[Intel-gfx] [PATCH 4/7] drm/i915: populate mem_freq/cz_clock for chv

[Mika Kuoppala]

deepak.s at linux.intel.com writes:

> From: Deepak S <deepak.s at linux.intel.com>
>
> We need mem_freq or cz clock for freq/opcode conversion
>
> Signed-off-by: Deepak S <deepak.s at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h |  1 +
>  drivers/gpu/drm/i915/i915_reg.h |  6 ++++++
>  drivers/gpu/drm/i915/intel_pm.c | 29 +++++++++++++++++++++++++++++
>  3 files changed, 36 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index bce4654..568b39c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -932,6 +932,7 @@ struct intel_gen6_power_mgmt {
>  	u8 efficient_freq;	/* AKA RPe. Pre-determined balanced frequency */
>  	u8 rp1_freq;		/* "less than" RP0 power/freqency */
>  	u8 rp0_freq;		/* Non-overclocked max frequency. */
> +	u32 cz_freq;
>  
>  	u32 ei_interrupt_count;
>  
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 490f031..e533efa 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5541,6 +5541,12 @@ enum punit_power_well {
>  						 GEN6_PM_RP_DOWN_THRESHOLD | \
>  						 GEN6_PM_RP_DOWN_TIMEOUT)
>  
> +#define CHV_CZ_CLOCK_FREQ_MODE_200			200
> +#define CHV_CZ_CLOCK_FREQ_MODE_267			267
> +#define CHV_CZ_CLOCK_FREQ_MODE_320			320
> +#define CHV_CZ_CLOCK_FREQ_MODE_333			333
> +#define CHV_CZ_CLOCK_FREQ_MODE_400			400
> +

No need to define these in my opinion as it is 1:1. Just use
the numbers straight.


>  #define GEN7_GT_SCRATCH_BASE			0x4F100
>  #define GEN7_GT_SCRATCH_REG_NUM			8
>  
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 9dfebab..6c19ce5 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5706,6 +5706,35 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
>  static void cherryview_init_clock_gating(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 val;
> +
> +	mutex_lock(&dev_priv->rps.hw_lock);
> +	val = vlv_punit_read(dev_priv, CCK_FUSE_REG);

s/punit/cck (?)

With the changes mentioned above:
Reviewed-by: Mika Kuoppala <mika.kuoppala at intel.com>

> +	mutex_unlock(&dev_priv->rps.hw_lock);
> +	switch ((val >> 2) & 0x7) {
> +	case 0:
> +	case 1:
> +			dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_200;
> +			dev_priv->mem_freq = 1600;
> +			break;
> +	case 2:
> +			dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_267;
> +			dev_priv->mem_freq = 1600;
> +			break;
> +	case 3:
> +			dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_333;
> +			dev_priv->mem_freq = 2000;
> +			break;
> +	case 4:
> +			dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_320;
> +			dev_priv->mem_freq = 1600;
> +			break;
> +	case 5:
> +			dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_400;
> +			dev_priv->mem_freq = 1600;
> +			break;
> +	}
> +	DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
>  
>  	I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
>  
> -- 
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx