[Intel-gfx] [PATCH 26/40] drm/i915: Parametrize VLV_DDL registers

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The VLV/CHV DDL registers are uniform, and neatly enough the register
offsets are sane so we can easily unify them to a single set of defines
and just pass the pipe as the parameter to compute the register offset.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 54 ++++++++++-------------------------------
 drivers/gpu/drm/i915/intel_pm.c | 52 ++++++++++++++++++---------------------
 2 files changed, 36 insertions(+), 70 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9fab647..60dd19c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4018,47 +4018,19 @@ enum punit_power_well {
 /* drain latency register values*/
 #define DRAIN_LATENCY_PRECISION_32	32
 #define DRAIN_LATENCY_PRECISION_64	64
-#define VLV_DDL1			(VLV_DISPLAY_BASE + 0x70050)
-#define DDL_CURSORA_PRECISION_64	(1<<31)
-#define DDL_CURSORA_PRECISION_32	(0<<31)
-#define DDL_CURSORA_SHIFT		24
-#define DDL_SPRITEB_PRECISION_64	(1<<23)
-#define DDL_SPRITEB_PRECISION_32	(0<<23)
-#define DDL_SPRITEB_SHIFT		16
-#define DDL_SPRITEA_PRECISION_64	(1<<15)
-#define DDL_SPRITEA_PRECISION_32	(0<<15)
-#define DDL_SPRITEA_SHIFT		8
-#define DDL_PLANEA_PRECISION_64		(1<<7)
-#define DDL_PLANEA_PRECISION_32		(0<<7)
-#define DDL_PLANEA_SHIFT		0
-
-#define VLV_DDL2			(VLV_DISPLAY_BASE + 0x70054)
-#define DDL_CURSORB_PRECISION_64	(1<<31)
-#define DDL_CURSORB_PRECISION_32	(0<<31)
-#define DDL_CURSORB_SHIFT		24
-#define DDL_SPRITED_PRECISION_64	(1<<23)
-#define DDL_SPRITED_PRECISION_32	(0<<23)
-#define DDL_SPRITED_SHIFT		16
-#define DDL_SPRITEC_PRECISION_64	(1<<15)
-#define DDL_SPRITEC_PRECISION_32	(0<<15)
-#define DDL_SPRITEC_SHIFT		8
-#define DDL_PLANEB_PRECISION_64		(1<<7)
-#define DDL_PLANEB_PRECISION_32		(0<<7)
-#define DDL_PLANEB_SHIFT		0
-
-#define VLV_DDL3			(VLV_DISPLAY_BASE + 0x70058)
-#define DDL_CURSORC_PRECISION_64	(1<<31)
-#define DDL_CURSORC_PRECISION_32	(0<<31)
-#define DDL_CURSORC_SHIFT		24
-#define DDL_SPRITEF_PRECISION_64	(1<<23)
-#define DDL_SPRITEF_PRECISION_32	(0<<23)
-#define DDL_SPRITEF_SHIFT		16
-#define DDL_SPRITEE_PRECISION_64	(1<<15)
-#define DDL_SPRITEE_PRECISION_32	(0<<15)
-#define DDL_SPRITEE_SHIFT		8
-#define DDL_PLANEC_PRECISION_64		(1<<7)
-#define DDL_PLANEC_PRECISION_32		(0<<7)
-#define DDL_PLANEC_SHIFT		0
+#define VLV_DDL(pipe)			(VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe))
+#define DDL_CURSOR_PRECISION_64		(1<<31)
+#define DDL_CURSOR_PRECISION_32		(0<<31)
+#define DDL_CURSOR_SHIFT		24
+#define DDL_SPRITE1_PRECISION_64	(1<<23)
+#define DDL_SPRITE1_PRECISION_32	(0<<23)
+#define DDL_SPRITE1_SHIFT		16
+#define DDL_SPRITE0_PRECISION_64	(1<<15)
+#define DDL_SPRITE0_PRECISION_32	(0<<15)
+#define DDL_SPRITE0_SHIFT		8
+#define DDL_PLANE_PRECISION_64		(1<<7)
+#define DDL_PLANE_PRECISION_32		(0<<7)
+#define DDL_PLANE_SHIFT			0
 
 /* FIFO watermark sizes etc */
 #define G4X_FIFO_LINE_SIZE	64
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index dc858b5..f0516a7 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1275,35 +1275,29 @@ static bool vlv_compute_drain_latency(struct drm_device *dev,
 static void vlv_update_drain_latency(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int planea_prec, planea_dl, planeb_prec, planeb_dl;
-	int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl;
-	int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is
-							either 16 or 32 */
-
-	/* For plane A, Cursor A */
-	if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl,
-				      &cursor_prec_mult, &cursora_dl)) {
-		cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
-			DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_64;
-		planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
-			DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_64;
-
-		I915_WRITE(VLV_DDL1, cursora_prec |
-				(cursora_dl << DDL_CURSORA_SHIFT) |
-				planea_prec | planea_dl);
-	}
-
-	/* For plane B, Cursor B */
-	if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl,
-				      &cursor_prec_mult, &cursorb_dl)) {
-		cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
-			DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_64;
-		planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
-			DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_64;
-
-		I915_WRITE(VLV_DDL2, cursorb_prec |
-				(cursorb_dl << DDL_CURSORB_SHIFT) |
-				planeb_prec | planeb_dl);
+	enum pipe pipe;
+
+	for_each_pipe(pipe) {
+		int plane_prec, plane_dl;
+		int cursor_prec, cursor_dl;
+		int plane_prec_mult, cursor_prec_mult;
+
+		if (!vlv_compute_drain_latency(dev, pipe, &plane_prec_mult, &plane_dl,
+					       &cursor_prec_mult, &cursor_dl))
+			continue;
+
+		/*
+		 * FIXME CHV spec still lists 16 and 32 as the precision
+		 * values. Need to figure out if spec is outdated or what.
+		 */
+		cursor_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_64) ?
+			DDL_CURSOR_PRECISION_64 : DDL_CURSOR_PRECISION_32;
+		plane_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_64) ?
+			DDL_PLANE_PRECISION_64 : DDL_PLANE_PRECISION_32;
+
+		I915_WRITE(VLV_DDL(pipe), cursor_prec |
+			   (cursor_dl << DDL_CURSOR_SHIFT) |
+			   plane_prec | (plane_dl << DDL_PLANE_SHIFT));
 	}
 }
 
-- 
1.8.5.5