[Intel-gfx] [PATCH 08/19] drm/i915: get port power domain in connector detect

[Jesse Barnes]

On Wed, 19 Feb 2014 14:39:58 +0200
Imre Deak <imre.deak at intel.com> wrote:

> On Wed, 2014-02-19 at 14:35 +0200, Ville Syrjälä wrote:
> > On Tue, Feb 18, 2014 at 12:02:09AM +0200, Imre Deak wrote:
> > > The connector detect and get_mode handlers need to access the port
> > > specific HW blocks to read the EDID etc. Get/put the port power domains
> > > around these handlers.
> > > 
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
> > >  drivers/gpu/drm/i915/intel_dp.c  | 16 ++++++++++++---
> > >  drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
> > 
> > And what about HDMI?
> 
> Good catch, I missed that one.

I wonder if we can catch bits like that using our display reg base
bits.  We could have a platform specific power check for each block to
do some basic sanity checking on whether the appropriate well was
enabled and squak if not.

I just know we'll miss this more than once, and I'm not sure if the
unclaimed reg stuff will save us on all platforms.

-- 
Jesse Barnes, Intel Open Source Technology Center