the lvds-to-hdmi
>> bridge (any ideas where to look for that would be much appreciated).
> Unfortunately I have no clue (nor docs) how lvds->hdmi chains are supposed
> to work. For real hdmi support we'd need a few things at least:
> - some way to set up infoframes
> - some way to switch between single-link and dual-link lvds modes (for the
> higher resolutions)
> - some way to do hotplug detection (I guess we could use polling on the
> i2c pins as a fallback)
>
> All this needs a new hdmi_on_lvds encoder/connector with relevant code,
> plus a way to figure out whether we need this (either with a quirk table
> or by looking at some magic vbt value I'm not aware of).
>
> In short: Tons of work to make this work, and very unlikely that we'll get
> around to it. If you're bored though I could give you some ideas though on
> the #intel-gfx irc channel.
>
> I've reverted the quirk entry to fix the regression.
>
> Cheers, Daniel
>
>
>>>> Yours, Daniel
>>>>
>>>> On Tue, Dec 25, 2012 at 12:39 PM, John Tapsell <johnflux at gmail.com> wrote:
>>>>> I have a Zotac ZDBOX SD ID12 and the following commit means that I no
>>>>> longer have HDMI output.
>>>>>
>>>>> I've been told that I have a lvds-to-hdmi bridge, so this commit broke that.
>>>>>
>>>>> Commit:
>>>>>
>>>>> drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13
>>>>>
>>>>> BugLink: https://bugs.launchpad.net/bugs/1064924
>>>>>
>>>>> This box claims to have an LVDS interface but doesn't
>>>>> actually have one.
>>>>>
>>>>> Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
>>>>> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>>>>> (cherry picked from commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364)
>>>>>
>>>>> Signed-off-by: Joseph Salisbury <joseph.salisbury at canonical.com>
>>>>> Signed-off-by: Tim Gardner <tim.gardner at canonical.com>
>>>>
>>>>
>>>> --
>>>> Daniel Vetter
>>>> Software Engineer, Intel Corporation
>>>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>>>
>>>
>>
>> # dmidecode 2.11
>> SMBIOS 2.6 present.
>> 22 structures occupying 1065 bytes.
>> Table at 0x000FB9E0.
>>
>> Handle 0x0000, DMI type 0, 24 bytes
>> BIOS Information
>> Vendor: American Megatrends Inc.
>> Version: 080016
>> Release Date: 12/23/2010
>> Address: 0xF0000
>> Runtime Size: 64 kB
>> ROM Size: 1024 kB
>> Characteristics:
>> ISA is supported
>> PCI is supported
>> PNP is supported
>> BIOS is upgradeable
>> BIOS shadowing is allowed
>> ESCD support is available
>> Boot from CD is supported
>> Selectable boot is supported
>> BIOS ROM is socketed
>> EDD is supported
>> 5.25"/1.2 MB floppy services are supported (int 13h)
>> 3.5"/720 kB floppy services are supported (int 13h)
>> 3.5"/2.88 MB floppy services are supported (int 13h)
>> Print screen service is supported (int 5h)
>> 8042 keyboard services are supported (int 9h)
>> Serial services are supported (int 14h)
>> Printer services are supported (int 17h)
>> CGA/mono video services are supported (int 10h)
>> ACPI is supported
>> USB legacy is supported
>> LS-120 boot is supported
>> ATAPI Zip drive boot is supported
>> BIOS boot specification is supported
>> Targeted content distribution is supported
>> BIOS Revision: 8.16
>>
>> Handle 0x0001, DMI type 1, 27 bytes
>> System Information
>> Manufacturer: ZOTAC
>> Product Name: ZBOXSD-ID12/ID13
>> Version: XX
>> Serial Number: GXXXX160XXXXX
>> UUID: 03000200-0400-0500-0006-000700080009
>> Wake-up Type: Power Switch
>> SKU Number: NA
>> Family: NA
>>
>> Handle 0x0002, DMI type 2, 15 bytes
>> Base Board Information
>> Manufacturer: ZOTAC
>> Product Name: ZBOXSD-ID12/ID13
>> Version: XX
>> Serial Number: XXXXXXXX
>> Asset Tag: NA
>> Features:
>> Board is a hosting board
>> Board is replaceable
>> Location In Chassis: NA
>> Chassis Handle: 0x0003
>> Type: Motherboard
>> Contained Object Handles: 0
>>
>> Handle 0x0003, DMI type 3, 21 bytes
>> Chassis Information
>> Manufacturer: To Be Filled By O.E.M.
>> Type: Desktop
>> Lock: Not Present
>> Version: To Be Filled By O.E.M.
>> Serial Number: To Be Filled By O.E.M.
>> Asset Tag: To Be Filled By O.E.M.
>> Boot-up State: Safe
>> Power Supply State: Safe
>> Thermal State: Safe
>> Security Status: None
>> OEM Information: 0x00000000
>> Height: Unspecified
>> Number Of Power Cords: 1
>> Contained Elements: 0
>>
>> Handle 0x0004, DMI type 4, 42 bytes
>> Processor Information
>> Socket Designation: CPU 1
>> Type: Central Processor
>> Family: Atom
>> Manufacturer: Intel
>> ID: CA 06 01 00 FF FB EB BF
>> Signature: Type 0, Family 6, Model 28, Stepping 10
>> Flags:
>> FPU (Floating-point unit on-chip)
>> VME (Virtual mode extension)
>> DE (Debugging extension)
>> PSE (Page size extension)
>> TSC (Time stamp counter)
>> MSR (Model specific registers)
>> PAE (Physical address extension)
>> MCE (Machine check exception)
>> CX8 (CMPXCHG8 instruction supported)
>> APIC (On-chip APIC hardware supported)
>> SEP (Fast system call)
>> MTRR (Memory type range registers)
>> PGE (Page global enable)
>> MCA (Machine check architecture)
>> CMOV (Conditional move instruction supported)
>> PAT (Page attribute table)
>> PSE-36 (36-bit page size extension)
>> CLFSH (CLFLUSH instruction supported)
>> DS (Debug store)
>> ACPI (ACPI supported)
>> MMX (MMX technology supported)
>> FXSR (FXSAVE and FXSTOR instructions supported)
>> SSE (Streaming SIMD extensions)
>> SSE2 (Streaming SIMD extensions 2)
>> SS (Self-snoop)
>> HTT (Multi-threading)
>> TM (Thermal monitor supported)
>> PBE (Pending break enabled)
>> Version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz
>> Voltage: 1.1 V
>> External Clock: 200 MHz
>> Max Speed: 1800 MHz
>> Current Speed: 1800 MHz
>> Status: Populated, Enabled
>> Upgrade: Socket LGA775
>> L1 Cache Handle: 0x0005
>> L2 Cache Handle: 0x0006
>> L3 Cache Handle: Not Provided
>> Serial Number: To Be Filled By O.E.M.
>> Asset Tag: To Be Filled By O.E.M.
>> Part Number: To Be Filled By O.E.M.
>> Core Count: 2
>> Core Enabled: 2
>> Thread Count: 4
>> Characteristics:
>> 64-bit capable
>>
>> Handle 0x0005, DMI type 7, 19 bytes
>> Cache Information
>> Socket Designation: L1-Cache
>> Configuration: Enabled, Not Socketed, Level 1
>> Operational Mode: Write Back
>> Location: Internal
>> Installed Size: 48 kB
>> Maximum Size: 48 kB
>> Supported SRAM Types:
>> Other
>> Installed SRAM Type: Other
>> Speed: Unknown
>> Error Correction Type: Parity
>> System Type: Data
>> Associativity: Other
>>
>> Handle 0x0006, DMI type 7, 19 bytes
>> Cache Information
>> Socket Designation: L2-Cache
>> Configuration: Enabled, Not Socketed, Level 2
>> Operational Mode: Write Back
>> Location: Internal
>> Installed Size: 1024 kB
>> Maximum Size: 1024 kB
>> Supported SRAM Types:
>> Other
>> Installed SRAM Type: Other
>> Speed: Unknown
>> Error Correction Type: Single-bit ECC
>> System Type: Unified
>> Associativity: 8-way Set-associative
>>
>> Handle 0x0007, DMI type 5, 20 bytes
>> Memory Controller Information
>> Error Detecting Method: 64-bit ECC
>> Error Correcting Capabilities:
>> None
>> Supported Interleave: One-way Interleave
>> Current Interleave: One-way Interleave
>> Maximum Memory Module Size: 4096 MB
>> Maximum Total Memory Size: 8192 MB
>> Supported Speeds:
>> Other
>> Supported Memory Types:
>> DIMM
>> SDRAM
>> Memory Module Voltage: 3.3 V
>> Associated Memory Slots: 2
>> 0x0008
>> 0x0009
>> Enabled Error Correcting Capabilities:
>> None
>>
>> Handle 0x0008, DMI type 6, 12 bytes
>> Memory Module Information
>> Socket Designation: DIMM0
>> Bank Connections: 0 1
>> Current Speed: Unknown
>> Type: DIMM SDRAM
>> Installed Size: 1024 MB (Single-bank Connection)
>> Enabled Size: 1024 MB (Single-bank Connection)
>> Error Status: OK
>>
>> Handle 0x0009, DMI type 6, 12 bytes
>> Memory Module Information
>> Socket Designation: DIMM1
>> Bank Connections: 2 3
>> Current Speed: Unknown
>> Type: DIMM SDRAM
>> Installed Size: Not Installed
>> Enabled Size: Not Installed
>> Error Status: OK
>>
>> Handle 0x000A, DMI type 13, 22 bytes
>> BIOS Language Information
>> Language Description Format: Long
>> Installable Languages: 1
>> en|US|iso8859-1
>> Currently Installed Language: en|US|iso8859-1
>>
>> Handle 0x000B, DMI type 15, 35 bytes
>> System Event Log
>> Area Length: 4 bytes
>> Header Start Offset: 0x0000
>> Header Length: 2 bytes
>> Data Start Offset: 0x0002
>> Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
>> Access Address: Index 0x046A, Data 0x046C
>> Status: Invalid, Not Full
>> Change Token: 0x00000000
>> Header Format: No Header
>> Supported Log Type Descriptors: 6
>> Descriptor 1: End of log
>> Data Format 1: OEM-specific
>> Descriptor 2: End of log
>> Data Format 2: OEM-specific
>> Descriptor 3: End of log
>> Data Format 3: OEM-specific
>> Descriptor 4: End of log
>> Data Format 4: OEM-specific
>> Descriptor 5: End of log
>> Data Format 5: OEM-specific
>> Descriptor 6: End of log
>> Data Format 6: OEM-specific
>>
>> Handle 0x000C, DMI type 16, 15 bytes
>> Physical Memory Array
>> Location: System Board Or Motherboard
>> Use: System Memory
>> Error Correction Type: None
>> Maximum Capacity: 4 GB
>> Error Information Handle: Not Provided
>> Number Of Devices: 2
>>
>> Handle 0x000D, DMI type 19, 15 bytes
>> Memory Array Mapped Address
>> Starting Address: 0x00000000000
>> Ending Address: 0x0003FFFFFFF
>> Range Size: 1 GB
>> Physical Array Handle: 0x000C
>> Partition Width: 4
>>
>> Handle 0x000E, DMI type 17, 28 bytes
>> Memory Device
>> Array Handle: 0x000C
>> Error Information Handle: Not Provided
>> Total Width: 64 bits
>> Data Width: 64 bits
>> Size: 1024 MB
>> Form Factor: SODIMM
>> Set: None
>> Locator: DIMM0
>> Bank Locator: BANK0
>> Type: DDR2
>> Type Detail: Synchronous
>> Speed: 800 MHz
>> Manufacturer: Manufacturer00
>> Serial Number: SerNum00
>> Asset Tag: AssetTagNum0
>> Part Number: ModulePartNumber00
>> Rank: Unknown
>>
>> Handle 0x000F, DMI type 20, 19 bytes
>> Memory Device Mapped Address
>> Starting Address: 0x00000000000
>> Ending Address: 0x0003FFFFFFF
>> Range Size: 1 GB
>> Physical Device Handle: 0x000E
>> Memory Array Mapped Address Handle: 0x000D
>> Partition Row Position: 1
>> Interleaved Data Depth: 1
>>
>> Handle 0x0010, DMI type 17, 28 bytes
>> Memory Device
>> Array Handle: 0x000C
>> Error Information Handle: Not Provided
>> Total Width: Unknown
>> Data Width: Unknown
>> Size: No Module Installed
>> Form Factor: DIMM
>> Set: None
>> Locator: DIMM1
>> Bank Locator: BANK1
>> Type: Unknown
>> Type Detail: Unknown
>> Speed: Unknown
>> Manufacturer: Manufacturer01
>> Serial Number: SerNum01
>> Asset Tag: AssetTagNum1
>> Part Number: ModulePartNumber01
>> Rank: Unknown
>>
>> Handle 0x0011, DMI type 20, 19 bytes
>> Memory Device Mapped Address
>> Starting Address: 0x00000000000
>> Ending Address: 0x000000003FF
>> Range Size: 1 kB
>> Physical Device Handle: 0x0010
>> Memory Array Mapped Address Handle: 0x000D
>> Partition Row Position: 1
>> Interleaved Data Depth: 1
>>
>> Handle 0x0012, DMI type 32, 20 bytes
>> System Boot Information
>> Status: No errors detected
>>
>> Handle 0x0013, DMI type 41, 11 bytes
>> Onboard Device
>> Reference Designation: To Be Filled By O.E.M.
>> Type: Video
>> Status: Enabled
>> Type Instance: 0
>>
>> Handle 0x0014, DMI type 41, 11 bytes
>> Onboard Device
>> Reference Designation: To Be Filled By O.E.M.
>> Type: SCSI Controller
>> Status: Disabled
>> Type Instance: 0
>>
>> Handle 0x0015, DMI type 127, 4 bytes
>> End Of Table
>>
>
I created an Ubuntu Quantal test kernel with upstream commit 9756fe3
reverted(It is commit 47f80be7 in the Ubuntu source tree).
The test kernel can be downloaded from:
http://people.canonical.com/~jsalisbury/lp1064924
It would be helpful if folks affected by the regression in Ubuntu can
test that kernel and confirm it fixes the regression? Please be sure to
install both the linux-image and linux-image-extra .deb packages.
Thanks,
Joe
More information about the Intel-gfx
mailing list