[Intel-gfx] [PATCH 28/71] drm/i915/chv: Added CHV specific register read and write
Deepak S
deepak.s at linux.intel.com
Fri Apr 18 10:12:05 CEST 2014
On Friday 18 April 2014 05:58 AM, Ben Widawsky wrote:
> On Wed, Apr 09, 2014 at 01:28:26PM +0300, ville.syrjala at linux.intel.com wrote:
>> From: Deepak S <deepak.s at intel.com>
>>
>> Support to individually control Media/Render well based on the register access.
>> Add CHV specific write function to habdle difference between registers
>> that are sadowed vs those that need forcewake even for writes.
>>
>> v2: Drop write FIFO for CHV and add comman well forcewake (Ville)
>>
>> Signed-off-by: Deepak S <deepak.s at intel.com>
>> [vsyrjala: Move the register range macros into intel_uncore.c]
>> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_uncore.c | 139 +++++++++++++++++++++++++++++++++---
>> 1 file changed, 131 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
>> index 823d699..8e3c686 100644
>> --- a/drivers/gpu/drm/i915/intel_uncore.c
>> +++ b/drivers/gpu/drm/i915/intel_uncore.c
>> @@ -495,6 +495,31 @@ void assert_force_wake_inactive(struct drm_i915_private *dev_priv)
>> ((reg) >= 0x22000 && (reg) < 0x24000) ||\
>> ((reg) >= 0x30000 && (reg) < 0x40000))
>>
>> +#define FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg) \
>> + (((reg) >= 0x2000 && (reg) < 0x4000) ||\
>> + ((reg) >= 0x5000 && (reg) < 0x8000) ||\
>> + ((reg) >= 0x8300 && (reg) < 0x8500) ||\
>> + ((reg) >= 0xB000 && (reg) < 0xC000) ||\
>> + ((reg) >= 0xE000 && (reg) < 0xE800))
>> +
>> +#define FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)\
>> + (((reg) >= 0x8800 && (reg) < 0x8900) ||\
>> + ((reg) >= 0xD000 && (reg) < 0xD800) ||\
>> + ((reg) >= 0x12000 && (reg) < 0x14000) ||\
>> + ((reg) >= 0x1A000 && (reg) < 0x1C000) ||\
>> + ((reg) >= 0x1E800 && (reg) < 0x1EA00) ||\
>> + ((reg) >= 0x30000 && (reg) < 0x40000))
>> +
>> +#define FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)\
>> + (((reg) >= 0x4000 && (reg) < 0x5000) ||\
>> + ((reg) >= 0x8000 && (reg) < 0x8300) ||\
>> + ((reg) >= 0x8500 && (reg) < 0x8600) ||\
>> + ((reg) >= 0x9000 && (reg) < 0xB000) ||\
>> + ((reg) >= 0xC000 && (reg) < 0xc800) ||\
>> + ((reg) >= 0xF000 && (reg) < 0x10000) ||\
>> + ((reg) >= 0x14000 && (reg) < 0x14400) ||\
>> + ((reg) >= 0x22000 && (reg) < 0x24000))
>> +
> To satisfy both Chris, and Ville, how about:
> #define REG_RANGE(reg, start, end) ((reg) >= (start) && (reg) < 0x5000)
> REG_RANGE(reg, 0x4000, 0x5000) || \
> REG_RANGE(reg, 0x8000, 0x8300) || \
> ...
>
> By the way, I spent my due diligence trying to find where these ranges
> come from, and have been unable. Doc name? I should have all the docs
> from Ville.
>
> I can't speak for the code generated, either.
>
hmm Ok, I will try to re factor this code. I will send the doc name
>> static void
>> ilk_dummy_write(struct drm_i915_private *dev_priv)
>> {
>> @@ -587,7 +612,48 @@ vlv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
>> REG_READ_FOOTER; \
>> }
>>
>> +#define __chv_read(x) \
>> +static u##x \
>> +chv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
>> + unsigned fwengine = 0; \
>> + REG_READ_HEADER(x); \
>> + if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_RENDER; \
>> + } \
>> + else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_MEDIA; \
>> + } \
>> + else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_ALL; \
>> + } \
>> + if (FORCEWAKE_RENDER & fwengine) { \
>> + if (dev_priv->uncore.fw_rendercount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> + fwengine); \
>> + } \
>> + if (FORCEWAKE_MEDIA & fwengine) { \
>> + if (dev_priv->uncore.fw_mediacount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> + fwengine); \
>> + } \
>> + val = __raw_i915_read##x(dev_priv, reg); \
>> + if (FORCEWAKE_RENDER & fwengine) { \
>> + if (dev_priv->uncore.fw_rendercount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> + fwengine); \
>> + } \
>> + if (FORCEWAKE_MEDIA & fwengine) { \
>> + if (dev_priv->uncore.fw_mediacount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> + fwengine); \
>> + } \
>> + REG_READ_FOOTER; \
>> +}
>>
>> +__chv_read(8)
>> +__chv_read(16)
>> +__chv_read(32)
>> +__chv_read(64)
>> __vlv_read(8)
>> __vlv_read(16)
>> __vlv_read(32)
>> @@ -605,6 +671,7 @@ __gen4_read(16)
>> __gen4_read(32)
>> __gen4_read(64)
>>
>> +#undef __chv_read
>> #undef __vlv_read
>> #undef __gen6_read
>> #undef __gen5_read
>> @@ -709,6 +776,49 @@ gen8_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace
>> REG_WRITE_FOOTER; \
>> }
>>
>> +#define __chv_write(x) \
>> +static void \
>> +chv_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
>> + unsigned fwengine = 0; \
>> + bool __needs_put = !is_gen8_shadowed(dev_priv, reg); \
>> + REG_WRITE_HEADER; \
>> + if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_RENDER; \
>> + } \
>> + else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_MEDIA; \
>> + } \
>> + else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) { \
>> + fwengine = FORCEWAKE_ALL; \
>> + } \
>> + if (__needs_put && (FORCEWAKE_RENDER & fwengine)) { \
>> + if (dev_priv->uncore.fw_rendercount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> + fwengine); \
>> + } \
>> + if (__needs_put && (FORCEWAKE_MEDIA & fwengine)) { \
>> + if (dev_priv->uncore.fw_mediacount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> + fwengine); \
>> + } \
>> + __raw_i915_write##x(dev_priv, reg, val); \
>> + if (__needs_put && (FORCEWAKE_RENDER & fwengine)) { \
>> + if (dev_priv->uncore.fw_rendercount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> + fwengine); \
>> + } \
>> + if (__needs_put && (FORCEWAKE_MEDIA & fwengine)) { \
>> + if (dev_priv->uncore.fw_mediacount++ == 0) \
>> + (dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> + fwengine); \
>> + } \
>> + REG_WRITE_FOOTER; \
>> +}
> Feels like this would be a lot neater if you let force_wake_put() handle
> this complexity. I guess our force_wake_funcs can't handle count. In
> that case we could even share the gen8_write family of functions. Was
> there some reason this can't work? (Again, forgive laziness)
I agree, but in gen8, we have only one well, But in CHV, we want to handle the Render and Media well up/down separately which helps in power saving.
>> +
>> +__chv_write(8)
>> +__chv_write(16)
>> +__chv_write(32)
>> +__chv_write(64)
> Similar to broadwell (my bad, I know), we probably only actually want to
> do this for read/write32. So we potentially could reduce the obj size by
> only doing it for that.
we might have the 64 bit read/write also? may be for Batch buffer address read?
>> __gen8_write(8)
>> __gen8_write(16)
>> __gen8_write(32)
>> @@ -730,6 +840,7 @@ __gen4_write(16)
>> __gen4_write(32)
>> __gen4_write(64)
>>
>> +#undef __chv_write
>> #undef __gen8_write
>> #undef __hsw_write
>> #undef __gen6_write
>> @@ -793,14 +904,26 @@ void intel_uncore_init(struct drm_device *dev)
>>
>> switch (INTEL_INFO(dev)->gen) {
>> default:
>> - dev_priv->uncore.funcs.mmio_writeb = gen8_write8;
>> - dev_priv->uncore.funcs.mmio_writew = gen8_write16;
>> - dev_priv->uncore.funcs.mmio_writel = gen8_write32;
>> - dev_priv->uncore.funcs.mmio_writeq = gen8_write64;
>> - dev_priv->uncore.funcs.mmio_readb = gen6_read8;
>> - dev_priv->uncore.funcs.mmio_readw = gen6_read16;
>> - dev_priv->uncore.funcs.mmio_readl = gen6_read32;
>> - dev_priv->uncore.funcs.mmio_readq = gen6_read64;
>> + if (IS_CHERRYVIEW(dev)) {
>> + dev_priv->uncore.funcs.mmio_writeb = chv_write8;
>> + dev_priv->uncore.funcs.mmio_writew = chv_write16;
>> + dev_priv->uncore.funcs.mmio_writel = chv_write32;
>> + dev_priv->uncore.funcs.mmio_writeq = chv_write64;
>> + dev_priv->uncore.funcs.mmio_readb = chv_read8;
>> + dev_priv->uncore.funcs.mmio_readw = chv_read16;
>> + dev_priv->uncore.funcs.mmio_readl = chv_read32;
>> + dev_priv->uncore.funcs.mmio_readq = chv_read64;
>> +
>> + } else {
>> + dev_priv->uncore.funcs.mmio_writeb = gen8_write8;
>> + dev_priv->uncore.funcs.mmio_writew = gen8_write16;
>> + dev_priv->uncore.funcs.mmio_writel = gen8_write32;
>> + dev_priv->uncore.funcs.mmio_writeq = gen8_write64;
>> + dev_priv->uncore.funcs.mmio_readb = gen6_read8;
>> + dev_priv->uncore.funcs.mmio_readw = gen6_read16;
>> + dev_priv->uncore.funcs.mmio_readl = gen6_read32;
>> + dev_priv->uncore.funcs.mmio_readq = gen6_read64;
>> + }
>> break;
>> case 7:
>> case 6:
>> --
>> 1.8.3.2
Thanks for the review. I will address the comments
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list