[Intel-gfx] [PATCH 4/5] drm/i915: Move to atomic plane helpers (v8)

Matt Roper matthew.d.roper at intel.com
Mon Dec 15 16:23:20 PST 2014


Switch plane handling to use the atomic plane helpers.  This means that
rather than provide our own implementations of .update_plane() and
.disable_plane(), we expose the lower-level check/prepare/commit/cleanup
entrypoints and let the DRM core implement update/disable for us using
those entrypoints.

The other main change that falls out of this patch is that our
drm_plane's will now always have a valid plane->state that contains the
relevant plane state (initial state is allocated at plane creation).
The base drm_plane_state pointed to holds the requested source/dest
coordinates, and the subclassed intel_plane_state holds the adjusted
values that our driver actually uses.

v2:
 - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel)
 - Fix a copy/paste comment mistake (Bob)

v3:
 - Use prepare/cleanup functions that we've already factored out
 - Use newly refactored pre_commit/commit/post_commit to avoid sleeping
   during vblank evasion

v4:
 - Rebase to latest di-nightly requires adding an 'old_state' parameter
   to atomic_update;

v5:
 - Must have botched a rebase somewhere and lost some work.  Restore
   state 'dirty' flag to let begin/end code know which planes to
   run the pre_commit/post_commit hooks for.  This would have actually
   shown up as broken in the next commit rather than this one.

v6:
 - Squash kerneldoc patch into this one.
 - Previous patches have now already taken care of most of the
   infrastructure that used to be in this patch.  All we're adding here
   now is some thin wrappers.

v7:
 - Check return of intel_plane_duplicate_state() for allocation
   failures.

v8:
 - Drop unused drm_plane_state -> intel_plane_state cast.  (Ander)
 - Squash in actual transition to plane helpers.  Significant
   refactoring earlier in the patchset has made the combined
   prep+transition much easier to swallow than it was in earlier
   iterations. (Ander)

Testcase: igt/kms_plane
Testcase: igt/kms_universal_plane
Testcase: igt/kms_cursor_crc
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 Documentation/DocBook/drm.tmpl            |   5 +
 drivers/gpu/drm/i915/Makefile             |   1 +
 drivers/gpu/drm/i915/intel_atomic_plane.c | 150 ++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c      | 250 ++++++++++++------------------
 drivers/gpu/drm/i915/intel_drv.h          |  10 +-
 drivers/gpu/drm/i915/intel_sprite.c       |  50 ++++--
 6 files changed, 301 insertions(+), 165 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_atomic_plane.c

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 995dfb2..c033a0d 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3932,6 +3932,11 @@ int num_ioctls;</synopsis>
         </para>
       </sect2>
       <sect2>
+        <title>Atomic Plane Helpers</title>
+!Pdrivers/gpu/drm/i915/intel_atomic_plane.c atomic plane helpers
+!Idrivers/gpu/drm/i915/intel_atomic_plane.c
+      </sect2>
+      <sect2>
         <title>Output Probing</title>
         <para>
 	  This section covers output probing and related infrastructure like the
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 1849ffa..16e3dc3 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -66,6 +66,7 @@ i915-y += dvo_ch7017.o \
 	  dvo_ns2501.o \
 	  dvo_sil164.o \
 	  dvo_tfp410.o \
+	  intel_atomic_plane.o \
 	  intel_crt.o \
 	  intel_ddi.o \
 	  intel_dp.o \
diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
new file mode 100644
index 0000000..286fec8
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * DOC: atomic plane helper support
+ *
+ * The functions here are used by the atomic plane helper functions to
+ * implement legacy plane updates (i.e., drm_plane->update_plane() and
+ * drm_plane->disable_plane()).  This allows plane updates to use the
+ * atomic state infrastructure and perform plane updates as separate
+ * prepare/check/commit/cleanup steps.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include "intel_drv.h"
+
+/**
+ * intel_plane_duplicate_state - duplicate plane state
+ * @plane: drm plane
+ *
+ * Allocates and returns a copy of the plane state (both common and
+ * Intel-specific) for the specified plane.
+ *
+ * Returns: The newly allocated plane state, or NULL or failure.
+ */
+struct drm_plane_state *
+intel_plane_duplicate_state(struct drm_plane *plane)
+{
+	struct intel_plane_state *state;
+
+	if (plane->state)
+		state = kmemdup(plane->state, sizeof(*state), GFP_KERNEL);
+	else
+		state = kzalloc(sizeof(*state), GFP_KERNEL);
+
+	if (!state)
+		return NULL;
+
+	if (state->base.fb)
+		drm_framebuffer_reference(state->base.fb);
+
+	return &state->base;
+}
+
+/**
+ * intel_plane_destroy_state - destroy plane state
+ * @plane: drm plane
+ *
+ * Destroys the plane state (both common and Intel-specific) for the
+ * specified plane.
+ */
+void
+intel_plane_destroy_state(struct drm_plane *plane,
+			  struct drm_plane_state *state)
+{
+	drm_atomic_helper_plane_destroy_state(plane, state);
+}
+
+static int intel_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_plane_state *state)
+{
+	struct drm_crtc *crtc = state->crtc;
+	struct intel_crtc *intel_crtc;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct intel_plane_state *intel_state = to_intel_plane_state(state);
+
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
+	/*
+	 * The original src/dest coordinates are stored in state->base, but
+	 * we want to keep another copy internal to our driver that we can
+	 * clip/modify ourselves.
+	 */
+	intel_state->src.x1 = state->src_x;
+	intel_state->src.y1 = state->src_y;
+	intel_state->src.x2 = state->src_x + state->src_w;
+	intel_state->src.y2 = state->src_y + state->src_h;
+	intel_state->dst.x1 = state->crtc_x;
+	intel_state->dst.y1 = state->crtc_y;
+	intel_state->dst.x2 = state->crtc_x + state->crtc_w;
+	intel_state->dst.y2 = state->crtc_y + state->crtc_h;
+
+	/* Clip all planes to CRTC size, or 0x0 if CRTC is disabled */
+	intel_state->clip.x1 = 0;
+	intel_state->clip.y1 = 0;
+	intel_state->clip.x2 =
+		intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
+	intel_state->clip.y2 =
+		intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
+
+	/*
+	 * Disabling a plane is always okay; we just need to update
+	 * fb tracking in a special way since cleanup_fb() won't
+	 * get called by the plane helpers.
+	 */
+	if (state->fb == NULL && plane->state->fb != NULL) {
+		/*
+		 * 'prepare' is never called when plane is being disabled, so
+		 * we need to handle frontbuffer tracking as a special case
+		 */
+		intel_crtc->atomic.track_fbs |= (1 << drm_plane_index(plane));
+	}
+
+	return intel_plane->check_plane(plane, intel_state);
+}
+
+static void intel_plane_atomic_update(struct drm_plane *plane,
+				      struct drm_plane_state *old_state)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct intel_plane_state *intel_state =
+		to_intel_plane_state(plane->state);
+
+	/* Don't disable an already disabled plane */
+	if (!plane->state->fb && !old_state->fb)
+		return;
+
+	intel_plane->commit_plane(plane, intel_state);
+}
+
+const struct drm_plane_helper_funcs intel_plane_helper_funcs = {
+	.prepare_fb = intel_prepare_plane_fb,
+	.cleanup_fb = intel_cleanup_plane_fb,
+	.atomic_check = intel_plane_atomic_check,
+	.atomic_update = intel_plane_atomic_update,
+};
+
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 030cf93..934e6a8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -98,6 +98,8 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
 			    const struct intel_crtc_config *pipe_config);
 static void chv_prepare_pll(struct intel_crtc *crtc,
 			    const struct intel_crtc_config *pipe_config);
+static void intel_begin_crtc_commit(struct drm_crtc *crtc);
+static void intel_finish_crtc_commit(struct drm_crtc *crtc);
 
 static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
 {
@@ -9794,6 +9796,8 @@ out_hang:
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_set_base_atomic = intel_pipe_set_base_atomic,
 	.load_lut = intel_crtc_load_lut,
+	.atomic_begin = intel_begin_crtc_commit,
+	.atomic_flush = intel_finish_crtc_commit,
 };
 
 /**
@@ -11674,7 +11678,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
 	unsigned frontbuffer_bits = 0;
 	int ret = 0;
 
-	if (WARN_ON(fb == plane->fb || !obj))
+	if (!obj)
 		return 0;
 
 	switch (plane->type) {
@@ -11741,7 +11745,7 @@ intel_check_primary_plane(struct drm_plane *plane,
 	struct drm_device *dev = plane->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = state->base.crtc;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_crtc *intel_crtc;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_framebuffer *fb = state->base.fb;
 	struct drm_rect *dest = &state->dst;
@@ -11749,6 +11753,9 @@ intel_check_primary_plane(struct drm_plane *plane,
 	const struct drm_rect *clip = &state->clip;
 	int ret;
 
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
 	ret = drm_plane_helper_check_update(plane, crtc, fb,
 					    src, dest, clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
@@ -11808,23 +11815,26 @@ intel_commit_primary_plane(struct drm_plane *plane,
 	struct drm_framebuffer *fb = state->base.fb;
 	struct drm_device *dev = plane->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_crtc *intel_crtc;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_rect *src = &state->src;
 
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
 	plane->fb = fb;
 	crtc->x = src->x1 >> 16;
 	crtc->y = src->y1 >> 16;
 
-	intel_plane->crtc_x = state->orig_dst.x1;
-	intel_plane->crtc_y = state->orig_dst.y1;
-	intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
-	intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
-	intel_plane->src_x = state->orig_src.x1;
-	intel_plane->src_y = state->orig_src.y1;
-	intel_plane->src_w = drm_rect_width(&state->orig_src);
-	intel_plane->src_h = drm_rect_height(&state->orig_src);
+	intel_plane->crtc_x = state->base.crtc_x;
+	intel_plane->crtc_y = state->base.crtc_y;
+	intel_plane->crtc_w = state->base.crtc_w;
+	intel_plane->crtc_h = state->base.crtc_h;
+	intel_plane->src_x = state->base.src_x;
+	intel_plane->src_y = state->base.src_y;
+	intel_plane->src_w = state->base.src_w;
+	intel_plane->src_h = state->base.src_h;
 	intel_plane->obj = obj;
 
 	if (intel_crtc->active) {
@@ -11853,6 +11863,32 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_plane *intel_plane;
+	struct drm_plane *p;
+	unsigned fb_bits = 0;
+
+	/* Track fb's for any planes being disabled */
+	list_for_each_entry(p, &dev->mode_config.plane_list, head) {
+		intel_plane = to_intel_plane(p);
+
+		if (intel_crtc->atomic.track_fbs & (1 << drm_plane_index(p))) {
+			switch (p->type) {
+			case DRM_PLANE_TYPE_PRIMARY:
+				fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
+				break;
+			case DRM_PLANE_TYPE_CURSOR:
+				fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
+				break;
+			case DRM_PLANE_TYPE_OVERLAY:
+				fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
+				break;
+			}
+
+			mutex_lock(&dev->struct_mutex);
+			i915_gem_track_fb(intel_fb_obj(p->fb), NULL, fb_bits);
+			mutex_unlock(&dev->struct_mutex);
+		}
+	}
 
 	if (intel_crtc->atomic.disable_fbc)
 		intel_fbc_disable(dev);
@@ -11902,124 +11938,23 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc)
 	memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic));
 }
 
-int
-intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
-		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-		   unsigned int crtc_w, unsigned int crtc_h,
-		   uint32_t src_x, uint32_t src_y,
-		   uint32_t src_w, uint32_t src_h)
-{
-	struct drm_device *dev = plane->dev;
-	struct drm_framebuffer *old_fb = plane->fb;
-	struct intel_plane_state state = {{ 0 }};
-	struct intel_plane *intel_plane = to_intel_plane(plane);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int ret;
-
-	state.base.crtc = crtc ? crtc : plane->crtc;
-	state.base.fb = fb;
-
-	/* sample coordinates in 16.16 fixed point */
-	state.src.x1 = src_x;
-	state.src.x2 = src_x + src_w;
-	state.src.y1 = src_y;
-	state.src.y2 = src_y + src_h;
-
-	/* integer pixels */
-	state.dst.x1 = crtc_x;
-	state.dst.x2 = crtc_x + crtc_w;
-	state.dst.y1 = crtc_y;
-	state.dst.y2 = crtc_y + crtc_h;
-
-	state.clip.x1 = 0;
-	state.clip.y1 = 0;
-	state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
-	state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
-
-	state.orig_src = state.src;
-	state.orig_dst = state.dst;
-
-	ret = intel_plane->check_plane(plane, &state);
-	if (ret)
-		return ret;
-
-	if (fb != old_fb && fb) {
-		ret = intel_prepare_plane_fb(plane, fb);
-		if (ret)
-			return ret;
-	}
-
-	if (!state.base.fb) {
-		unsigned fb_bits = 0;
-
-		switch (plane->type) {
-		case DRM_PLANE_TYPE_PRIMARY:
-			fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
-			break;
-		case DRM_PLANE_TYPE_CURSOR:
-			fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
-			break;
-		case DRM_PLANE_TYPE_OVERLAY:
-			fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
-			break;
-		}
-
-		/*
-		 * 'prepare' is never called when plane is being disabled, so
-		 * we need to handle frontbuffer tracking here
-		 */
-		mutex_lock(&dev->struct_mutex);
-		i915_gem_track_fb(intel_fb_obj(plane->fb), NULL, fb_bits);
-		mutex_unlock(&dev->struct_mutex);
-	}
-
-	intel_begin_crtc_commit(crtc);
-	intel_plane->commit_plane(plane, &state);
-	intel_finish_crtc_commit(crtc);
-
-	if (fb != old_fb && old_fb) {
-		if (intel_crtc->active)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-		intel_cleanup_plane_fb(plane, old_fb);
-	}
-
-	plane->fb = fb;
-
-	return 0;
-}
-
-/**
- * intel_disable_plane - disable a plane
- * @plane: plane to disable
- *
- * General disable handler for all plane types.
- */
-int
-intel_disable_plane(struct drm_plane *plane)
-{
-	if (!plane->fb)
-		return 0;
-
-	if (WARN_ON(!plane->crtc))
-		return -EINVAL;
-
-	return plane->funcs->update_plane(plane, plane->crtc, NULL,
-					  0, 0, 0, 0, 0, 0, 0, 0);
-}
-
 /* Common destruction function for both primary and cursor planes */
 void intel_plane_destroy(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
+	intel_plane_destroy_state(plane, plane->state);
 	drm_plane_cleanup(plane);
 	kfree(intel_plane);
 }
 
 static const struct drm_plane_funcs intel_primary_plane_funcs = {
-	.update_plane = intel_update_plane,
-	.disable_plane = intel_disable_plane,
+	.update_plane = drm_plane_helper_update,
+	.disable_plane = drm_plane_helper_disable,
 	.destroy = intel_plane_destroy,
-	.set_property = intel_plane_set_property
+	.set_property = intel_plane_set_property,
+	.atomic_duplicate_state = intel_plane_duplicate_state,
+	.atomic_destroy_state = intel_plane_destroy_state,
+
 };
 
 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
@@ -12033,6 +11968,12 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 	if (primary == NULL)
 		return NULL;
 
+	primary->base.state = intel_plane_duplicate_state(&primary->base);
+	if (primary->base.state == NULL) {
+		kfree(primary);
+		return NULL;
+	}
+
 	primary->can_scale = false;
 	primary->max_downscale = 1;
 	primary->pipe = pipe;
@@ -12068,6 +12009,8 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 				primary->rotation);
 	}
 
+	drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
+
 	return &primary->base;
 }
 
@@ -12076,17 +12019,19 @@ intel_check_cursor_plane(struct drm_plane *plane,
 			 struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->base.crtc;
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = plane->dev;
 	struct drm_framebuffer *fb = state->base.fb;
 	struct drm_rect *dest = &state->dst;
 	struct drm_rect *src = &state->src;
 	const struct drm_rect *clip = &state->clip;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int crtc_w, crtc_h;
+	struct intel_crtc *intel_crtc;
 	unsigned stride;
 	int ret;
 
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
 	ret = drm_plane_helper_check_update(plane, crtc, fb,
 					    src, dest, clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
@@ -12101,15 +12046,14 @@ intel_check_cursor_plane(struct drm_plane *plane,
 		goto finish;
 
 	/* Check for which cursor types we support */
-	crtc_w = drm_rect_width(&state->orig_dst);
-	crtc_h = drm_rect_height(&state->orig_dst);
-	if (!cursor_size_ok(dev, crtc_w, crtc_h)) {
-		DRM_DEBUG("Cursor dimension not supported\n");
+	if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) {
+		DRM_DEBUG("Cursor dimension %dx%d not supported\n",
+			  state->base.crtc_w, state->base.crtc_h);
 		return -EINVAL;
 	}
 
-	stride = roundup_pow_of_two(crtc_w) * 4;
-	if (obj->base.size < stride * crtc_h) {
+	stride = roundup_pow_of_two(state->base.crtc_w) * 4;
+	if (obj->base.size < stride * state->base.crtc_h) {
 		DRM_DEBUG_KMS("buffer is too small\n");
 		return -ENOMEM;
 	}
@@ -12127,8 +12071,7 @@ intel_check_cursor_plane(struct drm_plane *plane,
 
 finish:
 	if (intel_crtc->active) {
-		if (intel_crtc->cursor_width !=
-		    drm_rect_width(&state->orig_dst))
+		if (intel_crtc->cursor_width != state->base.crtc_w)
 			intel_crtc->atomic.update_wm = true;
 
 		intel_crtc->atomic.fb_bits |=
@@ -12143,24 +12086,27 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 			  struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->base.crtc;
-	struct drm_device *dev = crtc->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = plane->dev;
+	struct intel_crtc *intel_crtc;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
 	uint32_t addr;
 
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
 	plane->fb = state->base.fb;
-	crtc->cursor_x = state->orig_dst.x1;
-	crtc->cursor_y = state->orig_dst.y1;
-
-	intel_plane->crtc_x = state->orig_dst.x1;
-	intel_plane->crtc_y = state->orig_dst.y1;
-	intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
-	intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
-	intel_plane->src_x = state->orig_src.x1;
-	intel_plane->src_y = state->orig_src.y1;
-	intel_plane->src_w = drm_rect_width(&state->orig_src);
-	intel_plane->src_h = drm_rect_height(&state->orig_src);
+	crtc->cursor_x = state->base.crtc_x;
+	crtc->cursor_y = state->base.crtc_y;
+
+	intel_plane->crtc_x = state->base.crtc_x;
+	intel_plane->crtc_y = state->base.crtc_y;
+	intel_plane->crtc_w = state->base.crtc_w;
+	intel_plane->crtc_h = state->base.crtc_h;
+	intel_plane->src_x = state->base.src_x;
+	intel_plane->src_y = state->base.src_y;
+	intel_plane->src_w = state->base.src_w;
+	intel_plane->src_h = state->base.src_h;
 	intel_plane->obj = obj;
 
 	if (intel_crtc->cursor_bo == obj)
@@ -12176,18 +12122,20 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = obj;
 update:
-	intel_crtc->cursor_width = drm_rect_width(&state->orig_dst);
-	intel_crtc->cursor_height = drm_rect_height(&state->orig_dst);
+	intel_crtc->cursor_width = state->base.crtc_w;
+	intel_crtc->cursor_height = state->base.crtc_h;
 
 	if (intel_crtc->active)
 		intel_crtc_update_cursor(crtc, state->visible);
 }
 
 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
-	.update_plane = intel_update_plane,
-	.disable_plane = intel_disable_plane,
+	.update_plane = drm_plane_helper_update,
+	.disable_plane = drm_plane_helper_disable,
 	.destroy = intel_plane_destroy,
 	.set_property = intel_plane_set_property,
+	.atomic_duplicate_state = intel_plane_duplicate_state,
+	.atomic_destroy_state = intel_plane_destroy_state,
 };
 
 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
@@ -12199,6 +12147,12 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
 	if (cursor == NULL)
 		return NULL;
 
+	cursor->base.state = intel_plane_duplicate_state(&cursor->base);
+	if (cursor->base.state == NULL) {
+		kfree(cursor);
+		return NULL;
+	}
+
 	cursor->can_scale = false;
 	cursor->max_downscale = 1;
 	cursor->pipe = pipe;
@@ -12225,6 +12179,8 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
 				cursor->rotation);
 	}
 
+	drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
+
 	return &cursor->base;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2523315..ab23190 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -248,8 +248,6 @@ struct intel_plane_state {
 	struct drm_rect src;
 	struct drm_rect dst;
 	struct drm_rect clip;
-	struct drm_rect orig_src;
-	struct drm_rect orig_dst;
 	bool visible;
 
 	/*
@@ -437,6 +435,7 @@ struct intel_crtc_atomic_commit {
 	bool disable_fbc;
 	bool pre_disable_primary;
 	bool update_wm;
+	unsigned track_fbs;
 
 	/* Sleepable operations to perform after commit */
 	unsigned fb_bits;
@@ -575,6 +574,7 @@ struct cxsr_latency {
 #define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
 #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
 #define to_intel_plane(x) container_of(x, struct intel_plane, base)
+#define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
 #define intel_fb_obj(x) (x ? to_intel_framebuffer(x)->obj : NULL)
 
 struct intel_hdmi {
@@ -1253,4 +1253,10 @@ void intel_pre_disable_primary(struct drm_crtc *crtc);
 /* intel_tv.c */
 void intel_tv_init(struct drm_device *dev);
 
+/* intel_atomic.c */
+struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);
+void intel_plane_destroy_state(struct drm_plane *plane,
+			       struct drm_plane_state *state);
+extern const struct drm_plane_helper_funcs intel_plane_helper_funcs;
+
 #endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index a689c73..f8efcfd 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -33,6 +33,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_rect.h>
+#include <drm/drm_plane_helper.h>
 #include "intel_drv.h"
 #include <drm/i915_drm.h>
 #include "i915_drv.h"
@@ -1061,12 +1062,13 @@ intel_check_sprite_plane(struct drm_plane *plane,
 	uint32_t src_x, src_y, src_w, src_h;
 	struct drm_rect *src = &state->src;
 	struct drm_rect *dst = &state->dst;
-	struct drm_rect *orig_src = &state->orig_src;
 	const struct drm_rect *clip = &state->clip;
 	int hscale, vscale;
 	int max_scale, min_scale;
 	int pixel_size;
 
+	intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
+
 	if (!fb) {
 		state->visible = false;
 		goto finish;
@@ -1147,10 +1149,10 @@ intel_check_sprite_plane(struct drm_plane *plane,
 				    intel_plane->rotation);
 
 		/* sanity check to make sure the src viewport wasn't enlarged */
-		WARN_ON(src->x1 < (int) orig_src->x1 ||
-			src->y1 < (int) orig_src->y1 ||
-			src->x2 > (int) orig_src->x2 ||
-			src->y2 > (int) orig_src->y2);
+		WARN_ON(src->x1 < (int) state->base.src_x ||
+			src->y1 < (int) state->base.src_y ||
+			src->x2 > (int) state->base.src_x + state->base.src_w ||
+			src->y2 > (int) state->base.src_y + state->base.src_h);
 
 		/*
 		 * Hardware doesn't handle subpixel coordinates.
@@ -1247,7 +1249,7 @@ intel_commit_sprite_plane(struct drm_plane *plane,
 			  struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->base.crtc;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_crtc *intel_crtc;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_framebuffer *fb = state->base.fb;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
@@ -1255,14 +1257,19 @@ intel_commit_sprite_plane(struct drm_plane *plane,
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y, src_w, src_h;
 
-	intel_plane->crtc_x = state->orig_dst.x1;
-	intel_plane->crtc_y = state->orig_dst.y1;
-	intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
-	intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
-	intel_plane->src_x = state->orig_src.x1;
-	intel_plane->src_y = state->orig_src.y1;
-	intel_plane->src_w = drm_rect_width(&state->orig_src);
-	intel_plane->src_h = drm_rect_height(&state->orig_src);
+	intel_plane->crtc_x = state->base.crtc_x;
+	intel_plane->crtc_y = state->base.crtc_y;
+	intel_plane->crtc_w = state->base.crtc_w;
+	intel_plane->crtc_h = state->base.crtc_h;
+	intel_plane->src_x = state->base.src_x;
+	intel_plane->src_y = state->base.src_y;
+	intel_plane->src_w = state->base.src_w;
+	intel_plane->src_h = state->base.src_h;
+
+	crtc = crtc ? crtc : plane->crtc;
+	intel_crtc = to_intel_crtc(crtc);
+
+	plane->fb = state->base.fb;
 	intel_plane->obj = obj;
 
 	if (intel_crtc->active) {
@@ -1386,10 +1393,12 @@ int intel_plane_restore(struct drm_plane *plane)
 }
 
 static const struct drm_plane_funcs intel_sprite_plane_funcs = {
-	.update_plane = intel_update_plane,
-	.disable_plane = intel_disable_plane,
+	.update_plane = drm_plane_helper_update,
+	.disable_plane = drm_plane_helper_disable,
 	.destroy = intel_plane_destroy,
 	.set_property = intel_plane_set_property,
+	.atomic_duplicate_state = intel_plane_duplicate_state,
+	.atomic_destroy_state = intel_plane_destroy_state,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1451,6 +1460,13 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 	if (!intel_plane)
 		return -ENOMEM;
 
+	intel_plane->base.state =
+		intel_plane_duplicate_state(&intel_plane->base);
+	if (intel_plane->base.state == NULL) {
+		kfree(intel_plane);
+		return -ENOMEM;
+	}
+
 	switch (INTEL_INFO(dev)->gen) {
 	case 5:
 	case 6:
@@ -1544,6 +1560,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 					   dev->mode_config.rotation_property,
 					   intel_plane->rotation);
 
+	drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
+
  out:
 	return ret;
 }
-- 
1.8.5.1



More information about the Intel-gfx mailing list