[Intel-gfx] [PATCH v2 6/8] drm/i915: replace drm_get_encoder_name() with direct name field use

Jani Nikula jani.nikula at intel.com
Tue Jun 3 13:56:21 CEST 2014


Generated using semantic patches:

@@
expression E;
@@

- drm_get_encoder_name(&E)
+ E.name

@@
expression E;
@@

- drm_get_encoder_name(E)
+ E->name

v2: Turn drm_get_encoder_name(&E) into E.name instead of &(E)->name.

Acked-by: David Herrmann <dh.herrmann at gmail.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 16 ++++++++--------
 drivers/gpu/drm/i915/intel_dp.c      |  2 +-
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 6f2cad83e2f4..d092b087b99f 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2156,7 +2156,7 @@ static void intel_encoder_info(struct seq_file *m,
 
 	encoder = &intel_encoder->base;
 	seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
-		   encoder->base.id, drm_get_encoder_name(encoder));
+		   encoder->base.id, encoder->name);
 	for_each_connector_on_encoder(dev, encoder, intel_connector) {
 		struct drm_connector *connector = &intel_connector->base;
 		seq_printf(m, "\t\tconnector %d: type: %s, status: %s",
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 87e5a586457e..9d8ad7e55d47 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7206,7 +7206,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
 			encoder->base.base.id,
-			drm_get_encoder_name(&encoder->base),
+			encoder->base.name,
 			mode->base.id, mode->name);
 
 		if (encoder->mode_set)
@@ -7518,7 +7518,7 @@ void intel_write_eld(struct drm_encoder *encoder,
 			 connector->base.id,
 			 connector->name,
 			 connector->encoder->base.id,
-			 drm_get_encoder_name(connector->encoder));
+			 connector->encoder->name);
 
 	connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
 
@@ -7986,7 +7986,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
 		      connector->base.id, connector->name,
-		      encoder->base.id, drm_get_encoder_name(encoder));
+		      encoder->base.id, encoder->name);
 
 	/*
 	 * Algorithm gets a little messy:
@@ -8098,7 +8098,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
 		      connector->base.id, connector->name,
-		      encoder->base.id, drm_get_encoder_name(encoder));
+		      encoder->base.id, encoder->name);
 
 	if (old->load_detect_temp) {
 		to_intel_connector(connector)->new_encoder = NULL;
@@ -9701,7 +9701,7 @@ check_encoder_state(struct drm_device *dev)
 
 		DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
 			      encoder->base.base.id,
-			      drm_get_encoder_name(&encoder->base));
+			      encoder->base.name);
 
 		WARN(&encoder->new_crtc->base != encoder->base.crtc,
 		     "encoder's stage crtc doesn't match current crtc\n");
@@ -11526,7 +11526,7 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
 	if (encoder->connectors_active && !has_active_crtc) {
 		DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
 			      encoder->base.base.id,
-			      drm_get_encoder_name(&encoder->base));
+			      encoder->base.name);
 
 		/* Connector is active, but has no active pipe. This is
 		 * fallout from our resume register restoring. Disable
@@ -11534,7 +11534,7 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
 		if (encoder->base.crtc) {
 			DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
 				      encoder->base.base.id,
-				      drm_get_encoder_name(&encoder->base));
+				      encoder->base.name);
 			encoder->disable(encoder);
 		}
 
@@ -11654,7 +11654,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		encoder->connectors_active = false;
 		DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
 			      encoder->base.base.id,
-			      drm_get_encoder_name(&encoder->base),
+			      encoder->base.name,
 			      encoder->base.crtc ? "enabled" : "disabled",
 			      pipe_name(pipe));
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d78d264a0c42..679c46198c3b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2985,7 +2985,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 
 	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
-			      drm_get_encoder_name(&intel_encoder->base));
+			      intel_encoder->base.name);
 		intel_dp_start_link_train(intel_dp);
 		intel_dp_complete_link_train(intel_dp);
 		intel_dp_stop_link_train(intel_dp);
-- 
1.9.1




More information about the Intel-gfx mailing list