[Intel-gfx] [PATCH] drm/i915: use backlight legacy combination mode also for i915gm/i945gm

[Jani Nikula]

i915gm and i945gm also seem to use and need the legacy combination mode
bit in BLC_PWM_CTL.

v2: Also do this for i915gm (Ville).

Reported-and-tested-by: Luis Ortega <luiorpe1 at gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75001
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_panel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 5bc3f6ea1014..cb058408c70e 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -689,7 +689,7 @@ static void i9xx_enable_backlight(struct intel_connector *connector)
 		freq /= 0xff;
 
 	ctl = freq << 17;
-	if (IS_GEN2(dev) && panel->backlight.combination_mode)
+	if (panel->backlight.combination_mode)
 		ctl |= BLM_LEGACY_MODE;
 	if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
 		ctl |= BLM_POLARITY_PNV;
@@ -970,7 +970,7 @@ static int i9xx_setup_backlight(struct intel_connector *connector)
 
 	ctl = I915_READ(BLC_PWM_CTL);
 
-	if (IS_GEN2(dev))
+	if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev))
 		panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE;
 
 	if (IS_PINEVIEW(dev))
-- 
1.7.9.5