[Intel-gfx] [PATCH v4] drm/i915: rewrite hsw/bdw audio codec enable/disable sequences
Jani Nikula
jani.nikula at intel.com
Tue Nov 4 09:30:23 CET 2014
There's some serious confusion regarding ELD valid bit that gets set and
cleared back and forth etc. Rewrite it all based on the documented audio
codec enable/disable sequences.
v3: replace vblank wait with a comment
v4: expand the comment on what should be done with the vblank wait
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/intel_audio.c | 115 ++++++++++++++++---------------------
1 file changed, 51 insertions(+), 64 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 821514c95229..4dcfc46d5725 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -132,14 +132,26 @@ static void g4x_audio_codec_enable(struct drm_connector *connector,
static void hsw_audio_codec_disable(struct intel_encoder *encoder)
{
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = encoder->base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ enum pipe pipe = intel_crtc->pipe;
uint32_t tmp;
+ DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe));
+
+ /* Disable timestamps */
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
+ tmp |= AUD_CONFIG_N_PROG_ENABLE;
+ tmp &= ~AUD_CONFIG_UPPER_N_MASK;
+ tmp &= ~AUD_CONFIG_LOWER_N_MASK;
+ if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ tmp |= AUD_CONFIG_N_VALUE_INDEX;
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+ /* Invalidate ELD */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
- tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+ tmp &= ~(AUDIO_ELD_VALID_A << (pipe * 4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
}
@@ -149,77 +161,52 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
- uint8_t *eld = connector->eld;
- uint32_t eldv;
+ enum pipe pipe = intel_crtc->pipe;
+ const uint8_t *eld = connector->eld;
uint32_t tmp;
int len, i;
- enum pipe pipe = intel_crtc->pipe;
- enum port port;
- int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
- int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
- int aud_config = HSW_AUD_CFG(pipe);
- int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
- /* Audio output enable */
- DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
- tmp = I915_READ(aud_cntrl_st2);
- tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
- I915_WRITE(aud_cntrl_st2, tmp);
- POSTING_READ(aud_cntrl_st2);
-
- /* Set ELD valid state */
- tmp = I915_READ(aud_cntrl_st2);
- DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
- tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
- I915_WRITE(aud_cntrl_st2, tmp);
- tmp = I915_READ(aud_cntrl_st2);
- DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
-
- /* Enable HDMI mode */
- tmp = I915_READ(aud_config);
- DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
- /* clear N_programing_enable and N_value_index */
- tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
- I915_WRITE(aud_config, tmp);
+ DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
+ pipe_name(pipe), eld[2]);
- DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
-
- eldv = AUDIO_ELD_VALID_A << (pipe * 4);
-
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
- I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
- else
- I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
-
- if (intel_eld_uptodate(connector,
- aud_cntrl_st2, eldv,
- aud_cntl_st, IBX_ELD_ADDRESS_MASK,
- hdmiw_hdmiedid))
- return;
+ /* Enable audio presence detect, invalidate ELD */
+ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+ tmp |= AUDIO_OUTPUT_ENABLE_A << (pipe * 4);
+ tmp &= ~(AUDIO_ELD_VALID_A << (pipe * 4));
+ I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
- tmp = I915_READ(aud_cntrl_st2);
- tmp &= ~eldv;
- I915_WRITE(aud_cntrl_st2, tmp);
+ /*
+ * FIXME: We're supposed to wait for vblank here, but we have vblanks
+ * disabled during the mode set. The proper fix would be to push the
+ * rest of the setup into a vblank work item, queued here, but the
+ * infrastructure is not there yet.
+ */
- tmp = I915_READ(aud_cntl_st);
+ /* Reset ELD write address */
+ tmp = I915_READ(HSW_AUD_DIP_ELD_CTRL(pipe));
tmp &= ~IBX_ELD_ADDRESS_MASK;
- I915_WRITE(aud_cntl_st, tmp);
- port = (tmp >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
- DRM_DEBUG_DRIVER("port num:%d\n", port);
+ I915_WRITE(HSW_AUD_DIP_ELD_CTRL(pipe), tmp);
- len = min_t(int, eld[2], 21); /* 84 bytes of hw ELD buffer */
- DRM_DEBUG_DRIVER("ELD size %d\n", len);
+ /* Up to 84 bytes of hw ELD buffer */
+ len = min_t(int, eld[2], 21);
for (i = 0; i < len; i++)
- I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
-
- tmp = I915_READ(aud_cntrl_st2);
- tmp |= eldv;
- I915_WRITE(aud_cntrl_st2, tmp);
+ I915_WRITE(HSW_AUD_EDID_DATA(pipe), *((uint32_t *)eld + i));
- /* XXX: Transitional */
+ /* ELD valid */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
- tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+ tmp |= AUDIO_ELD_VALID_A << (pipe * 4);
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+
+ /* Enable timestamps */
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
+ if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ tmp |= AUD_CONFIG_N_VALUE_INDEX;
+ else
+ tmp |= audio_config_hdmi_pixel_clock(mode);
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
}
static void ilk_audio_codec_enable(struct drm_connector *connector,
--
2.1.1
More information about the Intel-gfx
mailing list