[Intel-gfx] [PATCH v2] drm/i915: Always apply cursor width changes
Daniel Vetter
daniel at ffwll.ch
Mon Jun 2 17:34:46 CEST 2014
On Mon, Jun 02, 2014 at 01:46:11PM +0300, Antti Koskipää wrote:
> On 06/02/2014 11:49 AM, Daniel Vetter wrote:
> > On Fri, May 30, 2014 at 04:35:26PM +0300, Chris Wilson wrote:
> >> It is possible for userspace to create a big object large enough for a
> >> 256x256, and then switch over to using it as a 64x64 cursor. This
> >> requires the cursor update routines to check for a change in width on
> >> every update, rather than just when the cursor is originally enabled.
> >>
> >> This also fixes an issue with 845g/865g which cannot change the base
> >> address of the cursor whilst it is active.
> >>
> >> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> >> [Antti:rebased, adjusted macro names and moved some lines, no functional
> >> changes]
> >> Reviewed-by: Antti Koskipaa <antti.koskipaa at linux.intel.com>
> >> Tested-by: Antti Koskipaa <antti.koskipaa at linux.intel.com>
> >
> > Still missing the igt testcase. Is Antti still working on that one?
>
> The testcase was just posted. It just needed some cleanup.
Cool. Patch is queued for -next, thanks for the patch.
-Daniel
>
> > And I
> > guess now we also need an Cc: stable at vger.kernel.org on this one here.
> > -Daniel
> >
> >> ---
> >> drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
> >> drivers/gpu/drm/i915/intel_display.c | 106 +++++++++++++++++------------------
> >> drivers/gpu/drm/i915/intel_drv.h | 3 +-
> >> 3 files changed, 53 insertions(+), 58 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> >> index 2e5f76a..04d0b7c 100644
> >> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> >> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> >> @@ -2353,7 +2353,7 @@ static int i915_display_info(struct seq_file *m, void *unused)
> >>
> >> active = cursor_position(dev, crtc->pipe, &x, &y);
> >> seq_printf(m, "\tcursor visible? %s, position (%d, %d), addr 0x%08x, active? %s\n",
> >> - yesno(crtc->cursor_visible),
> >> + yesno(crtc->cursor_base),
> >> x, y, crtc->cursor_addr,
> >> yesno(active));
> >> }
> >> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> >> index 731cd01..955f92d 100644
> >> --- a/drivers/gpu/drm/i915/intel_display.c
> >> +++ b/drivers/gpu/drm/i915/intel_display.c
> >> @@ -7872,29 +7872,33 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
> >> struct drm_device *dev = crtc->dev;
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >> - bool visible = base != 0;
> >> - u32 cntl;
> >> + uint32_t cntl;
> >>
> >> - if (intel_crtc->cursor_visible == visible)
> >> - return;
> >> -
> >> - cntl = I915_READ(_CURACNTR);
> >> - if (visible) {
> >> + if (base != intel_crtc->cursor_base) {
> >> /* On these chipsets we can only modify the base whilst
> >> * the cursor is disabled.
> >> */
> >> + if (intel_crtc->cursor_cntl) {
> >> + I915_WRITE(_CURACNTR, 0);
> >> + POSTING_READ(_CURACNTR);
> >> + intel_crtc->cursor_cntl = 0;
> >> + }
> >> +
> >> I915_WRITE(_CURABASE, base);
> >> + POSTING_READ(_CURABASE);
> >> + }
> >>
> >> - cntl &= ~(CURSOR_FORMAT_MASK);
> >> - /* XXX width must be 64, stride 256 => 0x00 << 28 */
> >> - cntl |= CURSOR_ENABLE |
> >> + /* XXX width must be 64, stride 256 => 0x00 << 28 */
> >> + cntl = 0;
> >> + if (base)
> >> + cntl = (CURSOR_ENABLE |
> >> CURSOR_GAMMA_ENABLE |
> >> - CURSOR_FORMAT_ARGB;
> >> - } else
> >> - cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
> >> - I915_WRITE(_CURACNTR, cntl);
> >> -
> >> - intel_crtc->cursor_visible = visible;
> >> + CURSOR_FORMAT_ARGB);
> >> + if (intel_crtc->cursor_cntl != cntl) {
> >> + I915_WRITE(_CURACNTR, cntl);
> >> + POSTING_READ(_CURACNTR);
> >> + intel_crtc->cursor_cntl = cntl;
> >> + }
> >> }
> >>
> >> static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
> >> @@ -7903,16 +7907,12 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >> int pipe = intel_crtc->pipe;
> >> - bool visible = base != 0;
> >> -
> >> - if (intel_crtc->cursor_visible != visible) {
> >> - int16_t width = intel_crtc->cursor_width;
> >> - uint32_t cntl = I915_READ(CURCNTR(pipe));
> >> - if (base) {
> >> - cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
> >> - cntl |= MCURSOR_GAMMA_ENABLE;
> >> + uint32_t cntl;
> >>
> >> - switch (width) {
> >> + cntl = 0;
> >> + if (base) {
> >> + cntl = MCURSOR_GAMMA_ENABLE;
> >> + switch (intel_crtc->cursor_width) {
> >> case 64:
> >> cntl |= CURSOR_MODE_64_ARGB_AX;
> >> break;
> >> @@ -7925,18 +7925,16 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
> >> default:
> >> WARN_ON(1);
> >> return;
> >> - }
> >> - cntl |= pipe << 28; /* Connect to correct pipe */
> >> - } else {
> >> - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
> >> - cntl |= CURSOR_MODE_DISABLE;
> >> }
> >> + cntl |= pipe << 28; /* Connect to correct pipe */
> >> + }
> >> + if (intel_crtc->cursor_cntl != cntl) {
> >> I915_WRITE(CURCNTR(pipe), cntl);
> >> -
> >> - intel_crtc->cursor_visible = visible;
> >> + POSTING_READ(CURCNTR(pipe));
> >> + intel_crtc->cursor_cntl = cntl;
> >> }
> >> +
> >> /* and commit changes on next vblank */
> >> - POSTING_READ(CURCNTR(pipe));
> >> I915_WRITE(CURBASE(pipe), base);
> >> POSTING_READ(CURBASE(pipe));
> >> }
> >> @@ -7947,15 +7945,12 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >> int pipe = intel_crtc->pipe;
> >> - bool visible = base != 0;
> >> -
> >> - if (intel_crtc->cursor_visible != visible) {
> >> - int16_t width = intel_crtc->cursor_width;
> >> - uint32_t cntl = I915_READ(CURCNTR(pipe));
> >> - if (base) {
> >> - cntl &= ~CURSOR_MODE;
> >> - cntl |= MCURSOR_GAMMA_ENABLE;
> >> - switch (width) {
> >> + uint32_t cntl;
> >> +
> >> + cntl = 0;
> >> + if (base) {
> >> + cntl = MCURSOR_GAMMA_ENABLE;
> >> + switch (intel_crtc->cursor_width) {
> >> case 64:
> >> cntl |= CURSOR_MODE_64_ARGB_AX;
> >> break;
> >> @@ -7968,21 +7963,18 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
> >> default:
> >> WARN_ON(1);
> >> return;
> >> - }
> >> - } else {
> >> - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
> >> - cntl |= CURSOR_MODE_DISABLE;
> >> - }
> >> - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
> >> - cntl |= CURSOR_PIPE_CSC_ENABLE;
> >> - cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
> >> }
> >> - I915_WRITE(CURCNTR(pipe), cntl);
> >> + }
> >> + if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> >> + cntl |= CURSOR_PIPE_CSC_ENABLE;
> >>
> >> - intel_crtc->cursor_visible = visible;
> >> + if (intel_crtc->cursor_cntl != cntl) {
> >> + I915_WRITE(CURCNTR(pipe), cntl);
> >> + POSTING_READ(CURCNTR(pipe));
> >> + intel_crtc->cursor_cntl = cntl;
> >> }
> >> +
> >> /* and commit changes on next vblank */
> >> - POSTING_READ(CURCNTR(pipe));
> >> I915_WRITE(CURBASE(pipe), base);
> >> POSTING_READ(CURBASE(pipe));
> >> }
> >> @@ -7998,7 +7990,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
> >> int x = intel_crtc->cursor_x;
> >> int y = intel_crtc->cursor_y;
> >> u32 base = 0, pos = 0;
> >> - bool visible;
> >>
> >> if (on)
> >> base = intel_crtc->cursor_addr;
> >> @@ -8027,8 +8018,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
> >> }
> >> pos |= y << CURSOR_Y_SHIFT;
> >>
> >> - visible = base != 0;
> >> - if (!visible && !intel_crtc->cursor_visible)
> >> + if (base == 0 && intel_crtc->cursor_base == 0)
> >> return;
> >>
> >> I915_WRITE(CURPOS(pipe), pos);
> >> @@ -8039,6 +8029,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
> >> i845_update_cursor(crtc, base);
> >> else
> >> i9xx_update_cursor(crtc, base);
> >> + intel_crtc->cursor_base = base;
> >> }
> >>
> >> static int intel_crtc_cursor_set(struct drm_crtc *crtc,
> >> @@ -10970,6 +10961,9 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
> >> intel_crtc->plane = !pipe;
> >> }
> >>
> >> + intel_crtc->cursor_base = ~0;
> >> + intel_crtc->cursor_cntl = ~0;
> >> +
> >> init_waitqueue_head(&intel_crtc->vbl_wait);
> >>
> >> BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
> >> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> >> index 9bb70dc..9d1ff7b 100644
> >> --- a/drivers/gpu/drm/i915/intel_drv.h
> >> +++ b/drivers/gpu/drm/i915/intel_drv.h
> >> @@ -386,7 +386,8 @@ struct intel_crtc {
> >> uint32_t cursor_addr;
> >> int16_t cursor_x, cursor_y;
> >> int16_t cursor_width, cursor_height;
> >> - bool cursor_visible;
> >> + uint32_t cursor_cntl;
> >> + uint32_t cursor_base;
> >>
> >> struct intel_plane_config plane_config;
> >> struct intel_crtc_config config;
> >> --
> >> 1.8.3.2
> >>
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx at lists.freedesktop.org
> >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
>
> --
> - Antti
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list