[Intel-gfx] [PATCH 20/40] drm/i915: Add per-pipe power wells for chv

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Sat Jun 28 01:04:11 CEST 2014


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

CHV has a power well for each pipe. Add the code to deal with them.

The Punit in current hardware doesn't seem ready for this yet, so
leave it iffed out.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  12 ++++
 drivers/gpu/drm/i915/intel_pm.c | 126 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 138 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 19e68d6..3d1fef4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -499,6 +499,18 @@
 #define   DSPFREQSTAT_MASK			(0x3 << DSPFREQSTAT_SHIFT)
 #define   DSPFREQGUAR_SHIFT			14
 #define   DSPFREQGUAR_MASK			(0x3 << DSPFREQGUAR_SHIFT)
+#define   _DP_SSC(val, pipe)			((val) << (2 * (pipe)))
+#define   DP_SSC_MASK(pipe)			_DP_SSC(0x3, (pipe))
+#define   DP_SSC_PWR_ON(pipe)			_DP_SSC(0x0, (pipe))
+#define   DP_SSC_CLK_GATE(pipe)			_DP_SSC(0x1, (pipe))
+#define   DP_SSC_RESET(pipe)			_DP_SSC(0x2, (pipe))
+#define   DP_SSC_PWR_GATE(pipe)			_DP_SSC(0x3, (pipe))
+#define   _DP_SSS(val, pipe)			((val) << (2 * (pipe) + 16))
+#define   DP_SSS_MASK(pipe)			_DP_SSS(0x3, (pipe))
+#define   DP_SSS_PWR_ON(pipe)			_DP_SSS(0x0, (pipe))
+#define   DP_SSS_CLK_GATE(pipe)			_DP_SSS(0x1, (pipe))
+#define   DP_SSS_RESET(pipe)			_DP_SSS(0x2, (pipe))
+#define   DP_SSS_PWR_GATE(pipe)			_DP_SSS(0x3, (pipe))
 
 /* See the PUNIT HAS v0.8 for the below bits */
 enum punit_power_well {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 46394fc..de5416b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6258,6 +6258,95 @@ static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
 	vlv_set_power_well(dev_priv, power_well, false);
 }
 
+static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	enum pipe pipe = power_well->data;
+	bool enabled;
+	u32 state, ctrl;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
+	enabled = state == DP_SSS_PWR_ON(pipe);
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
+	WARN_ON(ctrl << 16 != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
+				    struct i915_power_well *power_well,
+				    bool enable)
+{
+	enum pipe pipe = power_well->data;
+	u32 state;
+	u32 ctrl;
+
+	state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+	ctrl &= ~DP_SSC_MASK(pipe);
+	ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
+	vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
+				       struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	chv_set_pipe_power_well(dev_priv, power_well, true);
+}
+
+static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	chv_set_pipe_power_well(dev_priv, power_well, false);
+}
+
 static void check_power_well_state(struct drm_i915_private *dev_priv,
 				   struct i915_power_well *power_well)
 {
@@ -6427,6 +6516,18 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
 	BIT(POWER_DOMAIN_INIT))
 
+#define CHV_PIPE_A_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_A) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_B_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_B) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_C_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_C) |	\
+	BIT(POWER_DOMAIN_INIT))
+
 #define CHV_DPIO_CMN_BC_POWER_DOMAINS (		\
 	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
 	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
@@ -6568,6 +6669,13 @@ static struct i915_power_well vlv_power_wells[] = {
 	},
 };
 
+static const struct i915_power_well_ops chv_pipe_power_well_ops = {
+	.sync_hw = chv_pipe_power_well_sync_hw,
+	.enable = chv_pipe_power_well_enable,
+	.disable = chv_pipe_power_well_disable,
+	.is_enabled = chv_pipe_power_well_enabled,
+};
+
 static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
 	.sync_hw = vlv_power_well_sync_hw,
 	.enable = chv_dpio_cmn_power_well_enable,
@@ -6589,6 +6697,24 @@ static struct i915_power_well chv_power_wells[] = {
 		.data = PUNIT_POWER_WELL_DISP2D,
 		.ops = &vlv_display_power_well_ops,
 	},
+	{
+		.name = "pipe-a",
+		.domains = CHV_PIPE_A_POWER_DOMAINS,
+		.data = PIPE_A,
+		.ops = &chv_pipe_power_well_ops,
+	},
+	{
+		.name = "pipe-b",
+		.domains = CHV_PIPE_B_POWER_DOMAINS,
+		.data = PIPE_B,
+		.ops = &chv_pipe_power_well_ops,
+	},
+	{
+		.name = "pipe-c",
+		.domains = CHV_PIPE_C_POWER_DOMAINS,
+		.data = PIPE_C,
+		.ops = &chv_pipe_power_well_ops,
+	},
 #endif
 	{
 		.name = "dpio-common-bc",
-- 
1.8.5.5




More information about the Intel-gfx mailing list