[Intel-gfx] [PATCH 19/19] drm/i915: power domains: add vlv power wells

[Imre Deak]

On Thu, 2014-02-20 at 11:58 -0800, Jesse Barnes wrote:
> On Wed, 19 Feb 2014 14:29:44 +0200
> Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> 
> > On Tue, Feb 18, 2014 at 12:02:20AM +0200, Imre Deak wrote:
> > > Based on an early draft from Jesse.
> > > 
> > > Add support for powering on/off the dynamic power wells on VLV by
> > > registering its display and dpio dynamic power wells with the power
> > > domain framework.
> > > 
> > > For now power on all PHY TX lanes regardless of the actual lane
> > > configuration. Later this can be optimized when the PHY side setup
> > > enables only the required lanes. Atm, it enables all lanes in all
> > > cases.
> > > 
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_dma.c      |   1 -
> > >  drivers/gpu/drm/i915/i915_drv.h      |   2 +-
> > >  drivers/gpu/drm/i915/intel_display.c |   1 +
> > >  drivers/gpu/drm/i915/intel_pm.c      | 228 +++++++++++++++++++++++++++++++++++
> > >  4 files changed, 230 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> > > index dca4dc3..f8f7a59 100644
> > > --- a/drivers/gpu/drm/i915/i915_dma.c
> > > +++ b/drivers/gpu/drm/i915/i915_dma.c
> > > @@ -1668,7 +1668,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> > >  		goto out_mtrrfree;
> > >  	}
> > >  
> > > -	dev_priv->display_irqs_enabled = true;
> > >  	intel_irq_init(dev);
> > >  	intel_uncore_sanitize(dev);
> > >  
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > index 227c349..804334e 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -1053,7 +1053,7 @@ struct i915_power_well {
> > >  	/* power well enable/disable usage count */
> > >  	int count;
> > >  	unsigned long domains;
> > > -	void *data;
> > > +	unsigned long data;
> > >  	const struct i915_power_well_ops *ops;
> > >  };
> > >  
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > index ea00878..d6661c4 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -4224,6 +4224,7 @@ static void valleyview_modeset_global_resources(struct drm_device *dev)
> > >  
> > >  	if (req_cdclk != cur_cdclk)
> > >  		valleyview_set_cdclk(dev, req_cdclk);
> > > +	modeset_update_power_wells(dev);
> > >  }
> > >  
> > >  static void valleyview_crtc_enable(struct drm_crtc *crtc)
> > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > > index 68f58e5..e4416a7 100644
> > > --- a/drivers/gpu/drm/i915/intel_pm.c
> > > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > > @@ -5344,6 +5344,133 @@ static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
> > >  	hsw_enable_package_c8(dev_priv);
> > >  }
> > >  
> > > +static void vlv_set_power_well(struct drm_i915_private *dev_priv,
> > > +			       struct i915_power_well *power_well, bool enable)
> > > +{
> > > +	enum punit_power_well power_well_id = power_well->data;
> > > +	u32 mask;
> > > +	u32 state;
> > > +	u32 ctrl;
> > > +
> > > +	mask = PUNIT_PWRGT_MASK(power_well_id);
> > > +	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
> > > +			 PUNIT_PWRGT_PWR_GATE(power_well_id);
> > > +
> > > +	mutex_lock(&dev_priv->rps.hw_lock);
> > > +
> > > +#define COND \
> > > +	((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
> > > +
> > > +	if (COND)
> > > +		goto out;
> > > +
> > > +	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
> > > +	ctrl &= ~mask;
> > > +	ctrl |= state;
> > > +	vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
> > > +
> > > +	if (wait_for(COND, 100))
> > > +		DRM_ERROR("timout setting power well state %08x (%08x)\n",
> > > +			  state,
> > > +			  vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
> > 
> > #undef COND somewhere to avoid suprises further down in the code?
> > 
> > > +
> > > +out:
> > > +	mutex_unlock(&dev_priv->rps.hw_lock);
> > > +}
> > > +
> > <snip>
> > 
> 
> I'd like to see the code for re-enabling the display state land
> eventually too, so we can get savings when userspace uses DPMS instead
> of NULL mode sets for things.  But to do that nicely requires some more
> work in the mode set code to pull out more PLL bits (also needed for
> atomic mode setting).

I guess you meant here the drm connector->funcs->dpms() callback, that's
called when setting the connector's dpms property. But I'm not sure what
you meant by re-enabling the display state.

I was thinking that we need to get/put the power domains around setting
DPMS off/on via the above property, but we actually don't need that.
Internally the dpms callback just calls the
display.disable_crtc/enable_crtc() which will disable/enable the pipes
but won't do anything with the power domains (which is only updated
during a normal modeset through display.modeset_global_resources().

This isn't optimal power-wise, but it's a separate issue. I think Daniel
had the idea of converting the dpms callback to be a proper NULL
modeset. In that case too the power domains will be get/put correctly.

--Imre

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20140226/3f7efa0d/attachment.sig>