[Intel-gfx] [PATCH 05/26] drm/i915: panel power sequencing for VLV eDP

Jani Nikula jani.nikula at linux.intel.com
Fri Mar 8 14:51:44 CET 2013


On Sat, 02 Mar 2013, Jesse Barnes <jbarnes at virtuousgeek.org> wrote:
> PPS register offsets have changed in Valleyview.
>
> Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
> Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
> Signed-off-by: Ben Widawsky <benjamin.widawsky at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |    9 ++
>  drivers/gpu/drm/i915/intel_display.c |    1 -
>  drivers/gpu/drm/i915/intel_dp.c      |  171 ++++++++++++++++++++++++----------
>  3 files changed, 132 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b0124e3..766518b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4132,6 +4132,15 @@
>  #define PIPEB_PP_OFF_DELAYS     (VLV_DISPLAY_BASE + 0x6130c)
>  #define PIPEB_PP_DIVISOR        (VLV_DISPLAY_BASE + 0x61310)
>  
> +#define VLV_PIPE_PP_STATUS(pipe) _PIPE(pipe, PIPEA_PP_STATUS, PIPEB_PP_STATUS)
> +#define VLV_PIPE_PP_CONTROL(pipe) _PIPE(pipe, PIPEA_PP_CONTROL, PIPEB_PP_CONTROL)
> +#define VLV_PIPE_PP_ON_DELAYS(pipe) \
> +		_PIPE(pipe, PIPEA_PP_ON_DELAYS, PIPEB_PP_ON_DELAYS)
> +#define VLV_PIPE_PP_OFF_DELAYS(pipe) \
> +		_PIPE(pipe, PIPEA_PP_OFF_DELAYS, PIPEB_PP_OFF_DELAYS)
> +#define VLV_PIPE_PP_DIVISOR(pipe) \
> +		_PIPE(pipe, PIPEA_PP_DIVISOR, PIPEB_PP_DIVISOR)
> +
>  #define PCH_PP_STATUS		0xc7200
>  #define PCH_PP_CONTROL		0xc7204
>  #define  PANEL_UNLOCK_REGS	(0xabcd << 16)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index cb4ecad..3b189fa 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8551,7 +8551,6 @@ static void intel_setup_outputs(struct drm_device *dev)
>  			if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
>  				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
>  		}
> -
>  		if (I915_READ(VLV_DISPLAY_BASE + SDVOC) & PORT_DETECTED)
>  			intel_hdmi_init(dev, VLV_DISPLAY_BASE + SDVOC, PORT_C);
>  	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 2903380..68d238d 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -294,16 +294,20 @@ static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
>  {
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 pp_stat_reg;
>  
> -	return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
> +	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
> +	return (I915_READ(pp_stat_reg) & PP_ON) != 0;
>  }
>  
>  static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
>  {
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 pp_ctrl_reg;
>  
> -	return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +	return (I915_READ(pp_ctrl_reg) & EDP_FORCE_VDD) != 0;
>  }
>  
>  static void
> @@ -311,14 +315,19 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
>  {
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 pp_stat_reg, pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> +
> +	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
>  	if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
>  		WARN(1, "eDP powered off while attempting aux channel communication.\n");
>  		DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
> -			      I915_READ(PCH_PP_STATUS),
> -			      I915_READ(PCH_PP_CONTROL));
> +				I915_READ(pp_stat_reg),
> +				I915_READ(pp_ctrl_reg));
>  	}
>  }
>  
> @@ -986,16 +995,20 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
>  {
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 pp_stat_reg, pp_ctrl_reg;
> +
> +	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
>  
>  	DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
> -		      mask, value,
> -		      I915_READ(PCH_PP_STATUS),
> -		      I915_READ(PCH_PP_CONTROL));
> +			mask, value,
> +			I915_READ(pp_stat_reg),
> +			I915_READ(pp_ctrl_reg));
>  
> -	if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
> +	if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
>  		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
> -			  I915_READ(PCH_PP_STATUS),
> -			  I915_READ(PCH_PP_CONTROL));
> +				I915_READ(pp_stat_reg),
> +				I915_READ(pp_ctrl_reg));
>  	}
>  }
>  
> @@ -1022,9 +1035,15 @@ static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
>   * is locked
>   */
>  
> -static  u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
> +static  u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
>  {
> -	u32	control = I915_READ(PCH_PP_CONTROL);
> +	struct drm_device *dev = intel_dp_to_dev(intel_dp);
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 control;
> +	u32 pp_ctrl_reg;
> +
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +	control = I915_READ(pp_ctrl_reg);
>  
>  	control &= ~PANEL_UNLOCK_MASK;
>  	control |= PANEL_UNLOCK_REGS;
> @@ -1036,6 +1055,7 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp;
> +	u32 pp_stat_reg, pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> @@ -1054,13 +1074,16 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
>  	if (!ironlake_edp_have_panel_power(intel_dp))
>  		ironlake_wait_panel_power_cycle(intel_dp);
>  
> -	pp = ironlake_get_pp_control(dev_priv);
> +	pp = ironlake_get_pp_control(intel_dp);
>  	pp |= EDP_FORCE_VDD;
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> -	POSTING_READ(PCH_PP_CONTROL);
> -	DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
> -		      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
>  
> +	pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +	I915_WRITE(pp_ctrl_reg, pp);
> +	POSTING_READ(pp_ctrl_reg);
> +	DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
> +			I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
>  	/*
>  	 * If the panel wasn't on, delay before accessing aux channel
>  	 */
> @@ -1075,19 +1098,23 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp;
> +	u32 pp_stat_reg, pp_ctrl_reg;
>  
>  	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
>  
>  	if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
> -		pp = ironlake_get_pp_control(dev_priv);
> +		pp = ironlake_get_pp_control(intel_dp);
>  		pp &= ~EDP_FORCE_VDD;
> -		I915_WRITE(PCH_PP_CONTROL, pp);
> -		POSTING_READ(PCH_PP_CONTROL);
>  
> -		/* Make sure sequencer is idle before allowing subsequent activity */
> -		DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
> -			      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
> +		pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
> +		pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +		I915_WRITE(pp_ctrl_reg, pp);
> +		POSTING_READ(pp_ctrl_reg);
>  
> +		/* Make sure sequencer is idle before allowing subsequent activity */
> +		DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
> +		I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
>  		msleep(intel_dp->panel_power_down_delay);
>  	}
>  }
> @@ -1131,6 +1158,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp;
> +	u32 pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> @@ -1144,7 +1172,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
>  
>  	ironlake_wait_panel_power_cycle(intel_dp);
>  
> -	pp = ironlake_get_pp_control(dev_priv);
> +	pp = ironlake_get_pp_control(intel_dp);
>  	if (IS_GEN5(dev)) {
>  		/* ILK workaround: disable reset around power sequence */
>  		pp &= ~PANEL_POWER_RESET;
> @@ -1156,8 +1184,10 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
>  	if (!IS_GEN5(dev))
>  		pp |= PANEL_POWER_RESET;
>  
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> -	POSTING_READ(PCH_PP_CONTROL);
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +	I915_WRITE(pp_ctrl_reg, pp);
> +	POSTING_READ(pp_ctrl_reg);
>  
>  	ironlake_wait_panel_on(intel_dp);
>  
> @@ -1173,6 +1203,7 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp;
> +	u32 pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> @@ -1181,12 +1212,15 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
>  
>  	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
>  
> -	pp = ironlake_get_pp_control(dev_priv);
> +	pp = ironlake_get_pp_control(intel_dp);
>  	/* We need to switch off panel power _and_ force vdd, for otherwise some
>  	 * panels get very unhappy and cease to work. */
>  	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> -	POSTING_READ(PCH_PP_CONTROL);
> +
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +	I915_WRITE(pp_ctrl_reg, pp);
> +	POSTING_READ(pp_ctrl_reg);
>  
>  	intel_dp->want_panel_vdd = false;
>  
> @@ -1200,6 +1234,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	int pipe = to_intel_crtc(intel_dig_port->base.base.crtc)->pipe;
>  	u32 pp;
> +	u32 pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> @@ -1212,10 +1247,13 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
>  	 * allowing it to appear.
>  	 */
>  	msleep(intel_dp->backlight_on_delay);
> -	pp = ironlake_get_pp_control(dev_priv);
> +	pp = ironlake_get_pp_control(intel_dp);
>  	pp |= EDP_BLC_ENABLE;
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> -	POSTING_READ(PCH_PP_CONTROL);
> +
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +	I915_WRITE(pp_ctrl_reg, pp);
> +	POSTING_READ(pp_ctrl_reg);
>  
>  	intel_panel_enable_backlight(dev, pipe);
>  }
> @@ -1225,6 +1263,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp;
> +	u32 pp_ctrl_reg;
>  
>  	if (!is_edp(intel_dp))
>  		return;
> @@ -1232,10 +1271,13 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
>  	intel_panel_disable_backlight(dev);
>  
>  	DRM_DEBUG_KMS("\n");
> -	pp = ironlake_get_pp_control(dev_priv);
> +	pp = ironlake_get_pp_control(intel_dp);
>  	pp &= ~EDP_BLC_ENABLE;
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> -	POSTING_READ(PCH_PP_CONTROL);
> +
> +	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
> +
> +	I915_WRITE(pp_ctrl_reg, pp);
> +	POSTING_READ(pp_ctrl_reg);
>  	msleep(intel_dp->backlight_off_delay);
>  }
>  
> @@ -2617,15 +2659,33 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct edp_power_seq cur, vbt, spec, final;
>  	u32 pp_on, pp_off, pp_div, pp;
> +	int pp_control_reg, pp_on_reg, pp_off_reg, pp_div_reg;
> +
> +	if (HAS_PCH_SPLIT(dev)) {
> +		pp_control_reg = PCH_PP_CONTROL;
> +		pp_on_reg = PCH_PP_ON_DELAYS;
> +		pp_off_reg = PCH_PP_OFF_DELAYS;
> +		pp_div_reg = PCH_PP_DIVISOR;
> +	} else if (IS_VALLEYVIEW(dev)) {
> +		pp_control_reg = PIPEA_PP_CONTROL;
> +		pp_on_reg = PIPEA_PP_ON_DELAYS;
> +		pp_off_reg = PIPEA_PP_OFF_DELAYS;
> +		pp_div_reg = PIPEA_PP_DIVISOR;
> +	} else {
> +		pp_control_reg = PP_CONTROL;
> +		pp_on_reg = PP_ON_DELAYS;
> +		pp_off_reg = PP_OFF_DELAYS;
> +		pp_div_reg = PP_DIVISOR;
> +	}

Is this else branch needed? ironlake_get_pp_control() does not support
pre-pch split hw either. Does pre-pch split hw support edp?

>  
>  	/* Workaround: Need to write PP_CONTROL with the unlock key as
>  	 * the very first thing. */
> -	pp = ironlake_get_pp_control(dev_priv);
> -	I915_WRITE(PCH_PP_CONTROL, pp);
> +	pp = ironlake_get_pp_control(intel_dp);
> +	I915_WRITE(pp_control_reg, pp);
>  
> -	pp_on = I915_READ(PCH_PP_ON_DELAYS);
> -	pp_off = I915_READ(PCH_PP_OFF_DELAYS);
> -	pp_div = I915_READ(PCH_PP_DIVISOR);
> +	pp_on = I915_READ(pp_on_reg);
> +	pp_off = I915_READ(pp_off_reg);
> +	pp_div = I915_READ(pp_div_reg);
>  
>  	/* Pull timing values out of registers */
>  	cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
> @@ -2701,6 +2761,22 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 pp_on, pp_off, pp_div;
> +	int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
> +	int pp_on_reg, pp_off_reg, pp_div_reg;
> +
> +	if (HAS_PCH_SPLIT(dev)) {
> +		pp_on_reg = PCH_PP_ON_DELAYS;
> +		pp_off_reg = PCH_PP_OFF_DELAYS;
> +		pp_div_reg = PCH_PP_DIVISOR;
> +	} else if (IS_VALLEYVIEW(dev)) {
> +		pp_on_reg = PIPEA_PP_ON_DELAYS;
> +		pp_off_reg = PIPEA_PP_OFF_DELAYS;
> +		pp_div_reg = PIPEA_PP_DIVISOR;
> +	} else {
> +		pp_on_reg = PP_ON_DELAYS;
> +		pp_off_reg = PP_OFF_DELAYS;
> +		pp_div_reg = PP_DIVISOR;
> +	}

Ditto here.

Jani.

>  
>  	/* And finally store the new values in the power sequencer. */
>  	pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
> @@ -2709,8 +2785,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>  		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
>  	/* Compute the divisor for the pp clock, simply match the Bspec
>  	 * formula. */
> -	pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
> -			<< PP_REFERENCE_DIVIDER_SHIFT;
> +	pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
>  	pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
>  			<< PANEL_POWER_CYCLE_DELAY_SHIFT);
>  
> @@ -2723,14 +2798,14 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>  			pp_on |= PANEL_POWER_PORT_DP_D;
>  	}
>  
> -	I915_WRITE(PCH_PP_ON_DELAYS, pp_on);
> -	I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
> -	I915_WRITE(PCH_PP_DIVISOR, pp_div);
> +	I915_WRITE(pp_on_reg, pp_on);
> +	I915_WRITE(pp_off_reg, pp_off);
> +	I915_WRITE(pp_div_reg, pp_div);
>  
>  	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
> -		      I915_READ(PCH_PP_ON_DELAYS),
> -		      I915_READ(PCH_PP_OFF_DELAYS),
> -		      I915_READ(PCH_PP_DIVISOR));
> +		      I915_READ(pp_on_reg),
> +		      I915_READ(pp_off_reg),
> +		      I915_READ(pp_div_reg));
>  }
>  
>  void
> -- 
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



More information about the Intel-gfx mailing list