[Intel-gfx] [PATCH 09/17] drm/crtc-helper: Transitional functions using atomic plane helpers

Sean Paul seanpaul at chromium.org
Wed Nov 5 18:42:25 CET 2014


On Sun, Nov 02, 2014 at 02:19:22PM +0100, Daniel Vetter wrote:
> These two functions allow drivers to reuse their atomic plane helpers
> functions for the primary plane to implement the interfaces required
> by the crtc helpers for the legacy ->set_config callback.
>
> This is purely transitional and won't be used once the driver is fully
> converted. But it allows partial conversions to the atomic plane
> helpers which are functional.
>
> v2:
> - Use ->atomic_duplicate_state if available.
> - Don't forget to run crtc_funcs->atomic_check.
>
> v3: Shift source coordinates correctly for 16.16 fixed point.
>
> v4: Don't forget to call ->atomic_destroy_state if available.
>
> v5: Fixup kerneldoc.
>
> v6: Reuse the plane_commit function from the transitional plane
> helpers to avoid too much duplication.
>
> v7:
> - Remove some stale comment.
> - Correctly handle the lack of plane->state object, necessary for
>   transitional use.
>
> v8: Fixup an embarrassing h/vdisplay mixup.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>

Reviewed-by: Sean Paul <seanpaul at chromium.org>

> ---
>  drivers/gpu/drm/drm_crtc_helper.c  | 110 +++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/drm_plane_helper.c |  10 ++--
>  include/drm/drm_crtc.h             |   4 ++
>  include/drm/drm_crtc_helper.h      |   7 +++
>  include/drm/drm_plane_helper.h     |   4 ++
>  5 files changed, 130 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
> index 6c65a0a28fbd..95ecbb131053 100644
> --- a/drivers/gpu/drm/drm_crtc_helper.c
> +++ b/drivers/gpu/drm/drm_crtc_helper.c
> @@ -38,6 +38,7 @@
>  #include <drm/drm_fourcc.h>
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_fb_helper.h>
> +#include <drm/drm_plane_helper.h>
>  #include <drm/drm_edid.h>
>
>  MODULE_AUTHOR("David Airlie, Jesse Barnes");
> @@ -888,3 +889,112 @@ void drm_helper_resume_force_mode(struct drm_device *dev)
>   drm_modeset_unlock_all(dev);
>  }
>  EXPORT_SYMBOL(drm_helper_resume_force_mode);
> +
> +/**
> + * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers
> + * @crtc: DRM CRTC
> + * @mode: DRM display mode which userspace requested
> + * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks
> + * @x: x offset of the CRTC scanout area on the underlying framebuffer
> + * @y: y offset of the CRTC scanout area on the underlying framebuffer
> + * @old_fb: previous framebuffer
> + *
> + * This function implements a callback useable as the ->mode_set callback
> + * required by the crtc helpers. Besides the atomic plane helper functions for
> + * the primary plane the driver must also provide the ->mode_set_nofb callback
> + * to set up the crtc.
> + *
> + * This is a transitional helper useful for converting drivers to the atomic
> + * interfaces.
> + */
> +int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> +     struct drm_display_mode *adjusted_mode, int x, int y,
> +     struct drm_framebuffer *old_fb)
> +{
> + struct drm_crtc_state *crtc_state;
> + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
> + int ret;
> +
> + if (crtc->funcs->atomic_duplicate_state)
> + crtc_state = crtc->funcs->atomic_duplicate_state(crtc);
> + else if (crtc->state)
> + crtc_state = kmemdup(crtc->state, sizeof(*crtc_state),
> +     GFP_KERNEL);
> + else
> + crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
> + if (!crtc_state)
> + return -ENOMEM;
> +
> + crtc_state->enable = true;
> + crtc_state->planes_changed = true;
> + drm_mode_copy(&crtc_state->mode, mode);
> + drm_mode_copy(&crtc_state->adjusted_mode, adjusted_mode);
> +
> + if (crtc_funcs->atomic_check) {
> + ret = crtc_funcs->atomic_check(crtc, crtc_state);
> + if (ret) {
> + kfree(crtc_state);
> +
> + return ret;
> + }
> + }
> +
> + swap(crtc->state, crtc_state);
> +
> + crtc_funcs->mode_set_nofb(crtc);
> +
> + if (crtc_state) {
> + if (crtc->funcs->atomic_destroy_state)
> + crtc->funcs->atomic_destroy_state(crtc, crtc_state);
> + else
> + kfree(crtc_state);
> + }
> +
> + return drm_helper_crtc_mode_set_base(crtc, x, y, old_fb);
> +}
> +EXPORT_SYMBOL(drm_helper_crtc_mode_set);
> +
> +/**
> + * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers
> + * @crtc: DRM CRTC
> + * @x: x offset of the CRTC scanout area on the underlying framebuffer
> + * @y: y offset of the CRTC scanout area on the underlying framebuffer
> + * @old_fb: previous framebuffer
> + *
> + * This function implements a callback useable as the ->mode_set_base used
> + * required by the crtc helpers. The driver must provide the atomic plane helper
> + * functions for the primary plane.
> + *
> + * This is a transitional helper useful for converting drivers to the atomic
> + * interfaces.
> + */
> +int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> +  struct drm_framebuffer *old_fb)
> +{
> + struct drm_plane_state *plane_state;
> + struct drm_plane *plane = crtc->primary;
> +
> + if (plane->funcs->atomic_duplicate_state)
> + plane_state = plane->funcs->atomic_duplicate_state(plane);
> + else if (plane->state)
> + plane_state = kmemdup(plane->state, sizeof(*plane_state),
> +      GFP_KERNEL);
> + else
> + plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL);
> + if (!plane_state)
> + return -ENOMEM;
> +
> + plane_state->crtc = crtc;
> + plane_state->fb = crtc->primary->fb;
> + plane_state->crtc_x = 0;
> + plane_state->crtc_y = 0;
> + plane_state->crtc_h = crtc->mode.vdisplay;
> + plane_state->crtc_w = crtc->mode.hdisplay;
> + plane_state->src_x = x << 16;
> + plane_state->src_y = y << 16;
> + plane_state->src_h = crtc->mode.vdisplay << 16;
> + plane_state->src_w = crtc->mode.hdisplay << 16;
> +
> + return drm_plane_helper_commit(plane, plane_state, old_fb);
> +}
> +EXPORT_SYMBOL(drm_helper_crtc_mode_set_base);
> diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
> index 45aa8c98e3fb..40ecb2c6e858 100644
> --- a/drivers/gpu/drm/drm_plane_helper.c
> +++ b/drivers/gpu/drm/drm_plane_helper.c
> @@ -370,9 +370,9 @@ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
>  }
>  EXPORT_SYMBOL(drm_crtc_init);
>
> -static int
> -plane_commit(struct drm_plane *plane, struct drm_plane_state *plane_state,
> -     struct drm_framebuffer *old_fb)
> +int drm_plane_helper_commit(struct drm_plane *plane,
> +    struct drm_plane_state *plane_state,
> +    struct drm_framebuffer *old_fb)
>  {
>   struct drm_plane_helper_funcs *plane_funcs;
>   struct drm_crtc *crtc[2];
> @@ -497,7 +497,7 @@ int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
>   plane_state->src_h = src_h;
>   plane_state->src_w = src_w;
>
> - return plane_commit(plane, plane_state, plane->fb);
> + return drm_plane_helper_commit(plane, plane_state, plane->fb);
>  }
>  EXPORT_SYMBOL(drm_plane_helper_update);
>
> @@ -536,6 +536,6 @@ int drm_plane_helper_disable(struct drm_plane *plane)
>   plane_state->crtc = NULL;
>   plane_state->fb = NULL;
>
> - return plane_commit(plane, plane_state, plane->fb);
> + return drm_plane_helper_commit(plane, plane_state, plane->fb);
>  }
>  EXPORT_SYMBOL(drm_plane_helper_disable);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index d0068b7af678..77ff8992a3b7 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -230,6 +230,7 @@ struct drm_atomic_state;
>   * struct drm_crtc_state - mutable crtc state
>   * @enable: whether the CRTC should be enabled, gates all other state
>   * @planes_changed: for use by helpers and drivers when computing state updates
> + * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
>   * @mode: current mode timings
>   * @event: optional pointer to a DRM event to signal upon completion of the
>   * state update
> @@ -241,6 +242,9 @@ struct drm_crtc_state {
>   /* computed state bits used by helpers and drivers */
>   bool planes_changed : 1;
>
> + /* adjusted_mode: for use by helpers and drivers */
> + struct drm_display_mode adjusted_mode;
> +
>   struct drm_display_mode mode;
>
>   struct drm_pending_vblank_event *event;
> diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
> index adec48b27aa5..7adbb65ea8ae 100644
> --- a/include/drm/drm_crtc_helper.h
> +++ b/include/drm/drm_crtc_helper.h
> @@ -68,6 +68,7 @@ struct drm_crtc_helper_funcs {
>   int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
>   struct drm_display_mode *adjusted_mode, int x, int y,
>   struct drm_framebuffer *old_fb);
> + void (*mode_set_nofb)(struct drm_crtc *crtc);
>
>   /* Move the crtc on the current fb to the given position *optional* */
>   int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
> @@ -167,6 +168,12 @@ static inline void drm_connector_helper_add(struct drm_connector *connector,
>
>  extern void drm_helper_resume_force_mode(struct drm_device *dev);
>
> +int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> +     struct drm_display_mode *adjusted_mode, int x, int y,
> +     struct drm_framebuffer *old_fb);
> +int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> +  struct drm_framebuffer *old_fb);
> +
>  /* drm_probe_helper.c */
>  extern int drm_helper_probe_single_connector_modes(struct drm_connector
>     *connector, uint32_t maxX,
> diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
> index 8a0709704af0..62acb3c940b4 100644
> --- a/include/drm/drm_plane_helper.h
> +++ b/include/drm/drm_plane_helper.h
> @@ -102,4 +102,8 @@ int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
>      uint32_t src_w, uint32_t src_h);
>  int drm_plane_helper_disable(struct drm_plane *plane);
>
> +/* For use by drm_crtc_helper.c */
> +int drm_plane_helper_commit(struct drm_plane *plane,
> +    struct drm_plane_state *plane_state,
> +    struct drm_framebuffer *old_fb);
>  #endif
> --
> 2.1.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel



More information about the Intel-gfx mailing list