[Intel-gfx] [PATCH] drm/i915/chv: Enable HDMI Clock recovery for Pipe C

Thu Dec 4 11:08:20 PST 2014

On 12/04/2014 12:41 AM, Jani Nikula wrote:
> On Wed, 03 Dec 2014, Clint Taylor <clinton.a.taylor at intel.com> wrote:
>> On 12/03/2014 01:01 PM, Ville Syrjälä wrote:
>>> On Wed, Dec 03, 2014 at 10:10:30AM -0800, clinton.a.taylor at intel.com wrote:
>>>> From: Clint Taylor <clinton.a.taylor at intel.com>
>>>>
>>>> Added PIPE C register support for CHV audio programming.
>>>
>>> nak. The offset between the pipes looks constant so it should work
>>> just fine with _PIPE().
>>
>> Correct. Now I just need to figure out why AUD_CONFIG_C is cleared after
>> ChromeOS boot.
>
> "after boot" is a long time! ;)
>
> Do your logs show that ilk_audio_codec_disable (see intel_audio.c) gets
> called? With drm.debug=14 you should see "Disable audio codec on port
> %c, pipe %c\n".
>
> BR,
> Jani.
>

I've actually instrumented the driver with more logging and at 22.43 in 
the dmesg log the last call to audio_codec_enable() is called and is 
setting the Pixel_Clock bits of AUD_CONFIG_C to 0x9 which is correct for 
1080p60. Sometime after 22.436 and before the ChromeOS login screen 
appears the register is being cleared to 0x0 without knowledge/action of 
the i915 driver. Mode change and power state change seem to restore the 
programming correctly.

  Most likely candidate right now is an ordering issue with snd_hda 
during boot.

[    8.607022] [drm:intel_audio_codec_enable] ELD on 
[CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
[    8.607027] [drm:ilk_audio_codec_enable] Enable audio codec on port 
D, pipe C, 8 bytes ELD
[    8.607044]  *** CAT enable aud_config reg 0x001E2200 = 0x00090000
[   14.741047] [drm:ilk_audio_codec_disable] Disable audio codec on port 
D, pipe C
[   14.741055]  *** CAT disable aud_config reg 0x001E2200 = 0x10000000
[   15.773618] [drm:intel_audio_codec_enable] ELD on 
[CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
[   15.773624] [drm:ilk_audio_codec_enable] Enable audio codec on port 
D, pipe C, 8 bytes ELD
[   15.779315]  *** CAT enable aud_config reg 0x001E2200 = 0x00090000
[   19.936767] [drm:ilk_audio_codec_disable] Disable audio codec on port 
D, pipe C
[   19.936778]  *** CAT disable aud_config reg 0x001E2200 = 0x10000000
[   20.292920] [drm:intel_audio_codec_enable] ELD on 
[CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
[   20.292928] [drm:ilk_audio_codec_enable] Enable audio codec on port 
D, pipe C, 8 bytes ELD
[   20.298615]  *** CAT enable aud_config reg 0x001E2200 = 0x00090000
[   20.389110] [drm:ilk_audio_codec_disable] Disable audio codec on port 
D, pipe C
[   20.389121]  *** CAT disable aud_config reg 0x001E2200 = 0x10000000
[   22.430931] [drm:intel_audio_codec_enable] ELD on 
[CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
[   22.430940] [drm:ilk_audio_codec_enable] Enable audio codec on port 
D, pipe C, 8 bytes ELD
[   22.436627]  *** CAT enable aud_config reg 0x001E2200 = 0x00090000

>
>
>
>>
>> -Clint
>>
>>>
>>>>
>>>> Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
>>>> ---
>>>>    drivers/gpu/drm/i915/i915_reg.h |   18 ++++++++++++------
>>>>    1 file changed, 12 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>>>> index dc03fac..3d5813a 100644
>>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>>> @@ -6189,14 +6189,18 @@ enum punit_power_well {
>>>>
>>>>    #define _VLV_HDMIW_HDMIEDID_A		(VLV_DISPLAY_BASE + 0x62050)
>>>>    #define _VLV_HDMIW_HDMIEDID_B		(VLV_DISPLAY_BASE + 0x62150)
>>>> -#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
>>>> +#define _CHV_HDMIW_HDMIEDID_C		(VLV_DISPLAY_BASE + 0x62250)
>>>> +#define VLV_HDMIW_HDMIEDID(pipe) _PIPE3(pipe, \
>>>>    					_VLV_HDMIW_HDMIEDID_A, \
>>>> -					_VLV_HDMIW_HDMIEDID_B)
>>>> +					_VLV_HDMIW_HDMIEDID_B, \
>>>> +					_CHV_HDMIW_HDMIEDID_C)
>>>>    #define _VLV_AUD_CNTL_ST_A		(VLV_DISPLAY_BASE + 0x620B4)
>>>>    #define _VLV_AUD_CNTL_ST_B		(VLV_DISPLAY_BASE + 0x621B4)
>>>> -#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
>>>> +#define _CHV_AUD_CNTL_ST_C		(VLV_DISPLAY_BASE + 0x622B4)
>>>> +#define VLV_AUD_CNTL_ST(pipe) _PIPE3(pipe, \
>>>>    					_VLV_AUD_CNTL_ST_A, \
>>>> -					_VLV_AUD_CNTL_ST_B)
>>>> +					_VLV_AUD_CNTL_ST_B, \
>>>> +					_CHV_AUD_CNTL_ST_C)
>>>>    #define VLV_AUD_CNTL_ST2		(VLV_DISPLAY_BASE + 0x620C0)
>>>>
>>>>    /* These are the 4 32-bit write offset registers for each stream
>>>> @@ -6217,9 +6221,11 @@ enum punit_power_well {
>>>>    					_CPT_AUD_CONFIG_B)
>>>>    #define _VLV_AUD_CONFIG_A		(VLV_DISPLAY_BASE + 0x62000)
>>>>    #define _VLV_AUD_CONFIG_B		(VLV_DISPLAY_BASE + 0x62100)
>>>> -#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
>>>> +#define _CHV_AUD_CONFIG_C		(VLV_DISPLAY_BASE + 0x62200)
>>>> +#define VLV_AUD_CFG(pipe) _PIPE3(pipe, \
>>>>    					_VLV_AUD_CONFIG_A, \
>>>> -					_VLV_AUD_CONFIG_B)
>>>> +					_VLV_AUD_CONFIG_B, \
>>>> +					_CHV_AUD_CONFIG_C)
>>>>
>>>>    #define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
>>>>    #define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
>>>> --
>>>> 1.7.9.5
>>>>
>>>> _______________________________________________
>>>> Intel-gfx mailing list
>>>> Intel-gfx at lists.freedesktop.org
>>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>>
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>