[Intel-gfx] [PATCH 4/4] drm/i915: extract intel_pll.c from intel_display.c
Paulo Zanoni
przanoni at gmail.com
Wed Apr 9 23:44:33 CEST 2014
From: Paulo Zanoni <paulo.r.zanoni at intel.com>
Since intel_display.c is way too big for our little heads.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/intel_display.c | 1902 +---------------------------------
drivers/gpu/drm/i915/intel_drv.h | 77 +-
drivers/gpu/drm/i915/intel_panel.c | 36 +
drivers/gpu/drm/i915/intel_pll.c | 1779 +++++++++++++++++++++++++++++++
5 files changed, 1930 insertions(+), 1865 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_pll.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 8e022cc..25e86ad 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -40,6 +40,7 @@ i915-y += intel_bios.o \
intel_fdi.o \
intel_modes.o \
intel_overlay.o \
+ intel_pll.o \
intel_sideband.o \
intel_sprite.o
i915-$(CONFIG_ACPI) += intel_acpi.o intel_opregion.o
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e23ca4b..3590130 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -41,13 +41,6 @@
#include <drm/drm_crtc_helper.h>
#include <linux/dma_remapping.h>
-static void intel_increase_pllclock(struct drm_crtc *crtc);
-
-static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
- struct intel_crtc_config *pipe_config);
-static void ironlake_pch_clock_get(struct intel_crtc *crtc,
- struct intel_crtc_config *pipe_config);
-
static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
int x, int y, struct drm_framebuffer *old_fb);
static int intel_framebuffer_init(struct drm_device *dev,
@@ -55,21 +48,6 @@ static int intel_framebuffer_init(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_i915_gem_object *obj);
-typedef struct {
- int min, max;
-} intel_range_t;
-
-typedef struct {
- int dot_limit;
- int p2_slow, p2_fast;
-} intel_p2_t;
-
-typedef struct intel_limit intel_limit_t;
-struct intel_limit {
- intel_range_t dot, vco, n, m, m1, m2, p, p1;
- intel_p2_t p2;
-};
-
int
intel_pch_rawclk(struct drm_device *dev)
{
@@ -80,253 +58,6 @@ intel_pch_rawclk(struct drm_device *dev)
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
-static const intel_limit_t intel_limits_i8xx_dac = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 908000, .max = 1512000 },
- .n = { .min = 2, .max = 16 },
- .m = { .min = 96, .max = 140 },
- .m1 = { .min = 18, .max = 26 },
- .m2 = { .min = 6, .max = 16 },
- .p = { .min = 4, .max = 128 },
- .p1 = { .min = 2, .max = 33 },
- .p2 = { .dot_limit = 165000,
- .p2_slow = 4, .p2_fast = 2 },
-};
-
-static const intel_limit_t intel_limits_i8xx_dvo = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 908000, .max = 1512000 },
- .n = { .min = 2, .max = 16 },
- .m = { .min = 96, .max = 140 },
- .m1 = { .min = 18, .max = 26 },
- .m2 = { .min = 6, .max = 16 },
- .p = { .min = 4, .max = 128 },
- .p1 = { .min = 2, .max = 33 },
- .p2 = { .dot_limit = 165000,
- .p2_slow = 4, .p2_fast = 4 },
-};
-
-static const intel_limit_t intel_limits_i8xx_lvds = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 908000, .max = 1512000 },
- .n = { .min = 2, .max = 16 },
- .m = { .min = 96, .max = 140 },
- .m1 = { .min = 18, .max = 26 },
- .m2 = { .min = 6, .max = 16 },
- .p = { .min = 4, .max = 128 },
- .p1 = { .min = 1, .max = 6 },
- .p2 = { .dot_limit = 165000,
- .p2_slow = 14, .p2_fast = 7 },
-};
-
-static const intel_limit_t intel_limits_i9xx_sdvo = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1400000, .max = 2800000 },
- .n = { .min = 1, .max = 6 },
- .m = { .min = 70, .max = 120 },
- .m1 = { .min = 8, .max = 18 },
- .m2 = { .min = 3, .max = 7 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8 },
- .p2 = { .dot_limit = 200000,
- .p2_slow = 10, .p2_fast = 5 },
-};
-
-static const intel_limit_t intel_limits_i9xx_lvds = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1400000, .max = 2800000 },
- .n = { .min = 1, .max = 6 },
- .m = { .min = 70, .max = 120 },
- .m1 = { .min = 8, .max = 18 },
- .m2 = { .min = 3, .max = 7 },
- .p = { .min = 7, .max = 98 },
- .p1 = { .min = 1, .max = 8 },
- .p2 = { .dot_limit = 112000,
- .p2_slow = 14, .p2_fast = 7 },
-};
-
-
-static const intel_limit_t intel_limits_g4x_sdvo = {
- .dot = { .min = 25000, .max = 270000 },
- .vco = { .min = 1750000, .max = 3500000},
- .n = { .min = 1, .max = 4 },
- .m = { .min = 104, .max = 138 },
- .m1 = { .min = 17, .max = 23 },
- .m2 = { .min = 5, .max = 11 },
- .p = { .min = 10, .max = 30 },
- .p1 = { .min = 1, .max = 3},
- .p2 = { .dot_limit = 270000,
- .p2_slow = 10,
- .p2_fast = 10
- },
-};
-
-static const intel_limit_t intel_limits_g4x_hdmi = {
- .dot = { .min = 22000, .max = 400000 },
- .vco = { .min = 1750000, .max = 3500000},
- .n = { .min = 1, .max = 4 },
- .m = { .min = 104, .max = 138 },
- .m1 = { .min = 16, .max = 23 },
- .m2 = { .min = 5, .max = 11 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8},
- .p2 = { .dot_limit = 165000,
- .p2_slow = 10, .p2_fast = 5 },
-};
-
-static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
- .dot = { .min = 20000, .max = 115000 },
- .vco = { .min = 1750000, .max = 3500000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 104, .max = 138 },
- .m1 = { .min = 17, .max = 23 },
- .m2 = { .min = 5, .max = 11 },
- .p = { .min = 28, .max = 112 },
- .p1 = { .min = 2, .max = 8 },
- .p2 = { .dot_limit = 0,
- .p2_slow = 14, .p2_fast = 14
- },
-};
-
-static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
- .dot = { .min = 80000, .max = 224000 },
- .vco = { .min = 1750000, .max = 3500000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 104, .max = 138 },
- .m1 = { .min = 17, .max = 23 },
- .m2 = { .min = 5, .max = 11 },
- .p = { .min = 14, .max = 42 },
- .p1 = { .min = 2, .max = 6 },
- .p2 = { .dot_limit = 0,
- .p2_slow = 7, .p2_fast = 7
- },
-};
-
-static const intel_limit_t intel_limits_pineview_sdvo = {
- .dot = { .min = 20000, .max = 400000},
- .vco = { .min = 1700000, .max = 3500000 },
- /* Pineview's Ncounter is a ring counter */
- .n = { .min = 3, .max = 6 },
- .m = { .min = 2, .max = 256 },
- /* Pineview only has one combined m divider, which we treat as m2. */
- .m1 = { .min = 0, .max = 0 },
- .m2 = { .min = 0, .max = 254 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8 },
- .p2 = { .dot_limit = 200000,
- .p2_slow = 10, .p2_fast = 5 },
-};
-
-static const intel_limit_t intel_limits_pineview_lvds = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1700000, .max = 3500000 },
- .n = { .min = 3, .max = 6 },
- .m = { .min = 2, .max = 256 },
- .m1 = { .min = 0, .max = 0 },
- .m2 = { .min = 0, .max = 254 },
- .p = { .min = 7, .max = 112 },
- .p1 = { .min = 1, .max = 8 },
- .p2 = { .dot_limit = 112000,
- .p2_slow = 14, .p2_fast = 14 },
-};
-
-/* Ironlake / Sandybridge
- *
- * We calculate clock using (register_value + 2) for N/M1/M2, so here
- * the range value for them is (actual_value - 2).
- */
-static const intel_limit_t intel_limits_ironlake_dac = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 5 },
- .m = { .min = 79, .max = 127 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8 },
- .p2 = { .dot_limit = 225000,
- .p2_slow = 10, .p2_fast = 5 },
-};
-
-static const intel_limit_t intel_limits_ironlake_single_lvds = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 118 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 28, .max = 112 },
- .p1 = { .min = 2, .max = 8 },
- .p2 = { .dot_limit = 225000,
- .p2_slow = 14, .p2_fast = 14 },
-};
-
-static const intel_limit_t intel_limits_ironlake_dual_lvds = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 127 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 14, .max = 56 },
- .p1 = { .min = 2, .max = 8 },
- .p2 = { .dot_limit = 225000,
- .p2_slow = 7, .p2_fast = 7 },
-};
-
-/* LVDS 100mhz refclk limits. */
-static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 2 },
- .m = { .min = 79, .max = 126 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 28, .max = 112 },
- .p1 = { .min = 2, .max = 8 },
- .p2 = { .dot_limit = 225000,
- .p2_slow = 14, .p2_fast = 14 },
-};
-
-static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 126 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 14, .max = 42 },
- .p1 = { .min = 2, .max = 6 },
- .p2 = { .dot_limit = 225000,
- .p2_slow = 7, .p2_fast = 7 },
-};
-
-static const intel_limit_t intel_limits_vlv = {
- /*
- * These are the data rate limits (measured in fast clocks)
- * since those are the strictest limits we have. The fast
- * clock and actual rate limits are more relaxed, so checking
- * them would make no difference.
- */
- .dot = { .min = 25000 * 5, .max = 270000 * 5 },
- .vco = { .min = 4000000, .max = 6000000 },
- .n = { .min = 1, .max = 7 },
- .m1 = { .min = 2, .max = 3 },
- .m2 = { .min = 11, .max = 156 },
- .p1 = { .min = 2, .max = 3 },
- .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
-};
-
-static void vlv_clock(int refclk, intel_clock_t *clock)
-{
- clock->m = clock->m1 * clock->m2;
- clock->p = clock->p1 * clock->p2;
- if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
- clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
- clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-}
-
/**
* Returns whether any output on the specified pipe is of the specified type
*/
@@ -342,384 +73,6 @@ bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
return false;
}
-static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
- int refclk)
-{
- struct drm_device *dev = crtc->dev;
- const intel_limit_t *limit;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if (intel_is_dual_link_lvds(dev)) {
- if (refclk == 100000)
- limit = &intel_limits_ironlake_dual_lvds_100m;
- else
- limit = &intel_limits_ironlake_dual_lvds;
- } else {
- if (refclk == 100000)
- limit = &intel_limits_ironlake_single_lvds_100m;
- else
- limit = &intel_limits_ironlake_single_lvds;
- }
- } else
- limit = &intel_limits_ironlake_dac;
-
- return limit;
-}
-
-static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- const intel_limit_t *limit;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if (intel_is_dual_link_lvds(dev))
- limit = &intel_limits_g4x_dual_channel_lvds;
- else
- limit = &intel_limits_g4x_single_channel_lvds;
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
- limit = &intel_limits_g4x_hdmi;
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
- limit = &intel_limits_g4x_sdvo;
- } else /* The option is for other outputs */
- limit = &intel_limits_i9xx_sdvo;
-
- return limit;
-}
-
-static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
-{
- struct drm_device *dev = crtc->dev;
- const intel_limit_t *limit;
-
- if (HAS_PCH_SPLIT(dev))
- limit = intel_ironlake_limit(crtc, refclk);
- else if (IS_G4X(dev)) {
- limit = intel_g4x_limit(crtc);
- } else if (IS_PINEVIEW(dev)) {
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits_pineview_lvds;
- else
- limit = &intel_limits_pineview_sdvo;
- } else if (IS_VALLEYVIEW(dev)) {
- limit = &intel_limits_vlv;
- } else if (!IS_GEN2(dev)) {
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits_i9xx_lvds;
- else
- limit = &intel_limits_i9xx_sdvo;
- } else {
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits_i8xx_lvds;
- else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
- limit = &intel_limits_i8xx_dvo;
- else
- limit = &intel_limits_i8xx_dac;
- }
- return limit;
-}
-
-/* m1 is reserved as 0 in Pineview, n is a ring counter */
-static void pineview_clock(int refclk, intel_clock_t *clock)
-{
- clock->m = clock->m2 + 2;
- clock->p = clock->p1 * clock->p2;
- if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
- clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
- clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-}
-
-static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
-{
- return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
-}
-
-static void i9xx_clock(int refclk, intel_clock_t *clock)
-{
- clock->m = i9xx_dpll_compute_m(clock);
- clock->p = clock->p1 * clock->p2;
- if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
- return;
- clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
- clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-}
-
-#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
-/**
- * Returns whether the given set of divisors are valid for a given refclk with
- * the given connectors.
- */
-
-static bool intel_PLL_is_valid(struct drm_device *dev,
- const intel_limit_t *limit,
- const intel_clock_t *clock)
-{
- if (clock->n < limit->n.min || limit->n.max < clock->n)
- INTELPllInvalid("n out of range\n");
- if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
- INTELPllInvalid("p1 out of range\n");
- if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
- INTELPllInvalid("m2 out of range\n");
- if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
- INTELPllInvalid("m1 out of range\n");
-
- if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
- if (clock->m1 <= clock->m2)
- INTELPllInvalid("m1 <= m2\n");
-
- if (!IS_VALLEYVIEW(dev)) {
- if (clock->p < limit->p.min || limit->p.max < clock->p)
- INTELPllInvalid("p out of range\n");
- if (clock->m < limit->m.min || limit->m.max < clock->m)
- INTELPllInvalid("m out of range\n");
- }
-
- if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
- INTELPllInvalid("vco out of range\n");
- /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
- * connector, etc., rather than just a single range.
- */
- if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
- INTELPllInvalid("dot out of range\n");
-
- return true;
-}
-
-static bool
-i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int err = target;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- /*
- * For LVDS just rely on its current settings for dual-channel.
- * We haven't figured out how to reliably set up different
- * single/dual channel state, if we even can.
- */
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
- clock.m1++) {
- for (clock.m2 = limit->m2.min;
- clock.m2 <= limit->m2.max; clock.m2++) {
- if (clock.m2 >= clock.m1)
- break;
- for (clock.n = limit->n.min;
- clock.n <= limit->n.max; clock.n++) {
- for (clock.p1 = limit->p1.min;
- clock.p1 <= limit->p1.max; clock.p1++) {
- int this_err;
-
- i9xx_clock(refclk, &clock);
- if (!intel_PLL_is_valid(dev, limit,
- &clock))
- continue;
- if (match_clock &&
- clock.p != match_clock->p)
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- }
- }
-
- return (err != target);
-}
-
-static bool
-pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int err = target;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- /*
- * For LVDS just rely on its current settings for dual-channel.
- * We haven't figured out how to reliably set up different
- * single/dual channel state, if we even can.
- */
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
- clock.m1++) {
- for (clock.m2 = limit->m2.min;
- clock.m2 <= limit->m2.max; clock.m2++) {
- for (clock.n = limit->n.min;
- clock.n <= limit->n.max; clock.n++) {
- for (clock.p1 = limit->p1.min;
- clock.p1 <= limit->p1.max; clock.p1++) {
- int this_err;
-
- pineview_clock(refclk, &clock);
- if (!intel_PLL_is_valid(dev, limit,
- &clock))
- continue;
- if (match_clock &&
- clock.p != match_clock->p)
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- }
- }
-
- return (err != target);
-}
-
-static bool
-g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int max_n;
- bool found;
- /* approximately equals target * 0.00585 */
- int err_most = (target >> 8) + (target >> 9);
- found = false;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- max_n = limit->n.max;
- /* based on hardware requirement, prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
- /* based on hardware requirement, prefere larger m1,m2 */
- for (clock.m1 = limit->m1.max;
- clock.m1 >= limit->m1.min; clock.m1--) {
- for (clock.m2 = limit->m2.max;
- clock.m2 >= limit->m2.min; clock.m2--) {
- for (clock.p1 = limit->p1.max;
- clock.p1 >= limit->p1.min; clock.p1--) {
- int this_err;
-
- i9xx_clock(refclk, &clock);
- if (!intel_PLL_is_valid(dev, limit,
- &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err_most) {
- *best_clock = clock;
- err_most = this_err;
- max_n = clock.n;
- found = true;
- }
- }
- }
- }
- }
- return found;
-}
-
-static bool
-vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- unsigned int bestppm = 1000000;
- /* min update 19.2 MHz */
- int max_n = min(limit->n.max, refclk / 19200);
- bool found = false;
-
- target *= 5; /* fast clock */
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- /* based on hardware requirement, prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
- for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
- for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
- clock.p2 -= clock.p2 > 10 ? 2 : 1) {
- clock.p = clock.p1 * clock.p2;
- /* based on hardware requirement, prefer bigger m1,m2 values */
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
- unsigned int ppm, diff;
-
- clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
- refclk * clock.m1);
-
- vlv_clock(refclk, &clock);
-
- if (!intel_PLL_is_valid(dev, limit,
- &clock))
- continue;
-
- diff = abs(clock.dot - target);
- ppm = div_u64(1000000ULL * diff, target);
-
- if (ppm < 100 && clock.p > best_clock->p) {
- bestppm = 0;
- *best_clock = clock;
- found = true;
- }
-
- if (bestppm >= 10 && ppm < bestppm - 10) {
- bestppm = ppm;
- *best_clock = clock;
- found = true;
- }
- }
- }
- }
- }
-
- return found;
-}
-
bool intel_crtc_active(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -899,103 +252,6 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
return I915_READ(SDEISR) & bit;
}
-/* Only for pre-ILK configs */
-void assert_pll(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state)
-{
- int reg;
- u32 val;
- bool cur_state;
-
- reg = DPLL(pipe);
- val = I915_READ(reg);
- cur_state = !!(val & DPLL_VCO_ENABLE);
- WARN(cur_state != state,
- "PLL state assertion failure (expected %s, current %s)\n",
- state_string(state), state_string(cur_state));
-}
-
-/* XXX: the dsi pll is shared between MIPI DSI ports */
-static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
-{
- u32 val;
- bool cur_state;
-
- mutex_lock(&dev_priv->dpio_lock);
- val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
- mutex_unlock(&dev_priv->dpio_lock);
-
- cur_state = val & DSI_PLL_VCO_EN;
- WARN(cur_state != state,
- "DSI PLL state assertion failure (expected %s, current %s)\n",
- state_string(state), state_string(cur_state));
-}
-#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
-#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
-
-struct intel_shared_dpll *
-intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
-
- if (crtc->config.shared_dpll < 0)
- return NULL;
-
- return &dev_priv->shared_dplls[crtc->config.shared_dpll];
-}
-
-/* For ILK+ */
-void assert_shared_dpll(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll,
- bool state)
-{
- bool cur_state;
- struct intel_dpll_hw_state hw_state;
-
- if (HAS_PCH_LPT(dev_priv->dev)) {
- DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
- return;
- }
-
- if (WARN (!pll,
- "asserting DPLL %s with no DPLL\n", state_string(state)))
- return;
-
- cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
- WARN(cur_state != state,
- "%s assertion failure (expected %s, current %s)\n",
- pll->name, state_string(state), state_string(cur_state));
-}
-
-static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- int pp_reg, lvds_reg;
- u32 val;
- enum pipe panel_pipe = PIPE_A;
- bool locked = true;
-
- if (HAS_PCH_SPLIT(dev_priv->dev)) {
- pp_reg = PCH_PP_CONTROL;
- lvds_reg = PCH_LVDS;
- } else {
- pp_reg = PP_CONTROL;
- lvds_reg = LVDS;
- }
-
- val = I915_READ(pp_reg);
- if (!(val & PANEL_POWER_ON) ||
- ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
- locked = false;
-
- if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
- panel_pipe = PIPE_B;
-
- WARN(panel_pipe == pipe && locked,
- "panel assertion failure, pipe %c regs locked\n",
- pipe_name(pipe));
-}
-
void assert_pipe(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
@@ -1101,21 +357,8 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
}
}
-static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
-{
- u32 val;
- bool enabled;
-
- WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
-
- val = I915_READ(PCH_DREF_CONTROL);
- enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
- DREF_SUPERSPREAD_SOURCE_MASK));
- WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
-}
-
-static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe)
+void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
{
int reg;
u32 val;
@@ -1285,129 +528,6 @@ static void intel_reset_dpio(struct drm_device *dev)
I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
}
-static void vlv_enable_pll(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int reg = DPLL(crtc->pipe);
- u32 dpll = crtc->config.dpll_hw_state.dpll;
-
- assert_pipe_disabled(dev_priv, crtc->pipe);
-
- /* No really, not for ILK+ */
- BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
-
- /* PLL is protected by panel, make sure we can write it */
- if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
- assert_panel_unlocked(dev_priv, crtc->pipe);
-
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150);
-
- if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
- DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
-
- I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
- POSTING_READ(DPLL_MD(crtc->pipe));
-
- /* We do this three times for luck */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
-}
-
-static void i9xx_enable_pll(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int reg = DPLL(crtc->pipe);
- u32 dpll = crtc->config.dpll_hw_state.dpll;
-
- assert_pipe_disabled(dev_priv, crtc->pipe);
-
- /* No really, not for ILK+ */
- BUG_ON(INTEL_INFO(dev)->gen >= 5);
-
- /* PLL is protected by panel, make sure we can write it */
- if (IS_MOBILE(dev) && !IS_I830(dev))
- assert_panel_unlocked(dev_priv, crtc->pipe);
-
- I915_WRITE(reg, dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(reg);
- udelay(150);
-
- if (INTEL_INFO(dev)->gen >= 4) {
- I915_WRITE(DPLL_MD(crtc->pipe),
- crtc->config.dpll_hw_state.dpll_md);
- } else {
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(reg, dpll);
- }
-
- /* We do this three times for luck */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
- I915_WRITE(reg, dpll);
- POSTING_READ(reg);
- udelay(150); /* wait for warmup */
-}
-
-/**
- * i9xx_disable_pll - disable a PLL
- * @dev_priv: i915 private structure
- * @pipe: pipe PLL to disable
- *
- * Disable the PLL for @pipe, making sure the pipe is off first.
- *
- * Note! This is for pre-ILK only.
- */
-static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
- /* Don't disable pipe A or pipe A PLLs if needed */
- if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
- return;
-
- /* Make sure the pipe isn't still relying on us */
- assert_pipe_disabled(dev_priv, pipe);
-
- I915_WRITE(DPLL(pipe), 0);
- POSTING_READ(DPLL(pipe));
-}
-
-static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
- u32 val = 0;
-
- /* Make sure the pipe isn't still relying on us */
- assert_pipe_disabled(dev_priv, pipe);
-
- /*
- * Leave integrated clock source and reference clock enabled for pipe B.
- * The latter is needed for VGA hotplug / manual detection.
- */
- if (pipe == PIPE_B)
- val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
- I915_WRITE(DPLL(pipe), val);
- POSTING_READ(DPLL(pipe));
-}
-
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
struct intel_digital_port *dport)
{
@@ -1429,77 +549,6 @@ void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
port_name(dport->port), I915_READ(DPLL(0)));
}
-/**
- * ironlake_enable_shared_dpll - enable PCH PLL
- * @dev_priv: i915 private structure
- * @pipe: pipe PLL to enable
- *
- * The PCH PLL needs to be enabled before the PCH transcoder, since it
- * drives the transcoder clock.
- */
-static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- /* PCH PLLs only available on ILK, SNB and IVB */
- BUG_ON(INTEL_INFO(dev)->gen < 5);
- if (WARN_ON(pll == NULL))
- return;
-
- if (WARN_ON(pll->refcount == 0))
- return;
-
- DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
- pll->name, pll->active, pll->on,
- crtc->base.base.id);
-
- if (pll->active++) {
- WARN_ON(!pll->on);
- assert_shared_dpll_enabled(dev_priv, pll);
- return;
- }
- WARN_ON(pll->on);
-
- DRM_DEBUG_KMS("enabling %s\n", pll->name);
- pll->enable(dev_priv, pll);
- pll->on = true;
-}
-
-static void intel_disable_shared_dpll(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- /* PCH only available on ILK+ */
- BUG_ON(INTEL_INFO(dev)->gen < 5);
- if (WARN_ON(pll == NULL))
- return;
-
- if (WARN_ON(pll->refcount == 0))
- return;
-
- DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
- pll->name, pll->active, pll->on,
- crtc->base.base.id);
-
- if (WARN_ON(pll->active == 0)) {
- assert_shared_dpll_disabled(dev_priv, pll);
- return;
- }
-
- assert_shared_dpll_enabled(dev_priv, pll);
- WARN_ON(!pll->on);
- if (--pll->active)
- return;
-
- DRM_DEBUG_KMS("disabling %s\n", pll->name);
- pll->disable(dev_priv, pll);
- pll->on = false;
-}
-
static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
@@ -2693,98 +1742,6 @@ static void lpt_pch_enable(struct drm_crtc *crtc)
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
-static void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- if (pll == NULL)
- return;
-
- if (pll->refcount == 0) {
- WARN(1, "bad %s refcount\n", pll->name);
- return;
- }
-
- if (--pll->refcount == 0) {
- WARN_ON(pll->on);
- WARN_ON(pll->active);
- }
-
- crtc->config.shared_dpll = DPLL_ID_PRIVATE;
-}
-
-static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
- enum intel_dpll_id i;
-
- if (pll) {
- DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
- crtc->base.base.id, pll->name);
- intel_put_shared_dpll(crtc);
- }
-
- if (HAS_PCH_IBX(dev_priv->dev)) {
- /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
- i = (enum intel_dpll_id) crtc->pipe;
- pll = &dev_priv->shared_dplls[i];
-
- DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
- crtc->base.base.id, pll->name);
-
- goto found;
- }
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- /* Only want to check enabled timings first */
- if (pll->refcount == 0)
- continue;
-
- if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state,
- sizeof(pll->hw_state)) == 0) {
- DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
- crtc->base.base.id,
- pll->name, pll->refcount, pll->active);
-
- goto found;
- }
- }
-
- /* Ok no matching timings, maybe there's a free one? */
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
- if (pll->refcount == 0) {
- DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
- crtc->base.base.id, pll->name);
- goto found;
- }
- }
-
- return NULL;
-
-found:
- crtc->config.shared_dpll = i;
- DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
- pipe_name(crtc->pipe));
-
- if (pll->active == 0) {
- memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
- sizeof(pll->hw_state));
-
- DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
- WARN_ON(pll->on);
- assert_shared_dpll_disabled(dev_priv, pll);
-
- pll->mode_set(dev_priv, pll);
- }
- pll->refcount++;
-
- return pll;
-}
-
static void cpt_verify_modeset(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4166,388 +3123,65 @@ static void compute_m_n(unsigned int m, unsigned int n,
uint32_t *ret_m, uint32_t *ret_n)
{
*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
- *ret_m = div_u64((uint64_t) m * *ret_n, n);
- intel_reduce_m_n_ratio(ret_m, ret_n);
-}
-
-void
-intel_link_compute_m_n(int bits_per_pixel, int nlanes,
- int pixel_clock, int link_clock,
- struct intel_link_m_n *m_n)
-{
- m_n->tu = 64;
-
- compute_m_n(bits_per_pixel * pixel_clock,
- link_clock * nlanes * 8,
- &m_n->gmch_m, &m_n->gmch_n);
-
- compute_m_n(pixel_clock, link_clock,
- &m_n->link_m, &m_n->link_n);
-}
-
-static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
-{
- if (i915.panel_use_ssc >= 0)
- return i915.panel_use_ssc != 0;
- return dev_priv->vbt.lvds_use_ssc
- && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
-}
-
-static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int refclk;
-
- if (IS_VALLEYVIEW(dev)) {
- refclk = 100000;
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
- refclk = dev_priv->vbt.lvds_ssc_freq;
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
- } else if (!IS_GEN2(dev)) {
- refclk = 96000;
- } else {
- refclk = 48000;
- }
-
- return refclk;
-}
-
-static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
-{
- return (1 << dpll->n) << 16 | dpll->m2;
-}
-
-static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
-{
- return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
-}
-
-static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
- intel_clock_t *reduced_clock)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
- u32 fp, fp2 = 0;
-
- if (IS_PINEVIEW(dev)) {
- fp = pnv_dpll_compute_fp(&crtc->config.dpll);
- if (reduced_clock)
- fp2 = pnv_dpll_compute_fp(reduced_clock);
- } else {
- fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
- if (reduced_clock)
- fp2 = i9xx_dpll_compute_fp(reduced_clock);
- }
-
- I915_WRITE(FP0(pipe), fp);
- crtc->config.dpll_hw_state.fp0 = fp;
-
- crtc->lowfreq_avail = false;
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
- reduced_clock && i915.powersave) {
- I915_WRITE(FP1(pipe), fp2);
- crtc->config.dpll_hw_state.fp1 = fp2;
- crtc->lowfreq_avail = true;
- } else {
- I915_WRITE(FP1(pipe), fp);
- crtc->config.dpll_hw_state.fp1 = fp;
- }
-}
-
-static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
- pipe)
-{
- u32 reg_val;
-
- /*
- * PLLB opamp always calibrates to max value of 0x3f, force enable it
- * and set it to a reasonable value instead.
- */
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
- reg_val &= 0xffffff00;
- reg_val |= 0x00000030;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
- reg_val &= 0x8cffffff;
- reg_val = 0x8c000000;
- vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
- reg_val &= 0xffffff00;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
- reg_val &= 0x00ffffff;
- reg_val |= 0xb0000000;
- vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-}
-
-static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
- struct intel_link_m_n *m_n)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
-
- I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
- I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
- I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
- I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
-}
-
-static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
- struct intel_link_m_n *m_n)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
- enum transcoder transcoder = crtc->config.cpu_transcoder;
-
- if (INTEL_INFO(dev)->gen >= 5) {
- I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
- I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
- I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
- I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
- } else {
- I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
- I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
- I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
- I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
- }
-}
-
-static void intel_dp_set_m_n(struct intel_crtc *crtc)
-{
- if (crtc->config.has_pch_encoder)
- intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
- else
- intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
-}
-
-static void vlv_update_pll(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
- u32 dpll, mdiv;
- u32 bestn, bestm1, bestm2, bestp1, bestp2;
- u32 coreclk, reg_val, dpll_md;
-
- mutex_lock(&dev_priv->dpio_lock);
-
- bestn = crtc->config.dpll.n;
- bestm1 = crtc->config.dpll.m1;
- bestm2 = crtc->config.dpll.m2;
- bestp1 = crtc->config.dpll.p1;
- bestp2 = crtc->config.dpll.p2;
-
- /* See eDP HDMI DPIO driver vbios notes doc */
-
- /* PLL B needs special handling */
- if (pipe)
- vlv_pllb_recal_opamp(dev_priv, pipe);
-
- /* Set up Tx target for periodic Rcomp update */
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
-
- /* Disable target IRef on PLL */
- reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
- reg_val &= 0x00ffffff;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
-
- /* Disable fast lock */
- vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
-
- /* Set idtafcrecal before PLL is enabled */
- mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
- mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
- mdiv |= ((bestn << DPIO_N_SHIFT));
- mdiv |= (1 << DPIO_K_SHIFT);
-
- /*
- * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
- * but we don't support that).
- * Note: don't use the DAC post divider as it seems unstable.
- */
- mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
- mdiv |= DPIO_ENABLE_CALIBRATION;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
- /* Set HBR and RBR LPF coefficients */
- if (crtc->config.port_clock == 162000 ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
- 0x009f0003);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
- 0x00d0000f);
-
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
- /* Use SSC source */
- if (!pipe)
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df40000);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df70000);
- } else { /* HDMI or VGA */
- /* Use bend source */
- if (!pipe)
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df70000);
- else
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
- 0x0df40000);
- }
-
- coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
- coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
- coreclk |= 0x01000000;
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
-
- vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
-
- /*
- * Enable DPIO clock input. We should never disable the reference
- * clock for pipe B, since VGA hotplug / manual detection depends
- * on it.
- */
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
- /* We should never disable this, set it here for state tracking */
- if (pipe == PIPE_B)
- dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
- dpll |= DPLL_VCO_ENABLE;
- crtc->config.dpll_hw_state.dpll = dpll;
-
- dpll_md = (crtc->config.pixel_multiplier - 1)
- << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- crtc->config.dpll_hw_state.dpll_md = dpll_md;
-
- mutex_unlock(&dev_priv->dpio_lock);
-}
-
-static void i9xx_update_pll(struct intel_crtc *crtc,
- intel_clock_t *reduced_clock,
- int num_connectors)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpll;
- bool is_sdvo;
- struct dpll *clock = &crtc->config.dpll;
-
- i9xx_update_pll_dividers(crtc, reduced_clock);
-
- is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
-
- dpll = DPLL_VGA_MODE_DIS;
-
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
- dpll |= (crtc->config.pixel_multiplier - 1)
- << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
-
- if (is_sdvo)
- dpll |= DPLL_SDVO_HIGH_SPEED;
-
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
- dpll |= DPLL_SDVO_HIGH_SPEED;
-
- /* compute bitmask from p1 value */
- if (IS_PINEVIEW(dev))
- dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
- else {
- dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (IS_G4X(dev) && reduced_clock)
- dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
- }
- switch (clock->p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
- if (INTEL_INFO(dev)->gen >= 4)
- dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+ *ret_m = div_u64((uint64_t) m * *ret_n, n);
+ intel_reduce_m_n_ratio(ret_m, ret_n);
+}
- if (crtc->config.sdvo_tv_clock)
- dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
- intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
- else
- dpll |= PLL_REF_INPUT_DREFCLK;
+void
+intel_link_compute_m_n(int bits_per_pixel, int nlanes,
+ int pixel_clock, int link_clock,
+ struct intel_link_m_n *m_n)
+{
+ m_n->tu = 64;
- dpll |= DPLL_VCO_ENABLE;
- crtc->config.dpll_hw_state.dpll = dpll;
+ compute_m_n(bits_per_pixel * pixel_clock,
+ link_clock * nlanes * 8,
+ &m_n->gmch_m, &m_n->gmch_n);
- if (INTEL_INFO(dev)->gen >= 4) {
- u32 dpll_md = (crtc->config.pixel_multiplier - 1)
- << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- crtc->config.dpll_hw_state.dpll_md = dpll_md;
- }
+ compute_m_n(pixel_clock, link_clock,
+ &m_n->link_m, &m_n->link_n);
}
-static void i8xx_update_pll(struct intel_crtc *crtc,
- intel_clock_t *reduced_clock,
- int num_connectors)
+static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
+ struct intel_link_m_n *m_n)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpll;
- struct dpll *clock = &crtc->config.dpll;
+ int pipe = crtc->pipe;
- i9xx_update_pll_dividers(crtc, reduced_clock);
+ I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
+ I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
+ I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
+}
- dpll = DPLL_VGA_MODE_DIS;
+static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+ struct intel_link_m_n *m_n)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ enum transcoder transcoder = crtc->config.cpu_transcoder;
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
- dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (INTEL_INFO(dev)->gen >= 5) {
+ I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
+ I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
+ I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
} else {
- if (clock->p1 == 2)
- dpll |= PLL_P1_DIVIDE_BY_TWO;
- else
- dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (clock->p2 == 4)
- dpll |= PLL_P2_DIVIDE_BY_4;
+ I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
+ I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
+ I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
}
+}
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
- dpll |= DPLL_DVO_2X_MODE;
-
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
- intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+static void intel_dp_set_m_n(struct intel_crtc *crtc)
+{
+ if (crtc->config.has_pch_encoder)
+ intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
else
- dpll |= PLL_REF_INPUT_DREFCLK;
-
- dpll |= DPLL_VCO_ENABLE;
- crtc->config.dpll_hw_state.dpll = dpll;
+ intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
}
static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
@@ -4892,32 +3526,6 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
I915_READ(LVDS) & LVDS_BORDER_ENABLE;
}
-static void vlv_crtc_clock_get(struct intel_crtc *crtc,
- struct intel_crtc_config *pipe_config)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = pipe_config->cpu_transcoder;
- intel_clock_t clock;
- u32 mdiv;
- int refclk = 100000;
-
- mutex_lock(&dev_priv->dpio_lock);
- mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
- mutex_unlock(&dev_priv->dpio_lock);
-
- clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
- clock.m2 = mdiv & DPIO_M2DIV_MASK;
- clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
- clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
- clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
-
- vlv_clock(refclk, &clock);
-
- /* clock.dot is the fast clock */
- pipe_config->port_clock = clock.dot / 5;
-}
-
static void i9xx_get_plane_config(struct intel_crtc *crtc,
struct intel_plane_config *plane_config)
{
@@ -5407,32 +4015,6 @@ void intel_init_pch_refclk(struct drm_device *dev)
lpt_init_pch_refclk(dev);
}
-static int ironlake_get_refclk(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
- int num_connectors = 0;
- bool is_lvds = false;
-
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- switch (encoder->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- }
- num_connectors++;
- }
-
- if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
- dev_priv->vbt.lvds_ssc_freq);
- return dev_priv->vbt.lvds_ssc_freq;
- }
-
- return 120000;
-}
-
static void ironlake_set_pipeconf(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
@@ -5654,96 +4236,6 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
return DIV_ROUND_UP(bps, link_bw * 8);
}
-static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
-{
- return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
-}
-
-static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
- u32 *fp,
- intel_clock_t *reduced_clock, u32 *fp2)
-{
- struct drm_crtc *crtc = &intel_crtc->base;
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *intel_encoder;
- uint32_t dpll;
- int factor, num_connectors = 0;
- bool is_lvds = false, is_sdvo = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
- switch (intel_encoder->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- case INTEL_OUTPUT_SDVO:
- case INTEL_OUTPUT_HDMI:
- is_sdvo = true;
- break;
- }
-
- num_connectors++;
- }
-
- /* Enable autotuning of the PLL clock (if permissible) */
- factor = 21;
- if (is_lvds) {
- if ((intel_panel_use_ssc(dev_priv) &&
- dev_priv->vbt.lvds_ssc_freq == 100000) ||
- (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
- factor = 25;
- } else if (intel_crtc->config.sdvo_tv_clock)
- factor = 20;
-
- if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
- *fp |= FP_CB_TUNE;
-
- if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
- *fp2 |= FP_CB_TUNE;
-
- dpll = 0;
-
- if (is_lvds)
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
-
- dpll |= (intel_crtc->config.pixel_multiplier - 1)
- << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
-
- if (is_sdvo)
- dpll |= DPLL_SDVO_HIGH_SPEED;
- if (intel_crtc->config.has_dp_encoder)
- dpll |= DPLL_SDVO_HIGH_SPEED;
-
- /* compute bitmask from p1 value */
- dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- /* also FPA1 */
- dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
-
- switch (intel_crtc->config.dpll.p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
-
- if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
- else
- dpll |= PLL_REF_INPUT_DREFCLK;
-
- return dpll | DPLL_VCO_ENABLE;
-}
-
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
int x, int y,
struct drm_framebuffer *fb)
@@ -6732,111 +5224,6 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
mutex_unlock(&crtc->mutex);
}
-static int i9xx_pll_refclk(struct drm_device *dev,
- const struct intel_crtc_config *pipe_config)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpll = pipe_config->dpll_hw_state.dpll;
-
- if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
- return dev_priv->vbt.lvds_ssc_freq;
- else if (HAS_PCH_SPLIT(dev))
- return 120000;
- else if (!IS_GEN2(dev))
- return 96000;
- else
- return 48000;
-}
-
-/* Returns the clock of the currently programmed mode of the given pipe. */
-static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
- struct intel_crtc_config *pipe_config)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = pipe_config->cpu_transcoder;
- u32 dpll = pipe_config->dpll_hw_state.dpll;
- u32 fp;
- intel_clock_t clock;
- int refclk = i9xx_pll_refclk(dev, pipe_config);
-
- if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = pipe_config->dpll_hw_state.fp0;
- else
- fp = pipe_config->dpll_hw_state.fp1;
-
- clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
- if (IS_PINEVIEW(dev)) {
- clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
- clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
- } else {
- clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
- clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
- }
-
- if (!IS_GEN2(dev)) {
- if (IS_PINEVIEW(dev))
- clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
- else
- clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT);
-
- switch (dpll & DPLL_MODE_MASK) {
- case DPLLB_MODE_DAC_SERIAL:
- clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
- 5 : 10;
- break;
- case DPLLB_MODE_LVDS:
- clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
- 7 : 14;
- break;
- default:
- DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
- "mode\n", (int)(dpll & DPLL_MODE_MASK));
- return;
- }
-
- if (IS_PINEVIEW(dev))
- pineview_clock(refclk, &clock);
- else
- i9xx_clock(refclk, &clock);
- } else {
- u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
- bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
-
- if (is_lvds) {
- clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT);
-
- if (lvds & LVDS_CLKB_POWER_UP)
- clock.p2 = 7;
- else
- clock.p2 = 14;
- } else {
- if (dpll & PLL_P1_DIVIDE_BY_TWO)
- clock.p1 = 2;
- else {
- clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
- }
- if (dpll & PLL_P2_DIVIDE_BY_4)
- clock.p2 = 4;
- else
- clock.p2 = 2;
- }
-
- i9xx_clock(refclk, &clock);
- }
-
- /*
- * This value includes pixel_multiplier. We will use
- * port_clock to compute adjusted_mode.crtc_clock in the
- * encoder's get_config() function.
- */
- pipe_config->port_clock = clock.dot;
-}
-
int intel_dotclock_calculate(int link_freq,
const struct intel_link_m_n *m_n)
{
@@ -6856,25 +5243,6 @@ int intel_dotclock_calculate(int link_freq,
return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
}
-static void ironlake_pch_clock_get(struct intel_crtc *crtc,
- struct intel_crtc_config *pipe_config)
-{
- struct drm_device *dev = crtc->base.dev;
-
- /* read out port_clock from the DPLL */
- i9xx_crtc_clock_get(crtc, pipe_config);
-
- /*
- * This value does not include pixel_multiplier.
- * We will check that port_clock and adjusted_mode.crtc_clock
- * agree once we know their relationship in the encoder's
- * get_config() function.
- */
- pipe_config->adjusted_mode.crtc_clock =
- intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
- &pipe_config->fdi_m_n);
-}
-
/** Returns the currently programmed mode of the given pipe. */
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc)
@@ -6923,73 +5291,6 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
return mode;
}
-static void intel_increase_pllclock(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int dpll_reg = DPLL(pipe);
- int dpll;
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!dev_priv->lvds_downclock_avail)
- return;
-
- dpll = I915_READ(dpll_reg);
- if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
- DRM_DEBUG_DRIVER("upclocking LVDS\n");
-
- assert_panel_unlocked(dev_priv, pipe);
-
- dpll &= ~DISPLAY_RATE_SELECT_FPA1;
- I915_WRITE(dpll_reg, dpll);
- intel_wait_for_vblank(dev, pipe);
-
- dpll = I915_READ(dpll_reg);
- if (dpll & DISPLAY_RATE_SELECT_FPA1)
- DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
- }
-}
-
-static void intel_decrease_pllclock(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!dev_priv->lvds_downclock_avail)
- return;
-
- /*
- * Since this is called by a timer, we should never get here in
- * the manual case.
- */
- if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
- int pipe = intel_crtc->pipe;
- int dpll_reg = DPLL(pipe);
- int dpll;
-
- DRM_DEBUG_DRIVER("downclocking LVDS\n");
-
- assert_panel_unlocked(dev_priv, pipe);
-
- dpll = I915_READ(dpll_reg);
- dpll |= DISPLAY_RATE_SELECT_FPA1;
- I915_WRITE(dpll_reg, dpll);
- intel_wait_for_vblank(dev, pipe);
- dpll = I915_READ(dpll_reg);
- if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
- DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
- }
-
-}
-
void intel_mark_busy(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -9031,107 +7332,6 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
.page_flip = intel_crtc_page_flip,
};
-static void intel_cpu_pll_init(struct drm_device *dev)
-{
- if (HAS_DDI(dev))
- intel_ddi_pll_init(dev);
-}
-
-static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll,
- struct intel_dpll_hw_state *hw_state)
-{
- uint32_t val;
-
- val = I915_READ(PCH_DPLL(pll->id));
- hw_state->dpll = val;
- hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
- hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
-
- return val & DPLL_VCO_ENABLE;
-}
-
-static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll)
-{
- I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0);
- I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1);
-}
-
-static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll)
-{
- /* PCH refclock must be enabled first */
- ibx_assert_pch_refclk_enabled(dev_priv);
-
- I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(PCH_DPLL(pll->id));
- udelay(150);
-
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
- POSTING_READ(PCH_DPLL(pll->id));
- udelay(200);
-}
-
-static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll)
-{
- struct drm_device *dev = dev_priv->dev;
- struct intel_crtc *crtc;
-
- /* Make sure no transcoder isn't still depending on us. */
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
- if (intel_crtc_to_shared_dpll(crtc) == pll)
- assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
- }
-
- I915_WRITE(PCH_DPLL(pll->id), 0);
- POSTING_READ(PCH_DPLL(pll->id));
- udelay(200);
-}
-
-static char *ibx_pch_dpll_names[] = {
- "PCH DPLL A",
- "PCH DPLL B",
-};
-
-static void ibx_pch_dpll_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
-
- dev_priv->num_shared_dpll = 2;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- dev_priv->shared_dplls[i].id = i;
- dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
- dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
- dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
- dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
- dev_priv->shared_dplls[i].get_hw_state =
- ibx_pch_dpll_get_hw_state;
- }
-}
-
-static void intel_shared_dpll_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
- ibx_pch_dpll_init(dev);
- else
- dev_priv->num_shared_dpll = 0;
-
- BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
-}
-
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -9561,15 +7761,6 @@ static void intel_init_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
- dev_priv->display.find_dpll = g4x_find_best_dpll;
- else if (IS_VALLEYVIEW(dev))
- dev_priv->display.find_dpll = vlv_find_best_dpll;
- else if (IS_PINEVIEW(dev))
- dev_priv->display.find_dpll = pnv_find_best_dpll;
- else
- dev_priv->display.find_dpll = i9xx_find_best_dpll;
-
if (HAS_DDI(dev)) {
dev_priv->display.get_pipe_config = haswell_get_pipe_config;
dev_priv->display.get_plane_config = ironlake_get_plane_config;
@@ -9652,6 +7843,7 @@ static void intel_init_display(struct drm_device *dev)
valleyview_modeset_global_resources;
}
+ intel_pll_init(dev_priv);
intel_fdi_init(dev_priv);
intel_eld_init(dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 013ddf5..aa93f1a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -728,16 +728,6 @@ __intel_framebuffer_create(struct drm_device *dev,
void intel_prepare_page_flip(struct drm_device *dev, int plane);
void intel_finish_page_flip(struct drm_device *dev, int pipe);
void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
-struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
-void assert_shared_dpll(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll,
- bool state);
-#define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true)
-#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
-void assert_pll(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state);
-#define assert_pll_enabled(d, p) assert_pll(d, p, true)
-#define assert_pll_disabled(d, p) assert_pll(d, p, false)
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
@@ -770,6 +760,9 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
int intel_format_to_fourcc(int format);
bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
bool need_vtd_wa(struct drm_device *dev);
+void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
+
/* intel_dp.c */
void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
@@ -926,6 +919,70 @@ extern struct drm_display_mode *intel_find_panel_downclock(
struct drm_device *dev,
struct drm_display_mode *fixed_mode,
struct drm_connector *connector);
+bool intel_panel_use_ssc(struct drm_i915_private *dev_priv);
+void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe);
+
+
+/* intel_pll.c */
+typedef struct {
+ int min, max;
+} intel_range_t;
+
+typedef struct {
+ int dot_limit;
+ int p2_slow, p2_fast;
+} intel_p2_t;
+
+typedef struct intel_limit intel_limit_t;
+struct intel_limit {
+ intel_range_t dot, vco, n, m, m1, m2, p, p1;
+ intel_p2_t p2;
+};
+
+const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk);
+void vlv_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+void ironlake_pch_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
+ u32 *fp, intel_clock_t *reduced_clock, u32 *fp2);
+int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors);
+int ironlake_get_refclk(struct drm_crtc *crtc);
+void intel_pll_init(struct drm_i915_private *dev_priv);
+void assert_pll(struct drm_i915_private *dev_priv,
+ enum pipe pipe, bool state);
+#define assert_pll_enabled(d, p) assert_pll(d, p, true)
+#define assert_pll_disabled(d, p) assert_pll(d, p, false)
+void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state);
+#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
+#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
+struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
+void assert_shared_dpll(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ bool state);
+#define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true)
+#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
+void ironlake_enable_shared_dpll(struct intel_crtc *crtc);
+void intel_disable_shared_dpll(struct intel_crtc *crtc);
+void intel_put_shared_dpll(struct intel_crtc *crtc);
+struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc);
+void intel_increase_pllclock(struct drm_crtc *crtc);
+void intel_decrease_pllclock(struct drm_crtc *crtc);
+void vlv_enable_pll(struct intel_crtc *crtc);
+void i9xx_enable_pll(struct intel_crtc *crtc);
+void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe);
+void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe);
+void vlv_update_pll(struct intel_crtc *crtc);
+void i9xx_update_pll(struct intel_crtc *crtc, intel_clock_t *reduced_clock,
+ int num_connectors);
+void i8xx_update_pll(struct intel_crtc *crtc, intel_clock_t *reduced_clock,
+ int num_connectors);
+uint32_t i9xx_dpll_compute_fp(struct dpll *dpll);
+void intel_cpu_pll_init(struct drm_device *dev);
+void intel_shared_dpll_init(struct drm_device *dev);
+
/* intel_pm.c */
void intel_init_clock_gating(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index cb05840..ec764e3 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1189,6 +1189,42 @@ void intel_panel_init_backlight_funcs(struct drm_device *dev)
}
}
+bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+{
+ if (i915.panel_use_ssc >= 0)
+ return i915.panel_use_ssc != 0;
+ return dev_priv->vbt.lvds_use_ssc
+ && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
+}
+
+void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ int pp_reg, lvds_reg;
+ u32 val;
+ enum pipe panel_pipe = PIPE_A;
+ bool locked = true;
+
+ if (HAS_PCH_SPLIT(dev_priv->dev)) {
+ pp_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ pp_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ val = I915_READ(pp_reg);
+ if (!(val & PANEL_POWER_ON) ||
+ ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
+ locked = false;
+
+ if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
+ panel_pipe = PIPE_B;
+
+ WARN(panel_pipe == pipe && locked,
+ "panel assertion failure, pipe %c regs locked\n",
+ pipe_name(pipe));
+}
+
int intel_panel_init(struct intel_panel *panel,
struct drm_display_mode *fixed_mode,
struct drm_display_mode *downclock_mode)
diff --git a/drivers/gpu/drm/i915/intel_pll.c b/drivers/gpu/drm/i915/intel_pll.c
new file mode 100644
index 0000000..fed6ba7
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_pll.c
@@ -0,0 +1,1779 @@
+/*
+ * Copyright © 2006-2007, 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric at anholt.net>
+ */
+
+#include "intel_drv.h"
+
+static const intel_limit_t intel_limits_i8xx_dac = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 908000, .max = 1512000 },
+ .n = { .min = 2, .max = 16 },
+ .m = { .min = 96, .max = 140 },
+ .m1 = { .min = 18, .max = 26 },
+ .m2 = { .min = 6, .max = 16 },
+ .p = { .min = 4, .max = 128 },
+ .p1 = { .min = 2, .max = 33 },
+ .p2 = { .dot_limit = 165000,
+ .p2_slow = 4, .p2_fast = 2 },
+};
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 908000, .max = 1512000 },
+ .n = { .min = 2, .max = 16 },
+ .m = { .min = 96, .max = 140 },
+ .m1 = { .min = 18, .max = 26 },
+ .m2 = { .min = 6, .max = 16 },
+ .p = { .min = 4, .max = 128 },
+ .p1 = { .min = 2, .max = 33 },
+ .p2 = { .dot_limit = 165000,
+ .p2_slow = 4, .p2_fast = 4 },
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 908000, .max = 1512000 },
+ .n = { .min = 2, .max = 16 },
+ .m = { .min = 96, .max = 140 },
+ .m1 = { .min = 18, .max = 26 },
+ .m2 = { .min = 6, .max = 16 },
+ .p = { .min = 4, .max = 128 },
+ .p1 = { .min = 1, .max = 6 },
+ .p2 = { .dot_limit = 165000,
+ .p2_slow = 14, .p2_fast = 7 },
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1400000, .max = 2800000 },
+ .n = { .min = 1, .max = 6 },
+ .m = { .min = 70, .max = 120 },
+ .m1 = { .min = 8, .max = 18 },
+ .m2 = { .min = 3, .max = 7 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8 },
+ .p2 = { .dot_limit = 200000,
+ .p2_slow = 10, .p2_fast = 5 },
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1400000, .max = 2800000 },
+ .n = { .min = 1, .max = 6 },
+ .m = { .min = 70, .max = 120 },
+ .m1 = { .min = 8, .max = 18 },
+ .m2 = { .min = 3, .max = 7 },
+ .p = { .min = 7, .max = 98 },
+ .p1 = { .min = 1, .max = 8 },
+ .p2 = { .dot_limit = 112000,
+ .p2_slow = 14, .p2_fast = 7 },
+};
+
+
+static const intel_limit_t intel_limits_g4x_sdvo = {
+ .dot = { .min = 25000, .max = 270000 },
+ .vco = { .min = 1750000, .max = 3500000},
+ .n = { .min = 1, .max = 4 },
+ .m = { .min = 104, .max = 138 },
+ .m1 = { .min = 17, .max = 23 },
+ .m2 = { .min = 5, .max = 11 },
+ .p = { .min = 10, .max = 30 },
+ .p1 = { .min = 1, .max = 3},
+ .p2 = { .dot_limit = 270000,
+ .p2_slow = 10,
+ .p2_fast = 10
+ },
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
+ .dot = { .min = 22000, .max = 400000 },
+ .vco = { .min = 1750000, .max = 3500000},
+ .n = { .min = 1, .max = 4 },
+ .m = { .min = 104, .max = 138 },
+ .m1 = { .min = 16, .max = 23 },
+ .m2 = { .min = 5, .max = 11 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8},
+ .p2 = { .dot_limit = 165000,
+ .p2_slow = 10, .p2_fast = 5 },
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
+ .dot = { .min = 20000, .max = 115000 },
+ .vco = { .min = 1750000, .max = 3500000 },
+ .n = { .min = 1, .max = 3 },
+ .m = { .min = 104, .max = 138 },
+ .m1 = { .min = 17, .max = 23 },
+ .m2 = { .min = 5, .max = 11 },
+ .p = { .min = 28, .max = 112 },
+ .p1 = { .min = 2, .max = 8 },
+ .p2 = { .dot_limit = 0,
+ .p2_slow = 14, .p2_fast = 14
+ },
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
+ .dot = { .min = 80000, .max = 224000 },
+ .vco = { .min = 1750000, .max = 3500000 },
+ .n = { .min = 1, .max = 3 },
+ .m = { .min = 104, .max = 138 },
+ .m1 = { .min = 17, .max = 23 },
+ .m2 = { .min = 5, .max = 11 },
+ .p = { .min = 14, .max = 42 },
+ .p1 = { .min = 2, .max = 6 },
+ .p2 = { .dot_limit = 0,
+ .p2_slow = 7, .p2_fast = 7
+ },
+};
+
+static const intel_limit_t intel_limits_pineview_sdvo = {
+ .dot = { .min = 20000, .max = 400000},
+ .vco = { .min = 1700000, .max = 3500000 },
+ /* Pineview's Ncounter is a ring counter */
+ .n = { .min = 3, .max = 6 },
+ .m = { .min = 2, .max = 256 },
+ /* Pineview only has one combined m divider, which we treat as m2. */
+ .m1 = { .min = 0, .max = 0 },
+ .m2 = { .min = 0, .max = 254 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8 },
+ .p2 = { .dot_limit = 200000,
+ .p2_slow = 10, .p2_fast = 5 },
+};
+
+static const intel_limit_t intel_limits_pineview_lvds = {
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1700000, .max = 3500000 },
+ .n = { .min = 3, .max = 6 },
+ .m = { .min = 2, .max = 256 },
+ .m1 = { .min = 0, .max = 0 },
+ .m2 = { .min = 0, .max = 254 },
+ .p = { .min = 7, .max = 112 },
+ .p1 = { .min = 1, .max = 8 },
+ .p2 = { .dot_limit = 112000,
+ .p2_slow = 14, .p2_fast = 14 },
+};
+
+/* Ironlake / Sandybridge
+ *
+ * We calculate clock using (register_value + 2) for N/M1/M2, so here
+ * the range value for them is (actual_value - 2).
+ */
+static const intel_limit_t intel_limits_ironlake_dac = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000 },
+ .n = { .min = 1, .max = 5 },
+ .m = { .min = 79, .max = 127 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8 },
+ .p2 = { .dot_limit = 225000,
+ .p2_slow = 10, .p2_fast = 5 },
+};
+
+static const intel_limit_t intel_limits_ironlake_single_lvds = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000 },
+ .n = { .min = 1, .max = 3 },
+ .m = { .min = 79, .max = 118 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 28, .max = 112 },
+ .p1 = { .min = 2, .max = 8 },
+ .p2 = { .dot_limit = 225000,
+ .p2_slow = 14, .p2_fast = 14 },
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000 },
+ .n = { .min = 1, .max = 3 },
+ .m = { .min = 79, .max = 127 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 14, .max = 56 },
+ .p1 = { .min = 2, .max = 8 },
+ .p2 = { .dot_limit = 225000,
+ .p2_slow = 7, .p2_fast = 7 },
+};
+
+/* LVDS 100mhz refclk limits. */
+static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000 },
+ .n = { .min = 1, .max = 2 },
+ .m = { .min = 79, .max = 126 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 28, .max = 112 },
+ .p1 = { .min = 2, .max = 8 },
+ .p2 = { .dot_limit = 225000,
+ .p2_slow = 14, .p2_fast = 14 },
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000 },
+ .n = { .min = 1, .max = 3 },
+ .m = { .min = 79, .max = 126 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 14, .max = 42 },
+ .p1 = { .min = 2, .max = 6 },
+ .p2 = { .dot_limit = 225000,
+ .p2_slow = 7, .p2_fast = 7 },
+};
+
+static const intel_limit_t intel_limits_vlv = {
+ /*
+ * These are the data rate limits (measured in fast clocks)
+ * since those are the strictest limits we have. The fast
+ * clock and actual rate limits are more relaxed, so checking
+ * them would make no difference.
+ */
+ .dot = { .min = 25000 * 5, .max = 270000 * 5 },
+ .vco = { .min = 4000000, .max = 6000000 },
+ .n = { .min = 1, .max = 7 },
+ .m1 = { .min = 2, .max = 3 },
+ .m2 = { .min = 11, .max = 156 },
+ .p1 = { .min = 2, .max = 3 },
+ .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
+};
+
+static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
+ int refclk)
+{
+ struct drm_device *dev = crtc->dev;
+ const intel_limit_t *limit;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_is_dual_link_lvds(dev)) {
+ if (refclk == 100000)
+ limit = &intel_limits_ironlake_dual_lvds_100m;
+ else
+ limit = &intel_limits_ironlake_dual_lvds;
+ } else {
+ if (refclk == 100000)
+ limit = &intel_limits_ironlake_single_lvds_100m;
+ else
+ limit = &intel_limits_ironlake_single_lvds;
+ }
+ } else
+ limit = &intel_limits_ironlake_dac;
+
+ return limit;
+}
+
+static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ const intel_limit_t *limit;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_is_dual_link_lvds(dev))
+ limit = &intel_limits_g4x_dual_channel_lvds;
+ else
+ limit = &intel_limits_g4x_single_channel_lvds;
+ } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
+ limit = &intel_limits_g4x_hdmi;
+ } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
+ limit = &intel_limits_g4x_sdvo;
+ } else /* The option is for other outputs */
+ limit = &intel_limits_i9xx_sdvo;
+
+ return limit;
+}
+
+const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
+{
+ struct drm_device *dev = crtc->dev;
+ const intel_limit_t *limit;
+
+ if (HAS_PCH_SPLIT(dev))
+ limit = intel_ironlake_limit(crtc, refclk);
+ else if (IS_G4X(dev)) {
+ limit = intel_g4x_limit(crtc);
+ } else if (IS_PINEVIEW(dev)) {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ limit = &intel_limits_pineview_lvds;
+ else
+ limit = &intel_limits_pineview_sdvo;
+ } else if (IS_VALLEYVIEW(dev)) {
+ limit = &intel_limits_vlv;
+ } else if (!IS_GEN2(dev)) {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ limit = &intel_limits_i9xx_lvds;
+ else
+ limit = &intel_limits_i9xx_sdvo;
+ } else {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ limit = &intel_limits_i8xx_lvds;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
+ limit = &intel_limits_i8xx_dvo;
+ else
+ limit = &intel_limits_i8xx_dac;
+ }
+ return limit;
+}
+
+#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
+
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+static bool intel_PLL_is_valid(struct drm_device *dev,
+ const intel_limit_t *limit,
+ const intel_clock_t *clock)
+{
+ if (clock->n < limit->n.min || limit->n.max < clock->n)
+ INTELPllInvalid("n out of range\n");
+ if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+ INTELPllInvalid("p1 out of range\n");
+ if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+ INTELPllInvalid("m2 out of range\n");
+ if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+ INTELPllInvalid("m1 out of range\n");
+
+ if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
+ if (clock->m1 <= clock->m2)
+ INTELPllInvalid("m1 <= m2\n");
+
+ if (!IS_VALLEYVIEW(dev)) {
+ if (clock->p < limit->p.min || limit->p.max < clock->p)
+ INTELPllInvalid("p out of range\n");
+ if (clock->m < limit->m.min || limit->m.max < clock->m)
+ INTELPllInvalid("m out of range\n");
+ }
+
+ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+ INTELPllInvalid("vco out of range\n");
+ /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+ * connector, etc., rather than just a single range.
+ */
+ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+ INTELPllInvalid("dot out of range\n");
+
+ return true;
+}
+
+static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
+{
+ return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
+}
+
+static void i9xx_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = i9xx_dpll_compute_m(clock);
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
+ return;
+ clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+}
+
+/* m1 is reserved as 0 in Pineview, n is a ring counter */
+static void pineview_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = clock->m2 + 2;
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n == 0 || clock->p == 0))
+ return;
+ clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+}
+
+static void vlv_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = clock->m1 * clock->m2;
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n == 0 || clock->p == 0))
+ return;
+ clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+}
+
+static bool
+g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ int max_n;
+ bool found;
+ /* approximately equals target * 0.00585 */
+ int err_most = (target >> 8) + (target >> 9);
+ found = false;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_is_dual_link_lvds(dev))
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+ max_n = limit->n.max;
+ /* based on hardware requirement, prefer smaller n to precision */
+ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+ /* based on hardware requirement, prefere larger m1,m2 */
+ for (clock.m1 = limit->m1.max;
+ clock.m1 >= limit->m1.min; clock.m1--) {
+ for (clock.m2 = limit->m2.max;
+ clock.m2 >= limit->m2.min; clock.m2--) {
+ for (clock.p1 = limit->p1.max;
+ clock.p1 >= limit->p1.min; clock.p1--) {
+ int this_err;
+
+ i9xx_clock(refclk, &clock);
+ if (!intel_PLL_is_valid(dev, limit,
+ &clock))
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err_most) {
+ *best_clock = clock;
+ err_most = this_err;
+ max_n = clock.n;
+ found = true;
+ }
+ }
+ }
+ }
+ }
+ return found;
+}
+
+static bool
+vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ unsigned int bestppm = 1000000;
+ /* min update 19.2 MHz */
+ int max_n = min(limit->n.max, refclk / 19200);
+ bool found = false;
+
+ target *= 5; /* fast clock */
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ /* based on hardware requirement, prefer smaller n to precision */
+ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+ for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
+ for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
+ clock.p2 -= clock.p2 > 10 ? 2 : 1) {
+ clock.p = clock.p1 * clock.p2;
+ /* based on hardware requirement, prefer bigger m1,m2 values */
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+ unsigned int ppm, diff;
+
+ clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
+ refclk * clock.m1);
+
+ vlv_clock(refclk, &clock);
+
+ if (!intel_PLL_is_valid(dev, limit,
+ &clock))
+ continue;
+
+ diff = abs(clock.dot - target);
+ ppm = div_u64(1000000ULL * diff, target);
+
+ if (ppm < 100 && clock.p > best_clock->p) {
+ bestppm = 0;
+ *best_clock = clock;
+ found = true;
+ }
+
+ if (bestppm >= 10 && ppm < bestppm - 10) {
+ bestppm = ppm;
+ *best_clock = clock;
+ found = true;
+ }
+ }
+ }
+ }
+ }
+
+ return found;
+}
+
+static bool
+pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ int err = target;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ /*
+ * For LVDS just rely on its current settings for dual-channel.
+ * We haven't figured out how to reliably set up different
+ * single/dual channel state, if we even can.
+ */
+ if (intel_is_dual_link_lvds(dev))
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+ clock.m1++) {
+ for (clock.m2 = limit->m2.min;
+ clock.m2 <= limit->m2.max; clock.m2++) {
+ for (clock.n = limit->n.min;
+ clock.n <= limit->n.max; clock.n++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max; clock.p1++) {
+ int this_err;
+
+ pineview_clock(refclk, &clock);
+ if (!intel_PLL_is_valid(dev, limit,
+ &clock))
+ continue;
+ if (match_clock &&
+ clock.p != match_clock->p)
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+ }
+
+ return (err != target);
+}
+
+static bool
+i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ int err = target;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ /*
+ * For LVDS just rely on its current settings for dual-channel.
+ * We haven't figured out how to reliably set up different
+ * single/dual channel state, if we even can.
+ */
+ if (intel_is_dual_link_lvds(dev))
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+ clock.m1++) {
+ for (clock.m2 = limit->m2.min;
+ clock.m2 <= limit->m2.max; clock.m2++) {
+ if (clock.m2 >= clock.m1)
+ break;
+ for (clock.n = limit->n.min;
+ clock.n <= limit->n.max; clock.n++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max; clock.p1++) {
+ int this_err;
+
+ i9xx_clock(refclk, &clock);
+ if (!intel_PLL_is_valid(dev, limit,
+ &clock))
+ continue;
+ if (match_clock &&
+ clock.p != match_clock->p)
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+ }
+
+ return (err != target);
+}
+
+static int i9xx_pll_refclk(struct drm_device *dev,
+ const struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll = pipe_config->dpll_hw_state.dpll;
+
+ if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
+ return dev_priv->vbt.lvds_ssc_freq;
+ else if (HAS_PCH_SPLIT(dev))
+ return 120000;
+ else if (!IS_GEN2(dev))
+ return 96000;
+ else
+ return 48000;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = pipe_config->cpu_transcoder;
+ u32 dpll = pipe_config->dpll_hw_state.dpll;
+ u32 fp;
+ intel_clock_t clock;
+ int refclk = i9xx_pll_refclk(dev, pipe_config);
+
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = pipe_config->dpll_hw_state.fp0;
+ else
+ fp = pipe_config->dpll_hw_state.fp1;
+
+ clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+ if (IS_PINEVIEW(dev)) {
+ clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
+ clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ } else {
+ clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+ clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ }
+
+ if (!IS_GEN2(dev)) {
+ if (IS_PINEVIEW(dev))
+ clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
+ else
+ clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+ switch (dpll & DPLL_MODE_MASK) {
+ case DPLLB_MODE_DAC_SERIAL:
+ clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
+ 5 : 10;
+ break;
+ case DPLLB_MODE_LVDS:
+ clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
+ 7 : 14;
+ break;
+ default:
+ DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
+ "mode\n", (int)(dpll & DPLL_MODE_MASK));
+ return;
+ }
+
+ if (IS_PINEVIEW(dev))
+ pineview_clock(refclk, &clock);
+ else
+ i9xx_clock(refclk, &clock);
+ } else {
+ u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
+ bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
+
+ if (is_lvds) {
+ clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+ if (lvds & LVDS_CLKB_POWER_UP)
+ clock.p2 = 7;
+ else
+ clock.p2 = 14;
+ } else {
+ if (dpll & PLL_P1_DIVIDE_BY_TWO)
+ clock.p1 = 2;
+ else {
+ clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+ }
+ if (dpll & PLL_P2_DIVIDE_BY_4)
+ clock.p2 = 4;
+ else
+ clock.p2 = 2;
+ }
+
+ i9xx_clock(refclk, &clock);
+ }
+
+ /*
+ * This value includes pixel_multiplier. We will use
+ * port_clock to compute adjusted_mode.crtc_clock in the
+ * encoder's get_config() function.
+ */
+ pipe_config->port_clock = clock.dot;
+}
+
+void vlv_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = pipe_config->cpu_transcoder;
+ intel_clock_t clock;
+ u32 mdiv;
+ int refclk = 100000;
+
+ mutex_lock(&dev_priv->dpio_lock);
+ mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
+ clock.m2 = mdiv & DPIO_M2DIV_MASK;
+ clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
+ clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
+ clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
+
+ vlv_clock(refclk, &clock);
+
+ /* clock.dot is the fast clock */
+ pipe_config->port_clock = clock.dot / 5;
+}
+
+void ironlake_pch_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+
+ /* read out port_clock from the DPLL */
+ i9xx_crtc_clock_get(crtc, pipe_config);
+
+ /*
+ * This value does not include pixel_multiplier.
+ * We will check that port_clock and adjusted_mode.crtc_clock
+ * agree once we know their relationship in the encoder's
+ * get_config() function.
+ */
+ pipe_config->adjusted_mode.crtc_clock =
+ intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
+ &pipe_config->fdi_m_n);
+}
+
+static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
+{
+ return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
+}
+
+uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
+ u32 *fp, intel_clock_t *reduced_clock, u32 *fp2)
+{
+ struct drm_crtc *crtc = &intel_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder;
+ uint32_t dpll;
+ int factor, num_connectors = 0;
+ bool is_lvds = false, is_sdvo = false;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ switch (intel_encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ case INTEL_OUTPUT_HDMI:
+ is_sdvo = true;
+ break;
+ }
+
+ num_connectors++;
+ }
+
+ /* Enable autotuning of the PLL clock (if permissible) */
+ factor = 21;
+ if (is_lvds) {
+ if ((intel_panel_use_ssc(dev_priv) &&
+ dev_priv->vbt.lvds_ssc_freq == 100000) ||
+ (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
+ factor = 25;
+ } else if (intel_crtc->config.sdvo_tv_clock)
+ factor = 20;
+
+ if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
+ *fp |= FP_CB_TUNE;
+
+ if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
+ *fp2 |= FP_CB_TUNE;
+
+ dpll = 0;
+
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+
+ dpll |= (intel_crtc->config.pixel_multiplier - 1)
+ << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+
+ if (is_sdvo)
+ dpll |= DPLL_SDVO_HIGH_SPEED;
+ if (intel_crtc->config.has_dp_encoder)
+ dpll |= DPLL_SDVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ /* also FPA1 */
+ dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+
+ switch (intel_crtc->config.dpll.p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ return dpll | DPLL_VCO_ENABLE;
+}
+
+int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int refclk;
+
+ if (IS_VALLEYVIEW(dev)) {
+ refclk = 100000;
+ } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ refclk = dev_priv->vbt.lvds_ssc_freq;
+ DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+ } else if (!IS_GEN2(dev)) {
+ refclk = 96000;
+ } else {
+ refclk = 48000;
+ }
+
+ return refclk;
+}
+
+int ironlake_get_refclk(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *encoder;
+ int num_connectors = 0;
+ bool is_lvds = false;
+
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ }
+ num_connectors++;
+ }
+
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
+ dev_priv->vbt.lvds_ssc_freq);
+ return dev_priv->vbt.lvds_ssc_freq;
+ }
+
+ return 120000;
+}
+
+/* Only for pre-ILK configs */
+void assert_pll(struct drm_i915_private *dev_priv,
+ enum pipe pipe, bool state)
+{
+ int reg;
+ u32 val;
+ bool cur_state;
+
+ reg = DPLL(pipe);
+ val = I915_READ(reg);
+ cur_state = !!(val & DPLL_VCO_ENABLE);
+ WARN(cur_state != state,
+ "PLL state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+
+/* XXX: the dsi pll is shared between MIPI DSI ports */
+void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
+{
+ u32 val;
+ bool cur_state;
+
+ mutex_lock(&dev_priv->dpio_lock);
+ val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ cur_state = val & DSI_PLL_VCO_EN;
+ WARN(cur_state != state,
+ "DSI PLL state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+
+/* For ILK+ */
+void assert_shared_dpll(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ bool state)
+{
+ bool cur_state;
+ struct intel_dpll_hw_state hw_state;
+
+ if (HAS_PCH_LPT(dev_priv->dev)) {
+ DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
+ return;
+ }
+
+ if (WARN (!pll,
+ "asserting DPLL %s with no DPLL\n", state_string(state)))
+ return;
+
+ cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
+ WARN(cur_state != state,
+ "%s assertion failure (expected %s, current %s)\n",
+ pll->name, state_string(state), state_string(cur_state));
+}
+
+struct intel_shared_dpll *
+intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+
+ if (crtc->config.shared_dpll < 0)
+ return NULL;
+
+ return &dev_priv->shared_dplls[crtc->config.shared_dpll];
+}
+
+/**
+ * ironlake_enable_shared_dpll - enable PCH PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to enable
+ *
+ * The PCH PLL needs to be enabled before the PCH transcoder, since it
+ * drives the transcoder clock.
+ */
+void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
+
+ /* PCH PLLs only available on ILK, SNB and IVB */
+ BUG_ON(INTEL_INFO(dev)->gen < 5);
+ if (WARN_ON(pll == NULL))
+ return;
+
+ if (WARN_ON(pll->refcount == 0))
+ return;
+
+ DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
+ pll->name, pll->active, pll->on,
+ crtc->base.base.id);
+
+ if (pll->active++) {
+ WARN_ON(!pll->on);
+ assert_shared_dpll_enabled(dev_priv, pll);
+ return;
+ }
+ WARN_ON(pll->on);
+
+ DRM_DEBUG_KMS("enabling %s\n", pll->name);
+ pll->enable(dev_priv, pll);
+ pll->on = true;
+}
+
+void intel_disable_shared_dpll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
+
+ /* PCH only available on ILK+ */
+ BUG_ON(INTEL_INFO(dev)->gen < 5);
+ if (WARN_ON(pll == NULL))
+ return;
+
+ if (WARN_ON(pll->refcount == 0))
+ return;
+
+ DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
+ pll->name, pll->active, pll->on,
+ crtc->base.base.id);
+
+ if (WARN_ON(pll->active == 0)) {
+ assert_shared_dpll_disabled(dev_priv, pll);
+ return;
+ }
+
+ assert_shared_dpll_enabled(dev_priv, pll);
+ WARN_ON(!pll->on);
+ if (--pll->active)
+ return;
+
+ DRM_DEBUG_KMS("disabling %s\n", pll->name);
+ pll->disable(dev_priv, pll);
+ pll->on = false;
+}
+
+void intel_put_shared_dpll(struct intel_crtc *crtc)
+{
+ struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
+
+ if (pll == NULL)
+ return;
+
+ if (pll->refcount == 0) {
+ WARN(1, "bad %s refcount\n", pll->name);
+ return;
+ }
+
+ if (--pll->refcount == 0) {
+ WARN_ON(pll->on);
+ WARN_ON(pll->active);
+ }
+
+ crtc->config.shared_dpll = DPLL_ID_PRIVATE;
+}
+
+struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
+ enum intel_dpll_id i;
+
+ if (pll) {
+ DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
+ crtc->base.base.id, pll->name);
+ intel_put_shared_dpll(crtc);
+ }
+
+ if (HAS_PCH_IBX(dev_priv->dev)) {
+ /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
+ i = (enum intel_dpll_id) crtc->pipe;
+ pll = &dev_priv->shared_dplls[i];
+
+ DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
+ crtc->base.base.id, pll->name);
+
+ goto found;
+ }
+
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ pll = &dev_priv->shared_dplls[i];
+
+ /* Only want to check enabled timings first */
+ if (pll->refcount == 0)
+ continue;
+
+ if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state,
+ sizeof(pll->hw_state)) == 0) {
+ DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
+ crtc->base.base.id,
+ pll->name, pll->refcount, pll->active);
+
+ goto found;
+ }
+ }
+
+ /* Ok no matching timings, maybe there's a free one? */
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ pll = &dev_priv->shared_dplls[i];
+ if (pll->refcount == 0) {
+ DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
+ crtc->base.base.id, pll->name);
+ goto found;
+ }
+ }
+
+ return NULL;
+
+found:
+ crtc->config.shared_dpll = i;
+ DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
+ pipe_name(crtc->pipe));
+
+ if (pll->active == 0) {
+ memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
+ sizeof(pll->hw_state));
+
+ DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
+ WARN_ON(pll->on);
+ assert_shared_dpll_disabled(dev_priv, pll);
+
+ pll->mode_set(dev_priv, pll);
+ }
+ pll->refcount++;
+
+ return pll;
+}
+
+void intel_increase_pllclock(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int dpll_reg = DPLL(pipe);
+ int dpll;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ if (!dev_priv->lvds_downclock_avail)
+ return;
+
+ dpll = I915_READ(dpll_reg);
+ if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
+ DRM_DEBUG_DRIVER("upclocking LVDS\n");
+
+ assert_panel_unlocked(dev_priv, pipe);
+
+ dpll &= ~DISPLAY_RATE_SELECT_FPA1;
+ I915_WRITE(dpll_reg, dpll);
+ intel_wait_for_vblank(dev, pipe);
+
+ dpll = I915_READ(dpll_reg);
+ if (dpll & DISPLAY_RATE_SELECT_FPA1)
+ DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
+ }
+}
+
+void intel_decrease_pllclock(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ if (!dev_priv->lvds_downclock_avail)
+ return;
+
+ /*
+ * Since this is called by a timer, we should never get here in
+ * the manual case.
+ */
+ if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
+ int pipe = intel_crtc->pipe;
+ int dpll_reg = DPLL(pipe);
+ int dpll;
+
+ DRM_DEBUG_DRIVER("downclocking LVDS\n");
+
+ assert_panel_unlocked(dev_priv, pipe);
+
+ dpll = I915_READ(dpll_reg);
+ dpll |= DISPLAY_RATE_SELECT_FPA1;
+ I915_WRITE(dpll_reg, dpll);
+ intel_wait_for_vblank(dev, pipe);
+ dpll = I915_READ(dpll_reg);
+ if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
+ DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
+ }
+
+}
+
+void vlv_enable_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int reg = DPLL(crtc->pipe);
+ u32 dpll = crtc->config.dpll_hw_state.dpll;
+
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ /* No really, not for ILK+ */
+ BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
+
+ /* PLL is protected by panel, make sure we can write it */
+ if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
+ assert_panel_unlocked(dev_priv, crtc->pipe);
+
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150);
+
+ if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+ DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
+
+ I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
+ POSTING_READ(DPLL_MD(crtc->pipe));
+
+ /* We do this three times for luck */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+}
+
+void i9xx_enable_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int reg = DPLL(crtc->pipe);
+ u32 dpll = crtc->config.dpll_hw_state.dpll;
+
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ /* No really, not for ILK+ */
+ BUG_ON(INTEL_INFO(dev)->gen >= 5);
+
+ /* PLL is protected by panel, make sure we can write it */
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ assert_panel_unlocked(dev_priv, crtc->pipe);
+
+ I915_WRITE(reg, dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(reg);
+ udelay(150);
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ I915_WRITE(DPLL_MD(crtc->pipe),
+ crtc->config.dpll_hw_state.dpll_md);
+ } else {
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(reg, dpll);
+ }
+
+ /* We do this three times for luck */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+ I915_WRITE(reg, dpll);
+ POSTING_READ(reg);
+ udelay(150); /* wait for warmup */
+}
+
+/**
+ * i9xx_disable_pll - disable a PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to disable
+ *
+ * Disable the PLL for @pipe, making sure the pipe is off first.
+ *
+ * Note! This is for pre-ILK only.
+ */
+void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ /* Don't disable pipe A or pipe A PLLs if needed */
+ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Make sure the pipe isn't still relying on us */
+ assert_pipe_disabled(dev_priv, pipe);
+
+ I915_WRITE(DPLL(pipe), 0);
+ POSTING_READ(DPLL(pipe));
+}
+
+void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ u32 val = 0;
+
+ /* Make sure the pipe isn't still relying on us */
+ assert_pipe_disabled(dev_priv, pipe);
+
+ /*
+ * Leave integrated clock source and reference clock enabled for pipe B.
+ * The latter is needed for VGA hotplug / manual detection.
+ */
+ if (pipe == PIPE_B)
+ val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
+ I915_WRITE(DPLL(pipe), val);
+ POSTING_READ(DPLL(pipe));
+}
+
+static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
+{
+ return (1 << dpll->n) << 16 | dpll->m2;
+}
+
+uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
+{
+ return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
+}
+
+static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
+ intel_clock_t *reduced_clock)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ u32 fp, fp2 = 0;
+
+ if (IS_PINEVIEW(dev)) {
+ fp = pnv_dpll_compute_fp(&crtc->config.dpll);
+ if (reduced_clock)
+ fp2 = pnv_dpll_compute_fp(reduced_clock);
+ } else {
+ fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
+ if (reduced_clock)
+ fp2 = i9xx_dpll_compute_fp(reduced_clock);
+ }
+
+ I915_WRITE(FP0(pipe), fp);
+ crtc->config.dpll_hw_state.fp0 = fp;
+
+ crtc->lowfreq_avail = false;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
+ reduced_clock && i915.powersave) {
+ I915_WRITE(FP1(pipe), fp2);
+ crtc->config.dpll_hw_state.fp1 = fp2;
+ crtc->lowfreq_avail = true;
+ } else {
+ I915_WRITE(FP1(pipe), fp);
+ crtc->config.dpll_hw_state.fp1 = fp;
+ }
+}
+
+static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
+ pipe)
+{
+ u32 reg_val;
+
+ /*
+ * PLLB opamp always calibrates to max value of 0x3f, force enable it
+ * and set it to a reasonable value instead.
+ */
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
+ reg_val &= 0xffffff00;
+ reg_val |= 0x00000030;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
+ reg_val &= 0x8cffffff;
+ reg_val = 0x8c000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
+ reg_val &= 0xffffff00;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
+
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
+ reg_val &= 0x00ffffff;
+ reg_val |= 0xb0000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
+}
+
+void vlv_update_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ u32 dpll, mdiv;
+ u32 bestn, bestm1, bestm2, bestp1, bestp2;
+ u32 coreclk, reg_val, dpll_md;
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ bestn = crtc->config.dpll.n;
+ bestm1 = crtc->config.dpll.m1;
+ bestm2 = crtc->config.dpll.m2;
+ bestp1 = crtc->config.dpll.p1;
+ bestp2 = crtc->config.dpll.p2;
+
+ /* See eDP HDMI DPIO driver vbios notes doc */
+
+ /* PLL B needs special handling */
+ if (pipe)
+ vlv_pllb_recal_opamp(dev_priv, pipe);
+
+ /* Set up Tx target for periodic Rcomp update */
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
+
+ /* Disable target IRef on PLL */
+ reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
+ reg_val &= 0x00ffffff;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
+
+ /* Disable fast lock */
+ vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
+
+ /* Set idtafcrecal before PLL is enabled */
+ mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
+ mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
+ mdiv |= ((bestn << DPIO_N_SHIFT));
+ mdiv |= (1 << DPIO_K_SHIFT);
+
+ /*
+ * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
+ * but we don't support that).
+ * Note: don't use the DAC post divider as it seems unstable.
+ */
+ mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
+
+ mdiv |= DPIO_ENABLE_CALIBRATION;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
+
+ /* Set HBR and RBR LPF coefficients */
+ if (crtc->config.port_clock == 162000 ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
+ 0x009f0003);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
+ 0x00d0000f);
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
+ /* Use SSC source */
+ if (!pipe)
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df40000);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df70000);
+ } else { /* HDMI or VGA */
+ /* Use bend source */
+ if (!pipe)
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df70000);
+ else
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
+ 0x0df40000);
+ }
+
+ coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
+ coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
+ coreclk |= 0x01000000;
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
+
+ vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
+
+ /*
+ * Enable DPIO clock input. We should never disable the reference
+ * clock for pipe B, since VGA hotplug / manual detection depends
+ * on it.
+ */
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ /* We should never disable this, set it here for state tracking */
+ if (pipe == PIPE_B)
+ dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+ dpll |= DPLL_VCO_ENABLE;
+ crtc->config.dpll_hw_state.dpll = dpll;
+
+ dpll_md = (crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ crtc->config.dpll_hw_state.dpll_md = dpll_md;
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
+
+void i9xx_update_pll(struct intel_crtc *crtc, intel_clock_t *reduced_clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll;
+ bool is_sdvo;
+ struct dpll *clock = &crtc->config.dpll;
+
+ i9xx_update_pll_dividers(crtc, reduced_clock);
+
+ is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
+ dpll |= (crtc->config.pixel_multiplier - 1)
+ << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+
+ if (is_sdvo)
+ dpll |= DPLL_SDVO_HIGH_SPEED;
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
+ dpll |= DPLL_SDVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ if (IS_PINEVIEW(dev))
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+ else {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (IS_G4X(dev) && reduced_clock)
+ dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ }
+ switch (clock->p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+ if (INTEL_INFO(dev)->gen >= 4)
+ dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+
+ if (crtc->config.sdvo_tv_clock)
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ crtc->config.dpll_hw_state.dpll = dpll;
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ u32 dpll_md = (crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ crtc->config.dpll_hw_state.dpll_md = dpll_md;
+ }
+}
+
+void i8xx_update_pll(struct intel_crtc *crtc, intel_clock_t *reduced_clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll;
+ struct dpll *clock = &crtc->config.dpll;
+
+ i9xx_update_pll_dividers(crtc, reduced_clock);
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ } else {
+ if (clock->p1 == 2)
+ dpll |= PLL_P1_DIVIDE_BY_TWO;
+ else
+ dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (clock->p2 == 4)
+ dpll |= PLL_P2_DIVIDE_BY_4;
+ }
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ dpll |= DPLL_DVO_2X_MODE;
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ crtc->config.dpll_hw_state.dpll = dpll;
+}
+
+void intel_cpu_pll_init(struct drm_device *dev)
+{
+ if (HAS_DDI(dev))
+ intel_ddi_pll_init(dev);
+}
+
+static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
+{
+ uint32_t val;
+
+ val = I915_READ(PCH_DPLL(pll->id));
+ hw_state->dpll = val;
+ hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
+ hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
+
+ return val & DPLL_VCO_ENABLE;
+}
+
+static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0);
+ I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1);
+}
+
+static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+ bool enabled;
+
+ WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+
+ val = I915_READ(PCH_DREF_CONTROL);
+ enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
+ DREF_SUPERSPREAD_SOURCE_MASK));
+ WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+}
+
+static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ /* PCH refclock must be enabled first */
+ ibx_assert_pch_refclk_enabled(dev_priv);
+
+ I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(PCH_DPLL(pll->id));
+ udelay(150);
+
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
+ POSTING_READ(PCH_DPLL(pll->id));
+ udelay(200);
+}
+
+static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *crtc;
+
+ /* Make sure no transcoder isn't still depending on us. */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ if (intel_crtc_to_shared_dpll(crtc) == pll)
+ assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
+ }
+
+ I915_WRITE(PCH_DPLL(pll->id), 0);
+ POSTING_READ(PCH_DPLL(pll->id));
+ udelay(200);
+}
+
+static char *ibx_pch_dpll_names[] = {
+ "PCH DPLL A",
+ "PCH DPLL B",
+};
+
+static void ibx_pch_dpll_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ dev_priv->num_shared_dpll = 2;
+
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ dev_priv->shared_dplls[i].id = i;
+ dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
+ dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
+ dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
+ dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
+ dev_priv->shared_dplls[i].get_hw_state =
+ ibx_pch_dpll_get_hw_state;
+ }
+}
+
+void intel_shared_dpll_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+ ibx_pch_dpll_init(dev);
+ else
+ dev_priv->num_shared_dpll = 0;
+
+ BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
+}
+
+
+void intel_pll_init(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
+ dev_priv->display.find_dpll = g4x_find_best_dpll;
+ else if (IS_VALLEYVIEW(dev))
+ dev_priv->display.find_dpll = vlv_find_best_dpll;
+ else if (IS_PINEVIEW(dev))
+ dev_priv->display.find_dpll = pnv_find_best_dpll;
+ else
+ dev_priv->display.find_dpll = i9xx_find_best_dpll;
+}
--
1.9.0
More information about the Intel-gfx
mailing list